pub struct CreateRestoreTestingSelectionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateRestoreTestingSelection.
This request can be sent after CreateRestoreTestingPlan request returns successfully. This is the second part of creating a resource testing plan, and it must be completed sequentially.
This consists of RestoreTestingSelectionName, ProtectedResourceType, and one of the following:
-
ProtectedResourceArns -
ProtectedResourceConditions
Each protected resource type can have one single value.
A restore testing selection can include a wildcard value ("*") for ProtectedResourceArns along with ProtectedResourceConditions. Alternatively, you can include up to 30 specific protected resource ARNs in ProtectedResourceArns.
Cannot select by both protected resource types AND specific ARNs. Request will fail if both are included.
Implementations§
Source§impl CreateRestoreTestingSelectionFluentBuilder
impl CreateRestoreTestingSelectionFluentBuilder
Sourcepub fn as_input(&self) -> &CreateRestoreTestingSelectionInputBuilder
pub fn as_input(&self) -> &CreateRestoreTestingSelectionInputBuilder
Access the CreateRestoreTestingSelection as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateRestoreTestingSelectionOutput, SdkError<CreateRestoreTestingSelectionError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateRestoreTestingSelectionOutput, SdkError<CreateRestoreTestingSelectionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateRestoreTestingSelectionOutput, CreateRestoreTestingSelectionError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateRestoreTestingSelectionOutput, CreateRestoreTestingSelectionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn creator_request_id(self, input: impl Into<String>) -> Self
pub fn creator_request_id(self, input: impl Into<String>) -> Self
This is an optional unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.
Sourcepub fn set_creator_request_id(self, input: Option<String>) -> Self
pub fn set_creator_request_id(self, input: Option<String>) -> Self
This is an optional unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.
Sourcepub fn get_creator_request_id(&self) -> &Option<String>
pub fn get_creator_request_id(&self) -> &Option<String>
This is an optional unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.
Sourcepub fn restore_testing_plan_name(self, input: impl Into<String>) -> Self
pub fn restore_testing_plan_name(self, input: impl Into<String>) -> Self
Input the restore testing plan name that was returned from the related CreateRestoreTestingPlan request.
Sourcepub fn set_restore_testing_plan_name(self, input: Option<String>) -> Self
pub fn set_restore_testing_plan_name(self, input: Option<String>) -> Self
Input the restore testing plan name that was returned from the related CreateRestoreTestingPlan request.
Sourcepub fn get_restore_testing_plan_name(&self) -> &Option<String>
pub fn get_restore_testing_plan_name(&self) -> &Option<String>
Input the restore testing plan name that was returned from the related CreateRestoreTestingPlan request.
Sourcepub fn restore_testing_selection(
self,
input: RestoreTestingSelectionForCreate,
) -> Self
pub fn restore_testing_selection( self, input: RestoreTestingSelectionForCreate, ) -> Self
This consists of RestoreTestingSelectionName, ProtectedResourceType, and one of the following:
-
ProtectedResourceArns -
ProtectedResourceConditions
Each protected resource type can have one single value.
A restore testing selection can include a wildcard value ("*") for ProtectedResourceArns along with ProtectedResourceConditions. Alternatively, you can include up to 30 specific protected resource ARNs in ProtectedResourceArns.
Sourcepub fn set_restore_testing_selection(
self,
input: Option<RestoreTestingSelectionForCreate>,
) -> Self
pub fn set_restore_testing_selection( self, input: Option<RestoreTestingSelectionForCreate>, ) -> Self
This consists of RestoreTestingSelectionName, ProtectedResourceType, and one of the following:
-
ProtectedResourceArns -
ProtectedResourceConditions
Each protected resource type can have one single value.
A restore testing selection can include a wildcard value ("*") for ProtectedResourceArns along with ProtectedResourceConditions. Alternatively, you can include up to 30 specific protected resource ARNs in ProtectedResourceArns.
Sourcepub fn get_restore_testing_selection(
&self,
) -> &Option<RestoreTestingSelectionForCreate>
pub fn get_restore_testing_selection( &self, ) -> &Option<RestoreTestingSelectionForCreate>
This consists of RestoreTestingSelectionName, ProtectedResourceType, and one of the following:
-
ProtectedResourceArns -
ProtectedResourceConditions
Each protected resource type can have one single value.
A restore testing selection can include a wildcard value ("*") for ProtectedResourceArns along with ProtectedResourceConditions. Alternatively, you can include up to 30 specific protected resource ARNs in ProtectedResourceArns.
Trait Implementations§
Source§impl Clone for CreateRestoreTestingSelectionFluentBuilder
impl Clone for CreateRestoreTestingSelectionFluentBuilder
Source§fn clone(&self) -> CreateRestoreTestingSelectionFluentBuilder
fn clone(&self) -> CreateRestoreTestingSelectionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateRestoreTestingSelectionFluentBuilder
impl !RefUnwindSafe for CreateRestoreTestingSelectionFluentBuilder
impl Send for CreateRestoreTestingSelectionFluentBuilder
impl Sync for CreateRestoreTestingSelectionFluentBuilder
impl Unpin for CreateRestoreTestingSelectionFluentBuilder
impl !UnwindSafe for CreateRestoreTestingSelectionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);