#[non_exhaustive]pub struct ListQueriesInput {
pub event_data_store: Option<String>,
pub next_token: Option<String>,
pub max_results: Option<i32>,
pub start_time: Option<DateTime>,
pub end_time: Option<DateTime>,
pub query_status: Option<QueryStatus>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.event_data_store: Option<String>
The ARN (or the ID suffix of the ARN) of an event data store on which queries were run.
next_token: Option<String>
A token you can use to get the next page of results.
max_results: Option<i32>
The maximum number of queries to show on a page.
start_time: Option<DateTime>
Use with EndTime
to bound a ListQueries
request, and limit its results to only those queries run within a specified time period.
end_time: Option<DateTime>
Use with StartTime
to bound a ListQueries
request, and limit its results to only those queries run within a specified time period.
query_status: Option<QueryStatus>
The status of queries that you want to return in results. Valid values for QueryStatus
include QUEUED
, RUNNING
, FINISHED
, FAILED
, TIMED_OUT
, or CANCELLED
.
Implementations§
Source§impl ListQueriesInput
impl ListQueriesInput
Sourcepub fn event_data_store(&self) -> Option<&str>
pub fn event_data_store(&self) -> Option<&str>
The ARN (or the ID suffix of the ARN) of an event data store on which queries were run.
Sourcepub fn next_token(&self) -> Option<&str>
pub fn next_token(&self) -> Option<&str>
A token you can use to get the next page of results.
Sourcepub fn max_results(&self) -> Option<i32>
pub fn max_results(&self) -> Option<i32>
The maximum number of queries to show on a page.
Sourcepub fn start_time(&self) -> Option<&DateTime>
pub fn start_time(&self) -> Option<&DateTime>
Use with EndTime
to bound a ListQueries
request, and limit its results to only those queries run within a specified time period.
Sourcepub fn end_time(&self) -> Option<&DateTime>
pub fn end_time(&self) -> Option<&DateTime>
Use with StartTime
to bound a ListQueries
request, and limit its results to only those queries run within a specified time period.
Sourcepub fn query_status(&self) -> Option<&QueryStatus>
pub fn query_status(&self) -> Option<&QueryStatus>
The status of queries that you want to return in results. Valid values for QueryStatus
include QUEUED
, RUNNING
, FINISHED
, FAILED
, TIMED_OUT
, or CANCELLED
.
Source§impl ListQueriesInput
impl ListQueriesInput
Sourcepub fn builder() -> ListQueriesInputBuilder
pub fn builder() -> ListQueriesInputBuilder
Creates a new builder-style object to manufacture ListQueriesInput
.
Trait Implementations§
Source§impl Clone for ListQueriesInput
impl Clone for ListQueriesInput
Source§fn clone(&self) -> ListQueriesInput
fn clone(&self) -> ListQueriesInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ListQueriesInput
impl Debug for ListQueriesInput
Source§impl PartialEq for ListQueriesInput
impl PartialEq for ListQueriesInput
impl StructuralPartialEq for ListQueriesInput
Auto Trait Implementations§
impl Freeze for ListQueriesInput
impl RefUnwindSafe for ListQueriesInput
impl Send for ListQueriesInput
impl Sync for ListQueriesInput
impl Unpin for ListQueriesInput
impl UnwindSafe for ListQueriesInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);