Struct LinuxParameters

#[non_exhaustive]
pub struct LinuxParameters {
    pub devices: Option<Vec<Device>>,
    pub init_process_enabled: Option<bool>,
    pub shared_memory_size: Option<i32>,
    pub tmpfs: Option<Vec<Tmpfs>>,
    pub max_swap: Option<i32>,
    pub swappiness: Option<i32>,
}

Linux-specific modifications that are applied to the container, such as details for device mappings.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

devices: Option<Vec<Device>>

Any of the host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

init_process_enabled: Option<bool>

If true, run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run. This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version | grep "Server API version"

shared_memory_size: Option<i32>

The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

tmpfs: Option<Vec<Tmpfs>>

The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide this parameter for this resource type.

max_swap: Option<i32>

The total amount of swap memory (in MiB) a container can use. This parameter is translated to the --memory-swap option to docker run where the value is the sum of the container memory plus the maxSwap value. For more information, see --memory-swap details in the Docker documentation.

If a maxSwap value of 0 is specified, the container doesn't use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container doesn't use the swap configuration for the container instance on which it runs. A maxSwap value must be set for the swappiness parameter to be used.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

swappiness: Option<i32>

You can use this parameter to tune a container's memory swappiness behavior. A swappiness value of 0 causes swapping to not occur unless absolutely necessary. A swappiness value of 100 causes pages to be swapped aggressively. Valid values are whole numbers between 0 and 100. If the swappiness parameter isn't specified, a default value of 60 is used. If a value isn't specified for maxSwap, then this parameter is ignored. If maxSwap is set to 0, the container doesn't use swap. This parameter maps to the --memory-swappiness option to docker run.

Consider the following when you use a per-container swap configuration.

• Swap space must be enabled and allocated on the container instance for the containers to use.

  By default, the Amazon ECS optimized AMIs don't have swap enabled. You must enable swap on the instance to use this feature. For more information, see Instance store swap volumes in the Amazon EC2 User Guide for Linux Instances or How do I allocate memory to work as swap space in an Amazon EC2 instance by using a swap file?

• The swap space parameters are only supported for job definitions using EC2 resources.

• If the maxSwap and swappiness parameters are omitted from a job definition, each container has a default swappiness value of 60. Moreover, the total swap usage is limited to two times the memory reservation of the container.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

Implementations

impl LinuxParameters

pub fn devices(&self) -> &[Device]

Any of the host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .devices.is_none().

pub fn init_process_enabled(&self) -> Option<bool>

If true, run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run. This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version | grep "Server API version"

pub fn shared_memory_size(&self) -> Option<i32>

The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

pub fn tmpfs(&self) -> &[Tmpfs]

The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide this parameter for this resource type.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tmpfs.is_none().

pub fn max_swap(&self) -> Option<i32>

The total amount of swap memory (in MiB) a container can use. This parameter is translated to the --memory-swap option to docker run where the value is the sum of the container memory plus the maxSwap value. For more information, see --memory-swap details in the Docker documentation.

If a maxSwap value of 0 is specified, the container doesn't use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container doesn't use the swap configuration for the container instance on which it runs. A maxSwap value must be set for the swappiness parameter to be used.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

pub fn swappiness(&self) -> Option<i32>

You can use this parameter to tune a container's memory swappiness behavior. A swappiness value of 0 causes swapping to not occur unless absolutely necessary. A swappiness value of 100 causes pages to be swapped aggressively. Valid values are whole numbers between 0 and 100. If the swappiness parameter isn't specified, a default value of 60 is used. If a value isn't specified for maxSwap, then this parameter is ignored. If maxSwap is set to 0, the container doesn't use swap. This parameter maps to the --memory-swappiness option to docker run.

Consider the following when you use a per-container swap configuration.

• Swap space must be enabled and allocated on the container instance for the containers to use.

  By default, the Amazon ECS optimized AMIs don't have swap enabled. You must enable swap on the instance to use this feature. For more information, see Instance store swap volumes in the Amazon EC2 User Guide for Linux Instances or How do I allocate memory to work as swap space in an Amazon EC2 instance by using a swap file?

• The swap space parameters are only supported for job definitions using EC2 resources.

• If the maxSwap and swappiness parameters are omitted from a job definition, each container has a default swappiness value of 60. Moreover, the total swap usage is limited to two times the memory reservation of the container.

This parameter isn't applicable to jobs that are running on Fargate resources. Don't provide it for these jobs.

impl LinuxParameters

pub fn builder() -> LinuxParametersBuilder

Creates a new builder-style object to manufacture LinuxParameters.

Trait Implementations

impl Clone for LinuxParameters

fn clone(&self) -> LinuxParameters

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for LinuxParameters

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for LinuxParameters

fn eq(&self, other: &LinuxParameters) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for LinuxParameters