#[non_exhaustive]pub struct CreateClusterInput {
pub backup_retention_policy: Option<BackupRetentionPolicy>,
pub hsm_type: Option<String>,
pub source_backup_id: Option<String>,
pub subnet_ids: Option<Vec<String>>,
pub network_type: Option<NetworkType>,
pub tag_list: Option<Vec<Tag>>,
pub mode: Option<ClusterMode>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.backup_retention_policy: Option<BackupRetentionPolicy>
A policy that defines how the service retains backups.
hsm_type: Option<String>
The type of HSM to use in the cluster. The allowed values are hsm1.medium
and hsm2m.medium
.
source_backup_id: Option<String>
The identifier (ID) or the Amazon Resource Name (ARN) of the cluster backup to restore. Use this value to restore the cluster from a backup instead of creating a new cluster. To find the backup ID or ARN, use DescribeBackups
. If using a backup in another account, the full ARN must be supplied.
subnet_ids: Option<Vec<String>>
The identifiers (IDs) of the subnets where you are creating the cluster. You must specify at least one subnet. If you specify multiple subnets, they must meet the following criteria:
-
All subnets must be in the same virtual private cloud (VPC).
-
You can specify only one subnet per Availability Zone.
network_type: Option<NetworkType>
The NetworkType to create a cluster with. The allowed values are IPV4
and DUALSTACK
.
tag_list: Option<Vec<Tag>>
Tags to apply to the CloudHSM cluster during creation.
mode: Option<ClusterMode>
The mode to use in the cluster. The allowed values are FIPS
and NON_FIPS
.
Implementations§
Source§impl CreateClusterInput
impl CreateClusterInput
Sourcepub fn backup_retention_policy(&self) -> Option<&BackupRetentionPolicy>
pub fn backup_retention_policy(&self) -> Option<&BackupRetentionPolicy>
A policy that defines how the service retains backups.
Sourcepub fn hsm_type(&self) -> Option<&str>
pub fn hsm_type(&self) -> Option<&str>
The type of HSM to use in the cluster. The allowed values are hsm1.medium
and hsm2m.medium
.
Sourcepub fn source_backup_id(&self) -> Option<&str>
pub fn source_backup_id(&self) -> Option<&str>
The identifier (ID) or the Amazon Resource Name (ARN) of the cluster backup to restore. Use this value to restore the cluster from a backup instead of creating a new cluster. To find the backup ID or ARN, use DescribeBackups
. If using a backup in another account, the full ARN must be supplied.
Sourcepub fn subnet_ids(&self) -> &[String]
pub fn subnet_ids(&self) -> &[String]
The identifiers (IDs) of the subnets where you are creating the cluster. You must specify at least one subnet. If you specify multiple subnets, they must meet the following criteria:
-
All subnets must be in the same virtual private cloud (VPC).
-
You can specify only one subnet per Availability Zone.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .subnet_ids.is_none()
.
Sourcepub fn network_type(&self) -> Option<&NetworkType>
pub fn network_type(&self) -> Option<&NetworkType>
The NetworkType to create a cluster with. The allowed values are IPV4
and DUALSTACK
.
Sourcepub fn tag_list(&self) -> &[Tag]
pub fn tag_list(&self) -> &[Tag]
Tags to apply to the CloudHSM cluster during creation.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tag_list.is_none()
.
Sourcepub fn mode(&self) -> Option<&ClusterMode>
pub fn mode(&self) -> Option<&ClusterMode>
The mode to use in the cluster. The allowed values are FIPS
and NON_FIPS
.
Source§impl CreateClusterInput
impl CreateClusterInput
Sourcepub fn builder() -> CreateClusterInputBuilder
pub fn builder() -> CreateClusterInputBuilder
Creates a new builder-style object to manufacture CreateClusterInput
.
Trait Implementations§
Source§impl Clone for CreateClusterInput
impl Clone for CreateClusterInput
Source§fn clone(&self) -> CreateClusterInput
fn clone(&self) -> CreateClusterInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for CreateClusterInput
impl Debug for CreateClusterInput
Source§impl PartialEq for CreateClusterInput
impl PartialEq for CreateClusterInput
impl StructuralPartialEq for CreateClusterInput
Auto Trait Implementations§
impl Freeze for CreateClusterInput
impl RefUnwindSafe for CreateClusterInput
impl Send for CreateClusterInput
impl Sync for CreateClusterInput
impl Unpin for CreateClusterInput
impl UnwindSafe for CreateClusterInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);