Enum PutEventConfigurationError

Source
#[non_exhaustive]
pub enum PutEventConfigurationError {
Show 17 variants CloudTrailArnInvalidException(CloudTrailArnInvalidException), ConflictException(ConflictException), EventDataStoreArnInvalidException(EventDataStoreArnInvalidException), EventDataStoreNotFoundException(EventDataStoreNotFoundException), InactiveEventDataStoreException(InactiveEventDataStoreException), InsufficientDependencyServiceAccessPermissionException(InsufficientDependencyServiceAccessPermissionException), InsufficientIamAccessPermissionException(InsufficientIamAccessPermissionException), InvalidEventDataStoreCategoryException(InvalidEventDataStoreCategoryException), InvalidEventDataStoreStatusException(InvalidEventDataStoreStatusException), InvalidParameterCombinationException(InvalidParameterCombinationException), InvalidParameterException(InvalidParameterException), NoManagementAccountSlrExistsException(NoManagementAccountSlrExistsException), NotOrganizationMasterAccountException(NotOrganizationMasterAccountException), OperationNotPermittedException(OperationNotPermittedException), ThrottlingException(ThrottlingException), UnsupportedOperationException(UnsupportedOperationException), Unhandled(Unhandled),
}
Expand description

Error type for the PutEventConfigurationError operation.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

CloudTrailArnInvalidException(CloudTrailArnInvalidException)

This exception is thrown when an operation is called with an ARN that is not valid.

The following is the format of a trail ARN: arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail

The following is the format of an event data store ARN: arn:aws:cloudtrail:us-east-2:123456789012:eventdatastore/EXAMPLE-f852-4e8f-8bd1-bcf6cEXAMPLE

The following is the format of a dashboard ARN: arn:aws:cloudtrail:us-east-1:123456789012:dashboard/exampleDash

The following is the format of a channel ARN: arn:aws:cloudtrail:us-east-2:123456789012:channel/01234567890

§

ConflictException(ConflictException)

This exception is thrown when the specified resource is not ready for an operation. This can occur when you try to run an operation on a resource before CloudTrail has time to fully load the resource, or because another operation is modifying the resource. If this exception occurs, wait a few minutes, and then try the operation again.

§

EventDataStoreArnInvalidException(EventDataStoreArnInvalidException)

The specified event data store ARN is not valid or does not map to an event data store in your account.

§

EventDataStoreNotFoundException(EventDataStoreNotFoundException)

The specified event data store was not found.

§

InactiveEventDataStoreException(InactiveEventDataStoreException)

The event data store is inactive.

§

InsufficientDependencyServiceAccessPermissionException(InsufficientDependencyServiceAccessPermissionException)

This exception is thrown when the IAM identity that is used to create the organization resource lacks one or more required permissions for creating an organization resource in a required service.

§

InsufficientIamAccessPermissionException(InsufficientIamAccessPermissionException)

The task can't be completed because you are signed in with an account that lacks permissions to view or create a service-linked role. Sign in with an account that has the required permissions and then try again.

§

InvalidEventDataStoreCategoryException(InvalidEventDataStoreCategoryException)

This exception is thrown when event categories of specified event data stores are not valid.

§

InvalidEventDataStoreStatusException(InvalidEventDataStoreStatusException)

The event data store is not in a status that supports the operation.

§

InvalidParameterCombinationException(InvalidParameterCombinationException)

This exception is thrown when the combination of parameters provided is not valid.

§

InvalidParameterException(InvalidParameterException)

The request includes a parameter that is not valid.

§

NoManagementAccountSlrExistsException(NoManagementAccountSlrExistsException)

This exception is thrown when the management account does not have a service-linked role.

§

NotOrganizationMasterAccountException(NotOrganizationMasterAccountException)

This exception is thrown when the Amazon Web Services account making the request to create or update an organization trail or event data store is not the management account for an organization in Organizations. For more information, see Prepare For Creating a Trail For Your Organization or Organization event data stores.

§

OperationNotPermittedException(OperationNotPermittedException)

This exception is thrown when the requested operation is not permitted.

§

ThrottlingException(ThrottlingException)

This exception is thrown when the request rate exceeds the limit.

§

UnsupportedOperationException(UnsupportedOperationException)

This exception is thrown when the requested operation is not supported.

§

Unhandled(Unhandled)

👎Deprecated: Matching Unhandled directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code():    err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ } See ProvideErrorMetadata for what information is available for the error.

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

Implementations§

Source§

impl PutEventConfigurationError

Source

pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self

Creates the PutEventConfigurationError::Unhandled variant from any error type.

Source

pub fn generic(err: ErrorMetadata) -> Self

Creates the PutEventConfigurationError::Unhandled variant from an ErrorMetadata.

Source

pub fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.

Source

pub fn is_cloud_trail_arn_invalid_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::CloudTrailArnInvalidException.

Source

pub fn is_conflict_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::ConflictException.

Source

pub fn is_event_data_store_arn_invalid_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::EventDataStoreArnInvalidException.

Source

pub fn is_event_data_store_not_found_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::EventDataStoreNotFoundException.

Source

pub fn is_inactive_event_data_store_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InactiveEventDataStoreException.

Source

pub fn is_insufficient_dependency_service_access_permission_exception( &self, ) -> bool

Returns true if the error kind is PutEventConfigurationError::InsufficientDependencyServiceAccessPermissionException.

Source

pub fn is_insufficient_iam_access_permission_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InsufficientIamAccessPermissionException.

Source

pub fn is_invalid_event_data_store_category_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InvalidEventDataStoreCategoryException.

Source

pub fn is_invalid_event_data_store_status_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InvalidEventDataStoreStatusException.

Source

pub fn is_invalid_parameter_combination_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InvalidParameterCombinationException.

Source

pub fn is_invalid_parameter_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::InvalidParameterException.

Source

pub fn is_no_management_account_slr_exists_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::NoManagementAccountSlrExistsException.

Source

pub fn is_not_organization_master_account_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::NotOrganizationMasterAccountException.

Source

pub fn is_operation_not_permitted_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::OperationNotPermittedException.

Source

pub fn is_throttling_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::ThrottlingException.

Source

pub fn is_unsupported_operation_exception(&self) -> bool

Returns true if the error kind is PutEventConfigurationError::UnsupportedOperationException.

Trait Implementations§

Source§

impl CreateUnhandledError for PutEventConfigurationError

Source§

fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self

Creates an unhandled error variant with the given source and error metadata.
Source§

impl Debug for PutEventConfigurationError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Display for PutEventConfigurationError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Error for PutEventConfigurationError

Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
Source§

impl From<PutEventConfigurationError> for Error

Source§

fn from(err: PutEventConfigurationError) -> Self

Converts to this type from the input type.
Source§

impl ProvideErrorKind for PutEventConfigurationError

Source§

fn code(&self) -> Option<&str>

Returns the code for this error if one exists
Source§

fn retryable_error_kind(&self) -> Option<ErrorKind>

Returns the ErrorKind when the error is modeled as retryable Read more
Source§

impl ProvideErrorMetadata for PutEventConfigurationError

Source§

fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Source§

fn code(&self) -> Option<&str>

Returns the error code if it’s available.
Source§

fn message(&self) -> Option<&str>

Returns the error message, if there is one.
Source§

impl RequestId for PutEventConfigurationError

Source§

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,