#[non_exhaustive]
pub struct CreateComputeEnvironmentInputBuilder { /* private fields */ }
Expand description

Implementations§

source§

impl CreateComputeEnvironmentInputBuilder

source

pub fn compute_environment_name(self, input: impl Into<String>) -> Self

The name for your compute environment. It can be up to 128 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), and underscores (_).

source

pub fn set_compute_environment_name(self, input: Option<String>) -> Self

The name for your compute environment. It can be up to 128 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), and underscores (_).

source

pub fn get_compute_environment_name(&self) -> &Option<String>

The name for your compute environment. It can be up to 128 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), and underscores (_).

source

pub fn type(self, input: CeType) -> Self

The type of the compute environment: MANAGED or UNMANAGED. For more information, see Compute Environments in the Batch User Guide.

source

pub fn set_type(self, input: Option<CeType>) -> Self

The type of the compute environment: MANAGED or UNMANAGED. For more information, see Compute Environments in the Batch User Guide.

source

pub fn get_type(&self) -> &Option<CeType>

The type of the compute environment: MANAGED or UNMANAGED. For more information, see Compute Environments in the Batch User Guide.

source

pub fn state(self, input: CeState) -> Self

The state of the compute environment. If the state is ENABLED, then the compute environment accepts jobs from a queue and can scale out automatically based on queues.

If the state is ENABLED, then the Batch scheduler can attempt to place jobs from an associated job queue on the compute resources within the environment. If the compute environment is managed, then it can scale its instances out or in automatically, based on the job queue demand.

If the state is DISABLED, then the Batch scheduler doesn't attempt to place jobs within the environment. Jobs in a STARTING or RUNNING state continue to progress normally. Managed compute environments in the DISABLED state don't scale out.

Compute environments in a DISABLED state may continue to incur billing charges. To prevent additional charges, turn off and then delete the compute environment. For more information, see State in the Batch User Guide.

When an instance is idle, the instance scales down to the minvCpus value. However, the instance size doesn't change. For example, consider a c5.8xlarge instance with a minvCpus value of 4 and a desiredvCpus value of 36. This instance doesn't scale down to a c5.large instance.

source

pub fn set_state(self, input: Option<CeState>) -> Self

The state of the compute environment. If the state is ENABLED, then the compute environment accepts jobs from a queue and can scale out automatically based on queues.

If the state is ENABLED, then the Batch scheduler can attempt to place jobs from an associated job queue on the compute resources within the environment. If the compute environment is managed, then it can scale its instances out or in automatically, based on the job queue demand.

If the state is DISABLED, then the Batch scheduler doesn't attempt to place jobs within the environment. Jobs in a STARTING or RUNNING state continue to progress normally. Managed compute environments in the DISABLED state don't scale out.

Compute environments in a DISABLED state may continue to incur billing charges. To prevent additional charges, turn off and then delete the compute environment. For more information, see State in the Batch User Guide.

When an instance is idle, the instance scales down to the minvCpus value. However, the instance size doesn't change. For example, consider a c5.8xlarge instance with a minvCpus value of 4 and a desiredvCpus value of 36. This instance doesn't scale down to a c5.large instance.

source

pub fn get_state(&self) -> &Option<CeState>

The state of the compute environment. If the state is ENABLED, then the compute environment accepts jobs from a queue and can scale out automatically based on queues.

If the state is ENABLED, then the Batch scheduler can attempt to place jobs from an associated job queue on the compute resources within the environment. If the compute environment is managed, then it can scale its instances out or in automatically, based on the job queue demand.

If the state is DISABLED, then the Batch scheduler doesn't attempt to place jobs within the environment. Jobs in a STARTING or RUNNING state continue to progress normally. Managed compute environments in the DISABLED state don't scale out.

Compute environments in a DISABLED state may continue to incur billing charges. To prevent additional charges, turn off and then delete the compute environment. For more information, see State in the Batch User Guide.

When an instance is idle, the instance scales down to the minvCpus value. However, the instance size doesn't change. For example, consider a c5.8xlarge instance with a minvCpus value of 4 and a desiredvCpus value of 36. This instance doesn't scale down to a c5.large instance.

source

pub fn unmanagedv_cpus(self, input: i32) -> Self

The maximum number of vCPUs for an unmanaged compute environment. This parameter is only used for fair share scheduling to reserve vCPU capacity for new share identifiers. If this parameter isn't provided for a fair share job queue, no vCPU capacity is reserved.

This parameter is only supported when the type parameter is set to UNMANAGED.

source

pub fn set_unmanagedv_cpus(self, input: Option<i32>) -> Self

The maximum number of vCPUs for an unmanaged compute environment. This parameter is only used for fair share scheduling to reserve vCPU capacity for new share identifiers. If this parameter isn't provided for a fair share job queue, no vCPU capacity is reserved.

This parameter is only supported when the type parameter is set to UNMANAGED.

source

pub fn get_unmanagedv_cpus(&self) -> &Option<i32>

The maximum number of vCPUs for an unmanaged compute environment. This parameter is only used for fair share scheduling to reserve vCPU capacity for new share identifiers. If this parameter isn't provided for a fair share job queue, no vCPU capacity is reserved.

This parameter is only supported when the type parameter is set to UNMANAGED.

source

pub fn compute_resources(self, input: ComputeResource) -> Self

Details about the compute resources managed by the compute environment. This parameter is required for managed compute environments. For more information, see Compute Environments in the Batch User Guide.

source

pub fn set_compute_resources(self, input: Option<ComputeResource>) -> Self

Details about the compute resources managed by the compute environment. This parameter is required for managed compute environments. For more information, see Compute Environments in the Batch User Guide.

source

pub fn get_compute_resources(&self) -> &Option<ComputeResource>

Details about the compute resources managed by the compute environment. This parameter is required for managed compute environments. For more information, see Compute Environments in the Batch User Guide.

source

pub fn service_role(self, input: impl Into<String>) -> Self

The full Amazon Resource Name (ARN) of the IAM role that allows Batch to make calls to other Amazon Web Services services on your behalf. For more information, see Batch service IAM role in the Batch User Guide.

If your account already created the Batch service-linked role, that role is used by default for your compute environment unless you specify a different role here. If the Batch service-linked role doesn't exist in your account, and no role is specified here, the service attempts to create the Batch service-linked role in your account.

If your specified role has a path other than /, then you must specify either the full role ARN (recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/, specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

Depending on how you created your Batch service role, its ARN might contain the service-role path prefix. When you only specify the name of the service role, Batch assumes that your ARN doesn't use the service-role path prefix. Because of this, we recommend that you specify the full ARN of your service role when you create compute environments.

source

pub fn set_service_role(self, input: Option<String>) -> Self

The full Amazon Resource Name (ARN) of the IAM role that allows Batch to make calls to other Amazon Web Services services on your behalf. For more information, see Batch service IAM role in the Batch User Guide.

If your account already created the Batch service-linked role, that role is used by default for your compute environment unless you specify a different role here. If the Batch service-linked role doesn't exist in your account, and no role is specified here, the service attempts to create the Batch service-linked role in your account.

If your specified role has a path other than /, then you must specify either the full role ARN (recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/, specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

Depending on how you created your Batch service role, its ARN might contain the service-role path prefix. When you only specify the name of the service role, Batch assumes that your ARN doesn't use the service-role path prefix. Because of this, we recommend that you specify the full ARN of your service role when you create compute environments.

source

pub fn get_service_role(&self) -> &Option<String>

The full Amazon Resource Name (ARN) of the IAM role that allows Batch to make calls to other Amazon Web Services services on your behalf. For more information, see Batch service IAM role in the Batch User Guide.

If your account already created the Batch service-linked role, that role is used by default for your compute environment unless you specify a different role here. If the Batch service-linked role doesn't exist in your account, and no role is specified here, the service attempts to create the Batch service-linked role in your account.

If your specified role has a path other than /, then you must specify either the full role ARN (recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/, specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

Depending on how you created your Batch service role, its ARN might contain the service-role path prefix. When you only specify the name of the service role, Batch assumes that your ARN doesn't use the service-role path prefix. Because of this, we recommend that you specify the full ARN of your service role when you create compute environments.

source

pub fn tags(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to tags.

To override the contents of this collection use set_tags.

The tags that you apply to the compute environment to help you categorize and organize your resources. Each tag consists of a key and an optional value. For more information, see Tagging Amazon Web Services Resources in Amazon Web Services General Reference.

These tags can be updated or removed using the TagResource and UntagResource API operations. These tags don't propagate to the underlying compute resources.

source

pub fn set_tags(self, input: Option<HashMap<String, String>>) -> Self

The tags that you apply to the compute environment to help you categorize and organize your resources. Each tag consists of a key and an optional value. For more information, see Tagging Amazon Web Services Resources in Amazon Web Services General Reference.

These tags can be updated or removed using the TagResource and UntagResource API operations. These tags don't propagate to the underlying compute resources.

source

pub fn get_tags(&self) -> &Option<HashMap<String, String>>

The tags that you apply to the compute environment to help you categorize and organize your resources. Each tag consists of a key and an optional value. For more information, see Tagging Amazon Web Services Resources in Amazon Web Services General Reference.

These tags can be updated or removed using the TagResource and UntagResource API operations. These tags don't propagate to the underlying compute resources.

source

pub fn eks_configuration(self, input: EksConfiguration) -> Self

The details for the Amazon EKS cluster that supports the compute environment.

source

pub fn set_eks_configuration(self, input: Option<EksConfiguration>) -> Self

The details for the Amazon EKS cluster that supports the compute environment.

source

pub fn get_eks_configuration(&self) -> &Option<EksConfiguration>

The details for the Amazon EKS cluster that supports the compute environment.

source

pub fn build(self) -> Result<CreateComputeEnvironmentInput, BuildError>

Consumes the builder and constructs a CreateComputeEnvironmentInput.

source§

impl CreateComputeEnvironmentInputBuilder

source

pub async fn send_with( self, client: &Client ) -> Result<CreateComputeEnvironmentOutput, SdkError<CreateComputeEnvironmentError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

source§

impl Clone for CreateComputeEnvironmentInputBuilder

source§

fn clone(&self) -> CreateComputeEnvironmentInputBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateComputeEnvironmentInputBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for CreateComputeEnvironmentInputBuilder

source§

fn default() -> CreateComputeEnvironmentInputBuilder

Returns the “default value” for a type. Read more
source§

impl PartialEq<CreateComputeEnvironmentInputBuilder> for CreateComputeEnvironmentInputBuilder

source§

fn eq(&self, other: &CreateComputeEnvironmentInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for CreateComputeEnvironmentInputBuilder

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more