pub struct UpdateUserPoolDomainFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateUserPoolDomain.
A user pool domain hosts managed login, an authorization server and web server for authentication in your application. This operation updates the branding version for user pool domains between 1 for hosted UI (classic) and 2 for managed login. It also updates the SSL certificate for user pool custom domains.
Changes to the domain branding version take up to one minute to take effect for a prefix domain and up to five minutes for a custom domain.
This operation doesn't change the name of your user pool domain. To change your domain, delete it with DeleteUserPoolDomain and create a new domain with CreateUserPoolDomain.
You can pass the ARN of a new Certificate Manager certificate in this request. Typically, ACM certificates automatically renew and you user pool can continue to use the same ARN. But if you generate a new certificate for your custom domain name, replace the original configuration with the new ARN in this request.
ACM certificates for custom domains must be in the US East (N. Virginia) Amazon Web Services Region. After you submit your request, Amazon Cognito requires up to 1 hour to distribute your new certificate to your custom domain.
For more information about adding a custom domain to your user pool, see Configuring a user pool domain.
Amazon Cognito evaluates Identity and Access Management (IAM) policies in requests for this API operation. For this operation, you must use IAM credentials to authorize requests, and you must grant yourself the corresponding IAM permission in a policy.
Learn more
Implementations§
Source§impl UpdateUserPoolDomainFluentBuilder
impl UpdateUserPoolDomainFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateUserPoolDomainInputBuilder
pub fn as_input(&self) -> &UpdateUserPoolDomainInputBuilder
Access the UpdateUserPoolDomain as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateUserPoolDomainOutput, SdkError<UpdateUserPoolDomainError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateUserPoolDomainOutput, SdkError<UpdateUserPoolDomainError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateUserPoolDomainOutput, UpdateUserPoolDomainError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateUserPoolDomainOutput, UpdateUserPoolDomainError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn domain(self, input: impl Into<String>) -> Self
pub fn domain(self, input: impl Into<String>) -> Self
The name of the domain that you want to update. For custom domains, this is the fully-qualified domain name, for example auth.example.com. For prefix domains, this is the prefix alone, such as myprefix.
Sourcepub fn set_domain(self, input: Option<String>) -> Self
pub fn set_domain(self, input: Option<String>) -> Self
The name of the domain that you want to update. For custom domains, this is the fully-qualified domain name, for example auth.example.com. For prefix domains, this is the prefix alone, such as myprefix.
Sourcepub fn get_domain(&self) -> &Option<String>
pub fn get_domain(&self) -> &Option<String>
The name of the domain that you want to update. For custom domains, this is the fully-qualified domain name, for example auth.example.com. For prefix domains, this is the prefix alone, such as myprefix.
Sourcepub fn user_pool_id(self, input: impl Into<String>) -> Self
pub fn user_pool_id(self, input: impl Into<String>) -> Self
The ID of the user pool that is associated with the domain you're updating.
Sourcepub fn set_user_pool_id(self, input: Option<String>) -> Self
pub fn set_user_pool_id(self, input: Option<String>) -> Self
The ID of the user pool that is associated with the domain you're updating.
Sourcepub fn get_user_pool_id(&self) -> &Option<String>
pub fn get_user_pool_id(&self) -> &Option<String>
The ID of the user pool that is associated with the domain you're updating.
Sourcepub fn managed_login_version(self, input: i32) -> Self
pub fn managed_login_version(self, input: i32) -> Self
A version number that indicates the state of managed login for your domain. Version 1 is hosted UI (classic). Version 2 is the newer managed login with the branding editor. For more information, see Managed login.
Sourcepub fn set_managed_login_version(self, input: Option<i32>) -> Self
pub fn set_managed_login_version(self, input: Option<i32>) -> Self
A version number that indicates the state of managed login for your domain. Version 1 is hosted UI (classic). Version 2 is the newer managed login with the branding editor. For more information, see Managed login.
Sourcepub fn get_managed_login_version(&self) -> &Option<i32>
pub fn get_managed_login_version(&self) -> &Option<i32>
A version number that indicates the state of managed login for your domain. Version 1 is hosted UI (classic). Version 2 is the newer managed login with the branding editor. For more information, see Managed login.
Sourcepub fn custom_domain_config(self, input: CustomDomainConfigType) -> Self
pub fn custom_domain_config(self, input: CustomDomainConfigType) -> Self
The configuration for a custom domain that hosts managed login for your application. In an UpdateUserPoolDomain request, this parameter specifies an SSL certificate for the managed login hosted webserver. The certificate must be an ACM ARN in us-east-1.
When you create a custom domain, the passkey RP ID defaults to the custom domain. If you had a prefix domain active, this will cause passkey integration for your prefix domain to stop working due to a mismatch in RP ID. To keep the prefix domain passkey integration working, you can explicitly set RP ID to the prefix domain.
Sourcepub fn set_custom_domain_config(
self,
input: Option<CustomDomainConfigType>,
) -> Self
pub fn set_custom_domain_config( self, input: Option<CustomDomainConfigType>, ) -> Self
The configuration for a custom domain that hosts managed login for your application. In an UpdateUserPoolDomain request, this parameter specifies an SSL certificate for the managed login hosted webserver. The certificate must be an ACM ARN in us-east-1.
When you create a custom domain, the passkey RP ID defaults to the custom domain. If you had a prefix domain active, this will cause passkey integration for your prefix domain to stop working due to a mismatch in RP ID. To keep the prefix domain passkey integration working, you can explicitly set RP ID to the prefix domain.
Sourcepub fn get_custom_domain_config(&self) -> &Option<CustomDomainConfigType>
pub fn get_custom_domain_config(&self) -> &Option<CustomDomainConfigType>
The configuration for a custom domain that hosts managed login for your application. In an UpdateUserPoolDomain request, this parameter specifies an SSL certificate for the managed login hosted webserver. The certificate must be an ACM ARN in us-east-1.
When you create a custom domain, the passkey RP ID defaults to the custom domain. If you had a prefix domain active, this will cause passkey integration for your prefix domain to stop working due to a mismatch in RP ID. To keep the prefix domain passkey integration working, you can explicitly set RP ID to the prefix domain.
Trait Implementations§
Source§impl Clone for UpdateUserPoolDomainFluentBuilder
impl Clone for UpdateUserPoolDomainFluentBuilder
Source§fn clone(&self) -> UpdateUserPoolDomainFluentBuilder
fn clone(&self) -> UpdateUserPoolDomainFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateUserPoolDomainFluentBuilder
impl !RefUnwindSafe for UpdateUserPoolDomainFluentBuilder
impl Send for UpdateUserPoolDomainFluentBuilder
impl Sync for UpdateUserPoolDomainFluentBuilder
impl Unpin for UpdateUserPoolDomainFluentBuilder
impl !UnwindSafe for UpdateUserPoolDomainFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);