pub struct UpdateDistributionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateDistribution.
Updates the configuration for a CloudFront distribution.
The update process includes getting the current distribution configuration, updating it to make your changes, and then submitting an UpdateDistribution request to make the updates.
To update a web distribution using the CloudFront API
-
Use
GetDistributionConfigto get the current configuration, including the version identifier (ETag). -
Update the distribution configuration that was returned in the response. Note the following important requirements and restrictions:
-
You must copy the
ETagfield value from the response. (You'll use it for theIfMatchparameter in your request.) Then, remove theETagfield from the distribution configuration. -
You can't change the value of
CallerReference.
-
-
Submit an
UpdateDistributionrequest, providing the updated distribution configuration. The new configuration replaces the existing configuration. The values that you specify in anUpdateDistributionrequest are not merged into your existing configuration. Make sure to include all fields: the ones that you modified and also the ones that you didn't.
Implementations§
Source§impl UpdateDistributionFluentBuilder
impl UpdateDistributionFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateDistributionInputBuilder
pub fn as_input(&self) -> &UpdateDistributionInputBuilder
Access the UpdateDistribution as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateDistributionOutput, SdkError<UpdateDistributionError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateDistributionOutput, SdkError<UpdateDistributionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateDistributionOutput, UpdateDistributionError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateDistributionOutput, UpdateDistributionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn distribution_config(self, input: DistributionConfig) -> Self
pub fn distribution_config(self, input: DistributionConfig) -> Self
The distribution's configuration information.
Sourcepub fn set_distribution_config(self, input: Option<DistributionConfig>) -> Self
pub fn set_distribution_config(self, input: Option<DistributionConfig>) -> Self
The distribution's configuration information.
Sourcepub fn get_distribution_config(&self) -> &Option<DistributionConfig>
pub fn get_distribution_config(&self) -> &Option<DistributionConfig>
The distribution's configuration information.
Sourcepub fn if_match(self, input: impl Into<String>) -> Self
pub fn if_match(self, input: impl Into<String>) -> Self
The value of the ETag header that you received when retrieving the distribution's configuration. For example: E2QWRUHAPOMQZL.
Sourcepub fn set_if_match(self, input: Option<String>) -> Self
pub fn set_if_match(self, input: Option<String>) -> Self
The value of the ETag header that you received when retrieving the distribution's configuration. For example: E2QWRUHAPOMQZL.
Sourcepub fn get_if_match(&self) -> &Option<String>
pub fn get_if_match(&self) -> &Option<String>
The value of the ETag header that you received when retrieving the distribution's configuration. For example: E2QWRUHAPOMQZL.
Trait Implementations§
Source§impl Clone for UpdateDistributionFluentBuilder
impl Clone for UpdateDistributionFluentBuilder
Source§fn clone(&self) -> UpdateDistributionFluentBuilder
fn clone(&self) -> UpdateDistributionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateDistributionFluentBuilder
impl !RefUnwindSafe for UpdateDistributionFluentBuilder
impl Send for UpdateDistributionFluentBuilder
impl Sync for UpdateDistributionFluentBuilder
impl Unpin for UpdateDistributionFluentBuilder
impl !UnwindSafe for UpdateDistributionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);