#[non_exhaustive]pub struct TrafficSourceState {
pub traffic_source: Option<String>,
pub state: Option<String>,
pub identifier: Option<String>,
pub type: Option<String>,
}
Expand description
Describes the state of a traffic source.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.traffic_source: Option<String>
This is replaced by Identifier
.
state: Option<String>
Describes the current state of a traffic source.
The state values are as follows:
-
Adding
- The Auto Scaling instances are being registered with the load balancer or target group. -
Added
- All Auto Scaling instances are registered with the load balancer or target group. -
InService
- For an Elastic Load Balancing load balancer or target group, at least one Auto Scaling instance passed anELB
health check. For VPC Lattice, at least one Auto Scaling instance passed anVPC_LATTICE
health check. -
Removing
- The Auto Scaling instances are being deregistered from the load balancer or target group. If connection draining (deregistration delay) is enabled, Elastic Load Balancing or VPC Lattice waits for in-flight requests to complete before deregistering the instances. -
Removed
- All Auto Scaling instances are deregistered from the load balancer or target group.
identifier: Option<String>
The unique identifier of the traffic source.
type: Option<String>
Provides additional context for the value of Identifier
.
The following lists the valid values:
-
elb
ifIdentifier
is the name of a Classic Load Balancer. -
elbv2
ifIdentifier
is the ARN of an Application Load Balancer, Gateway Load Balancer, or Network Load Balancer target group. -
vpc-lattice
ifIdentifier
is the ARN of a VPC Lattice target group.
Required if the identifier is the name of a Classic Load Balancer.
Implementations§
Source§impl TrafficSourceState
impl TrafficSourceState
Sourcepub fn traffic_source(&self) -> Option<&str>
👎Deprecated: TrafficSource has been replaced by Identifier
pub fn traffic_source(&self) -> Option<&str>
This is replaced by Identifier
.
Sourcepub fn state(&self) -> Option<&str>
pub fn state(&self) -> Option<&str>
Describes the current state of a traffic source.
The state values are as follows:
-
Adding
- The Auto Scaling instances are being registered with the load balancer or target group. -
Added
- All Auto Scaling instances are registered with the load balancer or target group. -
InService
- For an Elastic Load Balancing load balancer or target group, at least one Auto Scaling instance passed anELB
health check. For VPC Lattice, at least one Auto Scaling instance passed anVPC_LATTICE
health check. -
Removing
- The Auto Scaling instances are being deregistered from the load balancer or target group. If connection draining (deregistration delay) is enabled, Elastic Load Balancing or VPC Lattice waits for in-flight requests to complete before deregistering the instances. -
Removed
- All Auto Scaling instances are deregistered from the load balancer or target group.
Sourcepub fn identifier(&self) -> Option<&str>
pub fn identifier(&self) -> Option<&str>
The unique identifier of the traffic source.
Sourcepub fn type(&self) -> Option<&str>
pub fn type(&self) -> Option<&str>
Provides additional context for the value of Identifier
.
The following lists the valid values:
-
elb
ifIdentifier
is the name of a Classic Load Balancer. -
elbv2
ifIdentifier
is the ARN of an Application Load Balancer, Gateway Load Balancer, or Network Load Balancer target group. -
vpc-lattice
ifIdentifier
is the ARN of a VPC Lattice target group.
Required if the identifier is the name of a Classic Load Balancer.
Source§impl TrafficSourceState
impl TrafficSourceState
Sourcepub fn builder() -> TrafficSourceStateBuilder
pub fn builder() -> TrafficSourceStateBuilder
Creates a new builder-style object to manufacture TrafficSourceState
.
Trait Implementations§
Source§impl Clone for TrafficSourceState
impl Clone for TrafficSourceState
Source§fn clone(&self) -> TrafficSourceState
fn clone(&self) -> TrafficSourceState
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for TrafficSourceState
impl Debug for TrafficSourceState
Source§impl PartialEq for TrafficSourceState
impl PartialEq for TrafficSourceState
impl StructuralPartialEq for TrafficSourceState
Auto Trait Implementations§
impl Freeze for TrafficSourceState
impl RefUnwindSafe for TrafficSourceState
impl Send for TrafficSourceState
impl Sync for TrafficSourceState
impl Unpin for TrafficSourceState
impl UnwindSafe for TrafficSourceState
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);