pub struct DetectStackSetDriftFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DetectStackSetDrift.
Detect drift on a stack set. When CloudFormation performs drift detection on a stack set, it performs drift detection on the stack associated with each stack instance in the stack set. For more information, see Performing drift detection on CloudFormation StackSets.
DetectStackSetDrift returns the OperationId of the stack set drift detection operation. Use this operation id with DescribeStackSetOperation to monitor the progress of the drift detection operation. The drift detection operation may take some time, depending on the number of stack instances included in the stack set, in addition to the number of resources included in each stack.
Once the operation has completed, use the following actions to return drift information:
-
Use
DescribeStackSetto return detailed information about the stack set, including detailed information about the last completed drift operation performed on the stack set. (Information about drift operations that are in progress isn't included.) -
Use
ListStackInstancesto return a list of stack instances belonging to the stack set, including the drift status and last drift time checked of each instance. -
Use
DescribeStackInstanceto return detailed information about a specific stack instance, including its drift status and last drift time checked.
You can only run a single drift detection operation on a given stack set at one time.
To stop a drift detection stack set operation, use StopStackSetOperation.
Implementations§
Source§impl DetectStackSetDriftFluentBuilder
impl DetectStackSetDriftFluentBuilder
Sourcepub fn as_input(&self) -> &DetectStackSetDriftInputBuilder
pub fn as_input(&self) -> &DetectStackSetDriftInputBuilder
Access the DetectStackSetDrift as a reference.
Sourcepub async fn send(
self,
) -> Result<DetectStackSetDriftOutput, SdkError<DetectStackSetDriftError, HttpResponse>>
pub async fn send( self, ) -> Result<DetectStackSetDriftOutput, SdkError<DetectStackSetDriftError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DetectStackSetDriftOutput, DetectStackSetDriftError, Self>
pub fn customize( self, ) -> CustomizableOperation<DetectStackSetDriftOutput, DetectStackSetDriftError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn stack_set_name(self, input: impl Into<String>) -> Self
pub fn stack_set_name(self, input: impl Into<String>) -> Self
The name of the stack set on which to perform the drift detection operation.
Sourcepub fn set_stack_set_name(self, input: Option<String>) -> Self
pub fn set_stack_set_name(self, input: Option<String>) -> Self
The name of the stack set on which to perform the drift detection operation.
Sourcepub fn get_stack_set_name(&self) -> &Option<String>
pub fn get_stack_set_name(&self) -> &Option<String>
The name of the stack set on which to perform the drift detection operation.
Sourcepub fn operation_preferences(self, input: StackSetOperationPreferences) -> Self
pub fn operation_preferences(self, input: StackSetOperationPreferences) -> Self
The user-specified preferences for how CloudFormation performs a stack set operation.
For more information about maximum concurrent accounts and failure tolerance, see Stack set operation options.
Sourcepub fn set_operation_preferences(
self,
input: Option<StackSetOperationPreferences>,
) -> Self
pub fn set_operation_preferences( self, input: Option<StackSetOperationPreferences>, ) -> Self
The user-specified preferences for how CloudFormation performs a stack set operation.
For more information about maximum concurrent accounts and failure tolerance, see Stack set operation options.
Sourcepub fn get_operation_preferences(&self) -> &Option<StackSetOperationPreferences>
pub fn get_operation_preferences(&self) -> &Option<StackSetOperationPreferences>
The user-specified preferences for how CloudFormation performs a stack set operation.
For more information about maximum concurrent accounts and failure tolerance, see Stack set operation options.
Sourcepub fn operation_id(self, input: impl Into<String>) -> Self
pub fn operation_id(self, input: impl Into<String>) -> Self
The ID of the stack set operation.
Sourcepub fn set_operation_id(self, input: Option<String>) -> Self
pub fn set_operation_id(self, input: Option<String>) -> Self
The ID of the stack set operation.
Sourcepub fn get_operation_id(&self) -> &Option<String>
pub fn get_operation_id(&self) -> &Option<String>
The ID of the stack set operation.
Sourcepub fn call_as(self, input: CallAs) -> Self
pub fn call_as(self, input: CallAs) -> Self
\[Service-managed permissions\] Specifies whether you are acting as an account administrator in the organization's management account or as a delegated administrator in a member account.
By default, SELF is specified. Use SELF for stack sets with self-managed permissions.
-
If you are signed in to the management account, specify
SELF. -
If you are signed in to a delegated administrator account, specify
DELEGATED_ADMIN.Your Amazon Web Services account must be registered as a delegated administrator in the management account. For more information, see Register a delegated administrator in the CloudFormation User Guide.
Sourcepub fn set_call_as(self, input: Option<CallAs>) -> Self
pub fn set_call_as(self, input: Option<CallAs>) -> Self
\[Service-managed permissions\] Specifies whether you are acting as an account administrator in the organization's management account or as a delegated administrator in a member account.
By default, SELF is specified. Use SELF for stack sets with self-managed permissions.
-
If you are signed in to the management account, specify
SELF. -
If you are signed in to a delegated administrator account, specify
DELEGATED_ADMIN.Your Amazon Web Services account must be registered as a delegated administrator in the management account. For more information, see Register a delegated administrator in the CloudFormation User Guide.
Sourcepub fn get_call_as(&self) -> &Option<CallAs>
pub fn get_call_as(&self) -> &Option<CallAs>
\[Service-managed permissions\] Specifies whether you are acting as an account administrator in the organization's management account or as a delegated administrator in a member account.
By default, SELF is specified. Use SELF for stack sets with self-managed permissions.
-
If you are signed in to the management account, specify
SELF. -
If you are signed in to a delegated administrator account, specify
DELEGATED_ADMIN.Your Amazon Web Services account must be registered as a delegated administrator in the management account. For more information, see Register a delegated administrator in the CloudFormation User Guide.
Trait Implementations§
Source§impl Clone for DetectStackSetDriftFluentBuilder
impl Clone for DetectStackSetDriftFluentBuilder
Source§fn clone(&self) -> DetectStackSetDriftFluentBuilder
fn clone(&self) -> DetectStackSetDriftFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DetectStackSetDriftFluentBuilder
impl !RefUnwindSafe for DetectStackSetDriftFluentBuilder
impl Send for DetectStackSetDriftFluentBuilder
impl Sync for DetectStackSetDriftFluentBuilder
impl Unpin for DetectStackSetDriftFluentBuilder
impl !UnwindSafe for DetectStackSetDriftFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);