#[non_exhaustive]
pub enum OverridePullRequestApprovalRulesError {
Show 16 variants EncryptionIntegrityChecksFailedException(EncryptionIntegrityChecksFailedException), EncryptionKeyAccessDeniedException(EncryptionKeyAccessDeniedException), EncryptionKeyDisabledException(EncryptionKeyDisabledException), EncryptionKeyNotFoundException(EncryptionKeyNotFoundException), EncryptionKeyUnavailableException(EncryptionKeyUnavailableException), InvalidOverrideStatusException(InvalidOverrideStatusException), InvalidPullRequestIdException(InvalidPullRequestIdException), InvalidRevisionIdException(InvalidRevisionIdException), OverrideAlreadySetException(OverrideAlreadySetException), OverrideStatusRequiredException(OverrideStatusRequiredException), PullRequestAlreadyClosedException(PullRequestAlreadyClosedException), PullRequestDoesNotExistException(PullRequestDoesNotExistException), PullRequestIdRequiredException(PullRequestIdRequiredException), RevisionIdRequiredException(RevisionIdRequiredException), RevisionNotCurrentException(RevisionNotCurrentException), Unhandled(Unhandled),
}
Expand description

Error type for the OverridePullRequestApprovalRulesError operation.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

EncryptionIntegrityChecksFailedException(EncryptionIntegrityChecksFailedException)

An encryption integrity check failed.

§

EncryptionKeyAccessDeniedException(EncryptionKeyAccessDeniedException)

An encryption key could not be accessed.

§

EncryptionKeyDisabledException(EncryptionKeyDisabledException)

The encryption key is disabled.

§

EncryptionKeyNotFoundException(EncryptionKeyNotFoundException)

No encryption key was found.

§

EncryptionKeyUnavailableException(EncryptionKeyUnavailableException)

The encryption key is not available.

§

InvalidOverrideStatusException(InvalidOverrideStatusException)

The override status is not valid. Valid statuses are OVERRIDE and REVOKE.

§

InvalidPullRequestIdException(InvalidPullRequestIdException)

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

§

InvalidRevisionIdException(InvalidRevisionIdException)

The revision ID is not valid. Use GetPullRequest to determine the value.

§

OverrideAlreadySetException(OverrideAlreadySetException)

The pull request has already had its approval rules set to override.

§

OverrideStatusRequiredException(OverrideStatusRequiredException)

An override status is required, but no value was provided. Valid values include OVERRIDE and REVOKE.

§

PullRequestAlreadyClosedException(PullRequestAlreadyClosedException)

The pull request status cannot be updated because it is already closed.

§

PullRequestDoesNotExistException(PullRequestDoesNotExistException)

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

§

PullRequestIdRequiredException(PullRequestIdRequiredException)

A pull request ID is required, but none was provided.

§

RevisionIdRequiredException(RevisionIdRequiredException)

A revision ID is required, but was not provided.

§

RevisionNotCurrentException(RevisionNotCurrentException)

The revision ID provided in the request does not match the current revision ID. Use GetPullRequest to retrieve the current revision ID.

§

Unhandled(Unhandled)

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

Implementations§

source§

impl OverridePullRequestApprovalRulesError

source

pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self

Creates the OverridePullRequestApprovalRulesError::Unhandled variant from any error type.

source

pub fn generic(err: ErrorMetadata) -> Self

Creates the OverridePullRequestApprovalRulesError::Unhandled variant from a ::aws_smithy_types::error::ErrorMetadata.

source

pub fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.

source

pub fn is_encryption_integrity_checks_failed_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::EncryptionIntegrityChecksFailedException.

source

pub fn is_encryption_key_access_denied_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::EncryptionKeyAccessDeniedException.

source

pub fn is_encryption_key_disabled_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::EncryptionKeyDisabledException.

source

pub fn is_encryption_key_not_found_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::EncryptionKeyNotFoundException.

source

pub fn is_encryption_key_unavailable_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::EncryptionKeyUnavailableException.

source

pub fn is_invalid_override_status_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::InvalidOverrideStatusException.

source

pub fn is_invalid_pull_request_id_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::InvalidPullRequestIdException.

source

pub fn is_invalid_revision_id_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::InvalidRevisionIdException.

source

pub fn is_override_already_set_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::OverrideAlreadySetException.

source

pub fn is_override_status_required_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::OverrideStatusRequiredException.

source

pub fn is_pull_request_already_closed_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::PullRequestAlreadyClosedException.

source

pub fn is_pull_request_does_not_exist_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::PullRequestDoesNotExistException.

source

pub fn is_pull_request_id_required_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::PullRequestIdRequiredException.

source

pub fn is_revision_id_required_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::RevisionIdRequiredException.

source

pub fn is_revision_not_current_exception(&self) -> bool

Returns true if the error kind is OverridePullRequestApprovalRulesError::RevisionNotCurrentException.

Trait Implementations§

source§

impl CreateUnhandledError for OverridePullRequestApprovalRulesError

source§

fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata> ) -> Self

Creates an unhandled error variant with the given source and error metadata.
source§

impl Debug for OverridePullRequestApprovalRulesError

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for OverridePullRequestApprovalRulesError

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Error for OverridePullRequestApprovalRulesError

source§

fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more
1.0.0 · source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
source§

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type based access to context intended for error reports. Read more
source§

impl From<OverridePullRequestApprovalRulesError> for Error

source§

fn from(err: OverridePullRequestApprovalRulesError) -> Self

Converts to this type from the input type.
source§

impl ProvideErrorKind for OverridePullRequestApprovalRulesError

source§

fn code(&self) -> Option<&str>

Returns the code for this error if one exists
source§

fn retryable_error_kind(&self) -> Option<ErrorKind>

Returns the ErrorKind when the error is modeled as retryable Read more
source§

impl ProvideErrorMetadata for OverridePullRequestApprovalRulesError

source§

fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
source§

fn code(&self) -> Option<&str>

Returns the error code if it’s available.
source§

fn message(&self) -> Option<&str>

Returns the error message, if there is one.
source§

impl RequestId for OverridePullRequestApprovalRulesError

source§

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<E> Provider for Ewhere E: Error + ?Sized,

source§

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

🔬This is a nightly-only experimental API. (provide_any)
Data providers should implement this method to provide all values they are able to provide by using demand. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more