Struct aws_sdk_backup::operation::start_restore_job::builders::StartRestoreJobInputBuilder

source ·

#[non_exhaustive]
pub struct StartRestoreJobInputBuilder { /* private fields */ }

Expand description

A builder for StartRestoreJobInput.

Implementations§

source §

impl StartRestoreJobInputBuilder

source

pub fn recovery_point_arn(self, input: impl Into<String>) -> Self

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn set_recovery_point_arn(self, input: Option<String>) -> Self

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn get_recovery_point_arn(&self) -> &Option<String>

An ARN that uniquely identifies a recovery point; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45.

source

pub fn metadata(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to metadata.

To override the contents of this collection use set_metadata.

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.
Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.
KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.
PerformanceMode: Specifies the throughput mode of the file system.
CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.
newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.
ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn set_metadata(self, input: Option<HashMap<String, String>>) -> Self

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.
Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.
KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.
PerformanceMode: Specifies the throughput mode of the file system.
CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.
newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.
ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn get_metadata(&self) -> &Option<HashMap<String, String>>

A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.

You can get configuration metadata about a resource at the time it was backed up by calling GetRecoveryPointRestoreMetadata. However, values in addition to those provided by GetRecoveryPointRestoreMetadata might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.

You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:

file-system-id: The ID of the Amazon EFS file system that is backed up by Backup. Returned in GetRecoveryPointRestoreMetadata.
Encrypted: A Boolean value that, if true, specifies that the file system is encrypted. If KmsKeyId is specified, Encrypted must be set to true.
KmsKeyId: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.
PerformanceMode: Specifies the throughput mode of the file system.
CreationToken: A user-supplied value that ensures the uniqueness (idempotency) of the request.
newFileSystem: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.
ItemsToRestore: An array of one to five strings where each string is a file path. Use ItemsToRestore to restore specific files or directories rather than the entire file system. This parameter is optional. For example, "itemsToRestore":"[\"/my.test\"]".

source

pub fn iam_role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn set_iam_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn get_iam_role_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target resource; for example: arn:aws:iam::123456789012:role/S3Access.

source

pub fn idempotency_token(self, input: impl Into<String>) -> Self

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source

pub fn set_idempotency_token(self, input: Option<String>) -> Self

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source

pub fn get_idempotency_token(&self) -> &Option<String>

A customer-chosen string that you can use to distinguish between otherwise identical calls to StartRestoreJob. Retrying a successful request with the same idempotency token results in a success message with no action taken.

source