#[non_exhaustive]pub struct KinesisVideoStreamSourceRuntimeConfiguration {
pub streams: Vec<StreamConfiguration>,
pub media_encoding: MediaEncoding,
pub media_sample_rate: i32,
}
Expand description
The runtime configuration settings for the Kinesis video stream source.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.streams: Vec<StreamConfiguration>
The streams in the source runtime configuration of a Kinesis video stream.
media_encoding: MediaEncoding
Specifies the encoding of your input audio. Supported format: PCM (only signed 16-bit little-endian audio formats, which does not include WAV)
For more information, see Media formats in the Amazon Transcribe Developer Guide.
media_sample_rate: i32
The sample rate of the input audio (in hertz). Low-quality audio, such as telephone audio, is typically around 8,000 Hz. High-quality audio typically ranges from 16,000 Hz to 48,000 Hz. Note that the sample rate you specify must match that of your audio.
Valid Range: Minimum value of 8000. Maximum value of 48000.
Implementations§
Source§impl KinesisVideoStreamSourceRuntimeConfiguration
impl KinesisVideoStreamSourceRuntimeConfiguration
Sourcepub fn streams(&self) -> &[StreamConfiguration]
pub fn streams(&self) -> &[StreamConfiguration]
The streams in the source runtime configuration of a Kinesis video stream.
Sourcepub fn media_encoding(&self) -> &MediaEncoding
pub fn media_encoding(&self) -> &MediaEncoding
Specifies the encoding of your input audio. Supported format: PCM (only signed 16-bit little-endian audio formats, which does not include WAV)
For more information, see Media formats in the Amazon Transcribe Developer Guide.
Sourcepub fn media_sample_rate(&self) -> i32
pub fn media_sample_rate(&self) -> i32
The sample rate of the input audio (in hertz). Low-quality audio, such as telephone audio, is typically around 8,000 Hz. High-quality audio typically ranges from 16,000 Hz to 48,000 Hz. Note that the sample rate you specify must match that of your audio.
Valid Range: Minimum value of 8000. Maximum value of 48000.
Source§impl KinesisVideoStreamSourceRuntimeConfiguration
impl KinesisVideoStreamSourceRuntimeConfiguration
Sourcepub fn builder() -> KinesisVideoStreamSourceRuntimeConfigurationBuilder
pub fn builder() -> KinesisVideoStreamSourceRuntimeConfigurationBuilder
Creates a new builder-style object to manufacture KinesisVideoStreamSourceRuntimeConfiguration
.
Trait Implementations§
Source§impl Clone for KinesisVideoStreamSourceRuntimeConfiguration
impl Clone for KinesisVideoStreamSourceRuntimeConfiguration
Source§fn clone(&self) -> KinesisVideoStreamSourceRuntimeConfiguration
fn clone(&self) -> KinesisVideoStreamSourceRuntimeConfiguration
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for KinesisVideoStreamSourceRuntimeConfiguration
impl PartialEq for KinesisVideoStreamSourceRuntimeConfiguration
Source§fn eq(&self, other: &KinesisVideoStreamSourceRuntimeConfiguration) -> bool
fn eq(&self, other: &KinesisVideoStreamSourceRuntimeConfiguration) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for KinesisVideoStreamSourceRuntimeConfiguration
Auto Trait Implementations§
impl Freeze for KinesisVideoStreamSourceRuntimeConfiguration
impl RefUnwindSafe for KinesisVideoStreamSourceRuntimeConfiguration
impl Send for KinesisVideoStreamSourceRuntimeConfiguration
impl Sync for KinesisVideoStreamSourceRuntimeConfiguration
impl Unpin for KinesisVideoStreamSourceRuntimeConfiguration
impl UnwindSafe for KinesisVideoStreamSourceRuntimeConfiguration
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);