Struct aws_sdk_cloudfront::input::list_invalidations_input::Builder

pub struct Builder { /* private fields */ }

A builder for ListInvalidationsInput.

Implementations

impl Builder

pub fn distribution_id(self, input: impl Into<String>) -> Self

The distribution's ID.

Examples found in repository

src/client.rs (line 7420)

        pub fn distribution_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.distribution_id(input.into());
            self
        }

pub fn set_distribution_id(self, input: Option<String>) -> Self

The distribution's ID.

Examples found in repository

src/client.rs (line 7428)

        pub fn set_distribution_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_distribution_id(input);
            self
        }

pub fn marker(self, input: impl Into<String>) -> Self

Use this parameter when paginating results to indicate where to begin in your list of invalidation batches. Because the results are returned in decreasing order from most recent to oldest, the most recent results are on the first page, the second page will contain earlier results, and so on. To get the next page of results, set Marker to the value of the NextMarker from the current page's response. This value is the same as the ID of the last invalidation batch on that page.

Examples found in repository

src/client.rs (line 7433)

        pub fn marker(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.marker(input.into());
            self
        }

pub fn set_marker(self, input: Option<String>) -> Self

Use this parameter when paginating results to indicate where to begin in your list of invalidation batches. Because the results are returned in decreasing order from most recent to oldest, the most recent results are on the first page, the second page will contain earlier results, and so on. To get the next page of results, set Marker to the value of the NextMarker from the current page's response. This value is the same as the ID of the last invalidation batch on that page.

Examples found in repository

src/client.rs (line 7438)

        pub fn set_marker(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_marker(input);
            self
        }

pub fn max_items(self, input: i32) -> Self

The maximum number of invalidation batches that you want in the response body.

Examples found in repository

src/client.rs (line 7443)

        pub fn max_items(mut self, input: i32) -> Self {
            self.inner = self.inner.max_items(input);
            self
        }

pub fn set_max_items(self, input: Option<i32>) -> Self

The maximum number of invalidation batches that you want in the response body.

Examples found in repository

src/client.rs (line 7448)

        pub fn set_max_items(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_items(input);
            self
        }

pub fn build(self) -> Result<ListInvalidationsInput, BuildError>

Consumes the builder and constructs a ListInvalidationsInput.

Examples found in repository

src/client.rs (line 7381)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::ListInvalidations,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListInvalidationsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListInvalidationsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListInvalidationsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

src/paginator.rs (line 306)

    pub fn send(
        self,
    ) -> impl tokio_stream::Stream<
        Item = std::result::Result<
            crate::output::ListInvalidationsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListInvalidationsError>,
        >,
    > + Unpin {
        // Move individual fields out of self for the borrow checker
        let builder = self.builder;
        let handle = self.handle;
        aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
            Box::pin(async move {
                // Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
                let mut input = match builder
                    .build()
                    .map_err(aws_smithy_http::result::SdkError::construction_failure)
                {
                    Ok(input) => input,
                    Err(e) => {
                        let _ = tx.send(Err(e)).await;
                        return;
                    }
                };
                loop {
                    let op = match input
                        .make_operation(&handle.conf)
                        .await
                        .map_err(aws_smithy_http::result::SdkError::construction_failure)
                    {
                        Ok(op) => op,
                        Err(e) => {
                            let _ = tx.send(Err(e)).await;
                            return;
                        }
                    };
                    let resp = handle.client.call(op).await;
                    // If the input member is None or it was an error
                    let done = match resp {
                        Ok(ref resp) => {
                            let new_token = crate::lens::reflens_structure_crate_output_list_invalidations_output_invalidation_list_next_marker(resp);
                            let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
                            if !is_empty
                                && new_token == input.marker.as_ref()
                                && self.stop_on_duplicate_token
                            {
                                true
                            } else {
                                input.marker = new_token.cloned();
                                is_empty
                            }
                        }
                        Err(_) => true,
                    };
                    if tx.send(resp).await.is_err() {
                        // receiving end was dropped
                        return;
                    }
                    if done {
                        return;
                    }
                }
            })
        })
    }

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for Builder