#[non_exhaustive]pub struct ApplyGuardrailInput {
pub guardrail_identifier: Option<String>,
pub guardrail_version: Option<String>,
pub source: Option<GuardrailContentSource>,
pub content: Option<Vec<GuardrailContentBlock>>,
pub output_scope: Option<GuardrailOutputScope>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.guardrail_identifier: Option<String>
The guardrail identifier used in the request to apply the guardrail.
guardrail_version: Option<String>
The guardrail version used in the request to apply the guardrail.
source: Option<GuardrailContentSource>
The source of data used in the request to apply the guardrail.
content: Option<Vec<GuardrailContentBlock>>
The content details used in the request to apply the guardrail.
output_scope: Option<GuardrailOutputScope>
Specifies the scope of the output that you get in the response. Set to FULL
to return the entire output, including any detected and non-detected entries in the response for enhanced debugging.
Note that the full output scope doesn't apply to word filters or regex in sensitive information filters. It does apply to all other filtering policies, including sensitive information with filters that can detect personally identifiable information (PII).
Implementations§
Source§impl ApplyGuardrailInput
impl ApplyGuardrailInput
Sourcepub fn guardrail_identifier(&self) -> Option<&str>
pub fn guardrail_identifier(&self) -> Option<&str>
The guardrail identifier used in the request to apply the guardrail.
Sourcepub fn guardrail_version(&self) -> Option<&str>
pub fn guardrail_version(&self) -> Option<&str>
The guardrail version used in the request to apply the guardrail.
Sourcepub fn source(&self) -> Option<&GuardrailContentSource>
pub fn source(&self) -> Option<&GuardrailContentSource>
The source of data used in the request to apply the guardrail.
Sourcepub fn content(&self) -> &[GuardrailContentBlock]
pub fn content(&self) -> &[GuardrailContentBlock]
The content details used in the request to apply the guardrail.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .content.is_none()
.
Sourcepub fn output_scope(&self) -> Option<&GuardrailOutputScope>
pub fn output_scope(&self) -> Option<&GuardrailOutputScope>
Specifies the scope of the output that you get in the response. Set to FULL
to return the entire output, including any detected and non-detected entries in the response for enhanced debugging.
Note that the full output scope doesn't apply to word filters or regex in sensitive information filters. It does apply to all other filtering policies, including sensitive information with filters that can detect personally identifiable information (PII).
Source§impl ApplyGuardrailInput
impl ApplyGuardrailInput
Sourcepub fn builder() -> ApplyGuardrailInputBuilder
pub fn builder() -> ApplyGuardrailInputBuilder
Creates a new builder-style object to manufacture ApplyGuardrailInput
.
Trait Implementations§
Source§impl Clone for ApplyGuardrailInput
impl Clone for ApplyGuardrailInput
Source§fn clone(&self) -> ApplyGuardrailInput
fn clone(&self) -> ApplyGuardrailInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ApplyGuardrailInput
impl Debug for ApplyGuardrailInput
Source§impl PartialEq for ApplyGuardrailInput
impl PartialEq for ApplyGuardrailInput
impl StructuralPartialEq for ApplyGuardrailInput
Auto Trait Implementations§
impl Freeze for ApplyGuardrailInput
impl RefUnwindSafe for ApplyGuardrailInput
impl Send for ApplyGuardrailInput
impl Sync for ApplyGuardrailInput
impl Unpin for ApplyGuardrailInput
impl UnwindSafe for ApplyGuardrailInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);