Struct aws_sdk_cognitoidentityprovider::operation::admin_create_user::builders::AdminCreateUserInputBuilder

#[non_exhaustive]
pub struct AdminCreateUserInputBuilder { /* private fields */ }

A builder for AdminCreateUserInput.

Implementations

impl AdminCreateUserInputBuilder

pub fn user_pool_id(self, input: impl Into<String>) -> Self

The user pool ID for the user pool where the user will be created.

This field is required.

pub fn set_user_pool_id(self, input: Option<String>) -> Self

The user pool ID for the user pool where the user will be created.

pub fn get_user_pool_id(&self) -> &Option<String>

The user pool ID for the user pool where the user will be created.

pub fn username(self, input: impl Into<String>) -> Self

The value that you want to set as the username sign-in attribute. The following conditions apply to the username parameter.

• The username can't be a duplicate of another username in the same user pool.

• You can't change the value of a username after you create it.

• You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a username value. For more information, see Customizing sign-in attributes.

This field is required.

pub fn set_username(self, input: Option<String>) -> Self

The value that you want to set as the username sign-in attribute. The following conditions apply to the username parameter.

• The username can't be a duplicate of another username in the same user pool.

• You can't change the value of a username after you create it.

• You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a username value. For more information, see Customizing sign-in attributes.

pub fn get_username(&self) -> &Option<String>

The value that you want to set as the username sign-in attribute. The following conditions apply to the username parameter.

• The username can't be a duplicate of another username in the same user pool.

• You can't change the value of a username after you create it.

• You can only provide a value if usernames are a valid sign-in attribute for your user pool. If your user pool only supports phone numbers or email addresses as sign-in attributes, Amazon Cognito automatically generates a username value. For more information, see Customizing sign-in attributes.

pub fn user_attributes(self, input: AttributeType) -> Self

Appends an item to user_attributes.

To override the contents of this collection use set_user_attributes.

An array of name-value pairs that contain user attributes and attribute values to be set for the user to be created. You can create a user without specifying any attributes other than Username. However, any attributes that you specify as required (when creating a user pool or in the Attributes tab of the console) either you should supply (in your call to AdminCreateUser) or the user should supply (when they sign up in response to your welcome message).

For custom attributes, you must prepend the custom: prefix to the attribute name.

To send a message inviting the user to sign up, you must specify the user's email address or phone number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.

In your call to AdminCreateUser, you can set the email_verified attribute to True, and you can set the phone_number_verified attribute to True. You can also do this by calling AdminUpdateUserAttributes.

• email: The email address of the user to whom the message that contains the code and username will be sent. Required if the email_verified attribute is set to True, or if "EMAIL" is specified in the DesiredDeliveryMediums parameter.

• phone_number: The phone number of the user to whom the message that contains the code and username will be sent. Required if the phone_number_verified attribute is set to True, or if "SMS" is specified in the DesiredDeliveryMediums parameter.

pub fn set_user_attributes(self, input: Option<Vec<AttributeType>>) -> Self

An array of name-value pairs that contain user attributes and attribute values to be set for the user to be created. You can create a user without specifying any attributes other than Username. However, any attributes that you specify as required (when creating a user pool or in the Attributes tab of the console) either you should supply (in your call to AdminCreateUser) or the user should supply (when they sign up in response to your welcome message).

For custom attributes, you must prepend the custom: prefix to the attribute name.

To send a message inviting the user to sign up, you must specify the user's email address or phone number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.

In your call to AdminCreateUser, you can set the email_verified attribute to True, and you can set the phone_number_verified attribute to True. You can also do this by calling AdminUpdateUserAttributes.

• email: The email address of the user to whom the message that contains the code and username will be sent. Required if the email_verified attribute is set to True, or if "EMAIL" is specified in the DesiredDeliveryMediums parameter.

• phone_number: The phone number of the user to whom the message that contains the code and username will be sent. Required if the phone_number_verified attribute is set to True, or if "SMS" is specified in the DesiredDeliveryMediums parameter.

pub fn get_user_attributes(&self) -> &Option<Vec<AttributeType>>

An array of name-value pairs that contain user attributes and attribute values to be set for the user to be created. You can create a user without specifying any attributes other than Username. However, any attributes that you specify as required (when creating a user pool or in the Attributes tab of the console) either you should supply (in your call to AdminCreateUser) or the user should supply (when they sign up in response to your welcome message).

For custom attributes, you must prepend the custom: prefix to the attribute name.

To send a message inviting the user to sign up, you must specify the user's email address or phone number. You can do this in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.

In your call to AdminCreateUser, you can set the email_verified attribute to True, and you can set the phone_number_verified attribute to True. You can also do this by calling AdminUpdateUserAttributes.

• email: The email address of the user to whom the message that contains the code and username will be sent. Required if the email_verified attribute is set to True, or if "EMAIL" is specified in the DesiredDeliveryMediums parameter.

• phone_number: The phone number of the user to whom the message that contains the code and username will be sent. Required if the phone_number_verified attribute is set to True, or if "SMS" is specified in the DesiredDeliveryMediums parameter.

pub fn validation_data(self, input: AttributeType) -> Self

Appends an item to validation_data.

To override the contents of this collection use set_validation_data.

Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of key-value pairs are for custom validation of information that you collect from your users but don't need to retain.

Your Lambda function can analyze this additional data and act on it. Your function might perform external API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they sign up from within your network.

For more information about the pre sign-up Lambda trigger, see Pre sign-up Lambda trigger.

pub fn set_validation_data(self, input: Option<Vec<AttributeType>>) -> Self

Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of key-value pairs are for custom validation of information that you collect from your users but don't need to retain.

Your Lambda function can analyze this additional data and act on it. Your function might perform external API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they sign up from within your network.

For more information about the pre sign-up Lambda trigger, see Pre sign-up Lambda trigger.

pub fn get_validation_data(&self) -> &Option<Vec<AttributeType>>

Temporary user attributes that contribute to the outcomes of your pre sign-up Lambda trigger. This set of key-value pairs are for custom validation of information that you collect from your users but don't need to retain.

Your Lambda function can analyze this additional data and act on it. Your function might perform external API operations like logging user attributes and validation data to Amazon CloudWatch Logs. Validation data might also affect the response that your function returns to Amazon Cognito, like automatically confirming the user if they sign up from within your network.

For more information about the pre sign-up Lambda trigger, see Pre sign-up Lambda trigger.

pub fn temporary_password(self, input: impl Into<String>) -> Self

The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.

The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.

This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.

The temporary password can only be used until the user account expiration limit that you set for your user pool. To reset the account after that time limit, you must call AdminCreateUser again and specify RESEND for the MessageAction parameter.

pub fn set_temporary_password(self, input: Option<String>) -> Self

The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.

The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.

This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.

The temporary password can only be used until the user account expiration limit that you set for your user pool. To reset the account after that time limit, you must call AdminCreateUser again and specify RESEND for the MessageAction parameter.

pub fn get_temporary_password(&self) -> &Option<String>

The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.

The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page, along with a new password to be used in all future sign-ins.

This parameter isn't required. If you don't specify a value, Amazon Cognito generates one for you.

The temporary password can only be used until the user account expiration limit that you set for your user pool. To reset the account after that time limit, you must call AdminCreateUser again and specify RESEND for the MessageAction parameter.

pub fn force_alias_creation(self, input: bool) -> Self

This parameter is used only if the phone_number_verified or email_verified attribute is set to True. Otherwise, it is ignored.

If this parameter is set to True and the phone number or email address specified in the UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias from the previous user to the newly created user. The previous user will no longer be able to log in using that alias.

If this parameter is set to False, the API throws an AliasExistsException error if the alias already exists. The default value is False.

pub fn set_force_alias_creation(self, input: Option<bool>) -> Self

This parameter is used only if the phone_number_verified or email_verified attribute is set to True. Otherwise, it is ignored.

If this parameter is set to True and the phone number or email address specified in the UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias from the previous user to the newly created user. The previous user will no longer be able to log in using that alias.

If this parameter is set to False, the API throws an AliasExistsException error if the alias already exists. The default value is False.

pub fn get_force_alias_creation(&self) -> &Option<bool>

This parameter is used only if the phone_number_verified or email_verified attribute is set to True. Otherwise, it is ignored.

If this parameter is set to True and the phone number or email address specified in the UserAttributes parameter already exists as an alias with a different user, the API call will migrate the alias from the previous user to the newly created user. The previous user will no longer be able to log in using that alias.

If this parameter is set to False, the API throws an AliasExistsException error if the alias already exists. The default value is False.

pub fn message_action(self, input: MessageActionType) -> Self

Set to RESEND to resend the invitation message to a user that already exists and reset the expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can specify only one value.

pub fn set_message_action(self, input: Option<MessageActionType>) -> Self

Set to RESEND to resend the invitation message to a user that already exists and reset the expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can specify only one value.

pub fn get_message_action(&self) -> &Option<MessageActionType>

Set to RESEND to resend the invitation message to a user that already exists and reset the expiration limit on the user's account. Set to SUPPRESS to suppress sending the message. You can specify only one value.

pub fn desired_delivery_mediums(self, input: DeliveryMediumType) -> Self

Appends an item to desired_delivery_mediums.

To override the contents of this collection use set_desired_delivery_mediums.

Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the phone number will be used. The default value is "SMS". You can specify more than one value.

pub fn set_desired_delivery_mediums( self, input: Option<Vec<DeliveryMediumType>> ) -> Self

Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the phone number will be used. The default value is "SMS". You can specify more than one value.

pub fn get_desired_delivery_mediums(&self) -> &Option<Vec<DeliveryMediumType>>

Specify "EMAIL" if email will be used to send the welcome message. Specify "SMS" if the phone number will be used. The default value is "SMS". You can specify more than one value.

pub fn client_metadata(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to client_metadata.

To override the contents of this collection use set_client_metadata.

A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.

You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda, you can process the clientMetadata value to enhance your workflow for your specific needs.

For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.

When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:

• Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata parameter serves no purpose.

• Validate the ClientMetadata value.

• Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.

pub fn set_client_metadata(self, input: Option<HashMap<String, String>>) -> Self

A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.

You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda, you can process the clientMetadata value to enhance your workflow for your specific needs.

For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.

When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:

• Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata parameter serves no purpose.

• Validate the ClientMetadata value.

• Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.

pub fn get_client_metadata(&self) -> &Option<HashMap<String, String>>

A map of custom key-value pairs that you can provide as input for any custom workflows that this action triggers.

You create custom workflows by assigning Lambda functions to user pool triggers. When you use the AdminCreateUser API action, Amazon Cognito invokes the function that is assigned to the pre sign-up trigger. When Amazon Cognito invokes this function, it passes a JSON payload, which the function receives as input. This payload contains a clientMetadata attribute, which provides the data that you assigned to the ClientMetadata parameter in your AdminCreateUser request. In your function code in Lambda, you can process the clientMetadata value to enhance your workflow for your specific needs.

For more information, see Customizing user pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.

When you use the ClientMetadata parameter, remember that Amazon Cognito won't do the following:

• Store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration doesn't include triggers, the ClientMetadata parameter serves no purpose.

• Validate the ClientMetadata value.

• Encrypt the ClientMetadata value. Don't use Amazon Cognito to provide sensitive information.

pub fn build(self) -> Result<AdminCreateUserInput, BuildError>

Consumes the builder and constructs a AdminCreateUserInput.

impl AdminCreateUserInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<AdminCreateUserOutput, SdkError<AdminCreateUserError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for AdminCreateUserInputBuilder

fn clone(&self) -> AdminCreateUserInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AdminCreateUserInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for AdminCreateUserInputBuilder

fn default() -> AdminCreateUserInputBuilder

Returns the “default value” for a type.

impl PartialEq for AdminCreateUserInputBuilder

fn eq(&self, other: &AdminCreateUserInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for AdminCreateUserInputBuilder