Struct aws_sdk_backup::operation::start_restore_job::builders::StartRestoreJobFluentBuilder

source · 
pub struct StartRestoreJobFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to StartRestoreJob.

Recovers the saved resource identified by an Amazon Resource Name (ARN).

Implementations§

source§

impl StartRestoreJobFluentBuilder

source

pub fn as_input(&self) -> &StartRestoreJobInputBuilder

Access the StartRestoreJob as a reference.

source

pub async fn send( self ) -> Result<StartRestoreJobOutput, SdkError<StartRestoreJobError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<StartRestoreJobOutput, StartRestoreJobError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn recovery_point_arn(self, input: impl Into<String>) -> Self

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn set_recovery_point_arn(self, input: Option<String>) -> Self

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn get_recovery_point_arn(&self) -> &Option<String>

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn metadata(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to Metadata.

To override the contents of this collection use set_metadata.

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

  • file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.

  • Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.

  • KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.

  • PerformanceMode: Specifies the throughput mode of the file system.

  • CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.

  • newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.

  • ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn set_metadata(self, input: Option<HashMap<String, String>>) -> Self

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

  • file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.

  • Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.

  • KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.

  • PerformanceMode: Specifies the throughput mode of the file system.

  • CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.

  • newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.

  • ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn get_metadata(&self) -> &Option<HashMap<String, String>>

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

  • file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.

  • Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.

  • KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.

  • PerformanceMode: Specifies the throughput mode of the file system.

  • CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.

  • newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.

  • ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn iam_role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn set_iam_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn get_iam_role_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn idempotency_token(self, input: impl Into<String>) -> Self

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source

pub fn set_idempotency_token(self, input: Option<String>) -> Self

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source

pub fn get_idempotency_token(&self) -> &Option<String>

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source

pub fn resource_type(self, input: impl Into<String>) -> Self

Starts a job to restore a recovery point for one of the following resources:

  • Aurora for Amazon Aurora

  • DocumentDB for Amazon DocumentDB (with MongoDB compatibility)

  • CloudFormation for CloudFormation

  • DynamoDB for Amazon DynamoDB

  • EBS for Amazon Elastic Block Store

  • EC2 for Amazon Elastic Compute Cloud

  • EFS for Amazon Elastic File System

  • FSx for Amazon FSx

  • Neptune for Amazon Neptune

  • RDS for Amazon Relational Database Service

  • Redshift for Amazon Redshift

  • Storage Gateway for Storage Gateway

  • S3 for Amazon S3

  • Timestream for Amazon Timestream

  • VirtualMachine for virtual machines

source

pub fn set_resource_type(self, input: Option<String>) -> Self

Starts a job to restore a recovery point for one of the following resources:

  • Aurora for Amazon Aurora

  • DocumentDB for Amazon DocumentDB (with MongoDB compatibility)

  • CloudFormation for CloudFormation

  • DynamoDB for Amazon DynamoDB

  • EBS for Amazon Elastic Block Store

  • EC2 for Amazon Elastic Compute Cloud

  • EFS for Amazon Elastic File System

  • FSx for Amazon FSx

  • Neptune for Amazon Neptune

  • RDS for Amazon Relational Database Service

  • Redshift for Amazon Redshift

  • Storage Gateway for Storage Gateway

  • S3 for Amazon S3

  • Timestream for Amazon Timestream

  • VirtualMachine for virtual machines

source

pub fn get_resource_type(&self) -> &Option<String>

Starts a job to restore a recovery point for one of the following resources:

  • Aurora for Amazon Aurora

  • DocumentDB for Amazon DocumentDB (with MongoDB compatibility)

  • CloudFormation for CloudFormation

  • DynamoDB for Amazon DynamoDB

  • EBS for Amazon Elastic Block Store

  • EC2 for Amazon Elastic Compute Cloud

  • EFS for Amazon Elastic File System

  • FSx for Amazon FSx

  • Neptune for Amazon Neptune

  • RDS for Amazon Relational Database Service

  • Redshift for Amazon Redshift

  • Storage Gateway for Storage Gateway

  • S3 for Amazon S3

  • Timestream for Amazon Timestream

  • VirtualMachine for virtual machines

source

pub fn copy_source_tags_to_restored_resource(self, input: bool) -> Self

This is an optional parameter. If this equals True, tags included in the backup will be copied to the restored resource.

This can only be applied to backups created through Backup.

source

pub fn set_copy_source_tags_to_restored_resource( self, input: Option<bool> ) -> Self

This is an optional parameter. If this equals True, tags included in the backup will be copied to the restored resource.

This can only be applied to backups created through Backup.

source

pub fn get_copy_source_tags_to_restored_resource(&self) -> &Option<bool>

This is an optional parameter. If this equals True, tags included in the backup will be copied to the restored resource.

This can only be applied to backups created through Backup.

Trait Implementations§

source§

impl Clone for StartRestoreJobFluentBuilder

source§

fn clone(&self) -> StartRestoreJobFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for StartRestoreJobFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more