Struct aws_sdk_connect::client::fluent_builders::GetMetricData
source · [−]pub struct GetMetricData { /* private fields */ }
Expand description
Fluent builder constructing a request to GetMetricData
.
Gets historical metric data from the specified Amazon Connect instance.
For a description of each historical metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.
Implementations
sourceimpl GetMetricData
impl GetMetricData
sourcepub async fn send(
self
) -> Result<GetMetricDataOutput, SdkError<GetMetricDataError>>
pub async fn send(
self
) -> Result<GetMetricDataOutput, SdkError<GetMetricDataError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn into_paginator(self) -> GetMetricDataPaginator
pub fn into_paginator(self) -> GetMetricDataPaginator
Create a paginator for this request
Paginators are used by calling send().await
which returns a Stream
.
sourcepub fn instance_id(self, input: impl Into<String>) -> Self
pub fn instance_id(self, input: impl Into<String>) -> Self
The identifier of the Amazon Connect instance. You can find the instanceId in the ARN of the instance.
sourcepub fn set_instance_id(self, input: Option<String>) -> Self
pub fn set_instance_id(self, input: Option<String>) -> Self
The identifier of the Amazon Connect instance. You can find the instanceId in the ARN of the instance.
sourcepub fn start_time(self, input: DateTime) -> Self
pub fn start_time(self, input: DateTime) -> Self
The timestamp, in UNIX Epoch time format, at which to start the reporting interval for the retrieval of historical metrics data. The time must be specified using a multiple of 5 minutes, such as 10:05, 10:10, 10:15.
The start time cannot be earlier than 24 hours before the time of the request. Historical metrics are available only for 24 hours.
sourcepub fn set_start_time(self, input: Option<DateTime>) -> Self
pub fn set_start_time(self, input: Option<DateTime>) -> Self
The timestamp, in UNIX Epoch time format, at which to start the reporting interval for the retrieval of historical metrics data. The time must be specified using a multiple of 5 minutes, such as 10:05, 10:10, 10:15.
The start time cannot be earlier than 24 hours before the time of the request. Historical metrics are available only for 24 hours.
sourcepub fn end_time(self, input: DateTime) -> Self
pub fn end_time(self, input: DateTime) -> Self
The timestamp, in UNIX Epoch time format, at which to end the reporting interval for the retrieval of historical metrics data. The time must be specified using an interval of 5 minutes, such as 11:00, 11:05, 11:10, and must be later than the start time timestamp.
The time range between the start and end time must be less than 24 hours.
sourcepub fn set_end_time(self, input: Option<DateTime>) -> Self
pub fn set_end_time(self, input: Option<DateTime>) -> Self
The timestamp, in UNIX Epoch time format, at which to end the reporting interval for the retrieval of historical metrics data. The time must be specified using an interval of 5 minutes, such as 11:00, 11:05, 11:10, and must be later than the start time timestamp.
The time range between the start and end time must be less than 24 hours.
sourcepub fn filters(self, input: Filters) -> Self
pub fn filters(self, input: Filters) -> Self
The queues, up to 100, or channels, to use to filter the metrics returned. Metric data is retrieved only for the resources associated with the queues or channels included in the filter. You can include both queue IDs and queue ARNs in the same request. VOICE, CHAT, and TASK channels are supported.
To filter by Queues
, enter the queue ID/ARN, not the name of the queue.
sourcepub fn set_filters(self, input: Option<Filters>) -> Self
pub fn set_filters(self, input: Option<Filters>) -> Self
The queues, up to 100, or channels, to use to filter the metrics returned. Metric data is retrieved only for the resources associated with the queues or channels included in the filter. You can include both queue IDs and queue ARNs in the same request. VOICE, CHAT, and TASK channels are supported.
To filter by Queues
, enter the queue ID/ARN, not the name of the queue.
sourcepub fn groupings(self, input: Grouping) -> Self
pub fn groupings(self, input: Grouping) -> Self
Appends an item to Groupings
.
To override the contents of this collection use set_groupings
.
The grouping applied to the metrics returned. For example, when results are grouped by queue, the metrics returned are grouped by queue. The values returned apply to the metrics for each queue rather than aggregated for all queues.
If no grouping is specified, a summary of metrics for all queues is returned.
sourcepub fn set_groupings(self, input: Option<Vec<Grouping>>) -> Self
pub fn set_groupings(self, input: Option<Vec<Grouping>>) -> Self
The grouping applied to the metrics returned. For example, when results are grouped by queue, the metrics returned are grouped by queue. The values returned apply to the metrics for each queue rather than aggregated for all queues.
If no grouping is specified, a summary of metrics for all queues is returned.
sourcepub fn historical_metrics(self, input: HistoricalMetric) -> Self
pub fn historical_metrics(self, input: HistoricalMetric) -> Self
Appends an item to HistoricalMetrics
.
To override the contents of this collection use set_historical_metrics
.
The metrics to retrieve. Specify the name, unit, and statistic for each metric. The following historical metrics are available. For a description of each metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.
This API does not support a contacts incoming metric (there's no CONTACTS_INCOMING metric missing from the documented list).
- ABANDON_TIME
-
Unit: SECONDS
Statistic: AVG
- AFTER_CONTACT_WORK_TIME
-
Unit: SECONDS
Statistic: AVG
- API_CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CALLBACK_CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_ABANDONED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_AGENT_HUNG_UP_FIRST
-
Unit: COUNT
Statistic: SUM
- CONTACTS_CONSULTED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED_INCOMING
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED_OUTBOUND
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HOLD_ABANDONS
-
Unit: COUNT
Statistic: SUM
- CONTACTS_MISSED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_QUEUED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_IN
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_IN_FROM_QUEUE
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_OUT
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_OUT_FROM_QUEUE
-
Unit: COUNT
Statistic: SUM
- HANDLE_TIME
-
Unit: SECONDS
Statistic: AVG
- HOLD_TIME
-
Unit: SECONDS
Statistic: AVG
- INTERACTION_AND_HOLD_TIME
-
Unit: SECONDS
Statistic: AVG
- INTERACTION_TIME
-
Unit: SECONDS
Statistic: AVG
- OCCUPANCY
-
Unit: PERCENT
Statistic: AVG
- QUEUE_ANSWER_TIME
-
Unit: SECONDS
Statistic: AVG
- QUEUED_TIME
-
Unit: SECONDS
Statistic: MAX
- SERVICE_LEVEL
-
You can include up to 20 SERVICE_LEVEL metrics in a request.
Unit: PERCENT
Statistic: AVG
Threshold: For
ThresholdValue
, enter any whole number from 1 to 604800 (inclusive), in seconds. ForComparison
, you must enterLT
(for "Less than").
sourcepub fn set_historical_metrics(
self,
input: Option<Vec<HistoricalMetric>>
) -> Self
pub fn set_historical_metrics(
self,
input: Option<Vec<HistoricalMetric>>
) -> Self
The metrics to retrieve. Specify the name, unit, and statistic for each metric. The following historical metrics are available. For a description of each metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.
This API does not support a contacts incoming metric (there's no CONTACTS_INCOMING metric missing from the documented list).
- ABANDON_TIME
-
Unit: SECONDS
Statistic: AVG
- AFTER_CONTACT_WORK_TIME
-
Unit: SECONDS
Statistic: AVG
- API_CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CALLBACK_CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_ABANDONED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_AGENT_HUNG_UP_FIRST
-
Unit: COUNT
Statistic: SUM
- CONTACTS_CONSULTED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED_INCOMING
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HANDLED_OUTBOUND
-
Unit: COUNT
Statistic: SUM
- CONTACTS_HOLD_ABANDONS
-
Unit: COUNT
Statistic: SUM
- CONTACTS_MISSED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_QUEUED
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_IN
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_IN_FROM_QUEUE
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_OUT
-
Unit: COUNT
Statistic: SUM
- CONTACTS_TRANSFERRED_OUT_FROM_QUEUE
-
Unit: COUNT
Statistic: SUM
- HANDLE_TIME
-
Unit: SECONDS
Statistic: AVG
- HOLD_TIME
-
Unit: SECONDS
Statistic: AVG
- INTERACTION_AND_HOLD_TIME
-
Unit: SECONDS
Statistic: AVG
- INTERACTION_TIME
-
Unit: SECONDS
Statistic: AVG
- OCCUPANCY
-
Unit: PERCENT
Statistic: AVG
- QUEUE_ANSWER_TIME
-
Unit: SECONDS
Statistic: AVG
- QUEUED_TIME
-
Unit: SECONDS
Statistic: MAX
- SERVICE_LEVEL
-
You can include up to 20 SERVICE_LEVEL metrics in a request.
Unit: PERCENT
Statistic: AVG
Threshold: For
ThresholdValue
, enter any whole number from 1 to 604800 (inclusive), in seconds. ForComparison
, you must enterLT
(for "Less than").
sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.
sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.
sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of results to return per page.
sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of results to return per page.
Trait Implementations
sourceimpl Clone for GetMetricData
impl Clone for GetMetricData
sourcefn clone(&self) -> GetMetricData
fn clone(&self) -> GetMetricData
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for GetMetricData
impl Send for GetMetricData
impl Sync for GetMetricData
impl Unpin for GetMetricData
impl !UnwindSafe for GetMetricData
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more