pub struct RollbackInstanceRefreshFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to RollbackInstanceRefresh.
Cancels an instance refresh that is in progress and rolls back any changes that it made. Amazon EC2 Auto Scaling replaces any instances that were replaced during the instance refresh. This restores your Auto Scaling group to the configuration that it was using before the start of the instance refresh.
This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
A rollback is not supported in the following situations:
-
There is no desired configuration specified for the instance refresh.
-
The Auto Scaling group has a launch template that uses an Amazon Web Services Systems Manager parameter instead of an AMI ID for the
ImageIdproperty. -
The Auto Scaling group uses the launch template's
$Latestor$Defaultversion.
When you receive a successful response from this operation, Amazon EC2 Auto Scaling immediately begins replacing instances. You can check the status of this operation through the DescribeInstanceRefreshes API operation.
Implementations§
Source§impl RollbackInstanceRefreshFluentBuilder
impl RollbackInstanceRefreshFluentBuilder
Sourcepub fn as_input(&self) -> &RollbackInstanceRefreshInputBuilder
pub fn as_input(&self) -> &RollbackInstanceRefreshInputBuilder
Access the RollbackInstanceRefresh as a reference.
Sourcepub async fn send(
self,
) -> Result<RollbackInstanceRefreshOutput, SdkError<RollbackInstanceRefreshError, HttpResponse>>
pub async fn send( self, ) -> Result<RollbackInstanceRefreshOutput, SdkError<RollbackInstanceRefreshError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<RollbackInstanceRefreshOutput, RollbackInstanceRefreshError, Self>
pub fn customize( self, ) -> CustomizableOperation<RollbackInstanceRefreshOutput, RollbackInstanceRefreshError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn auto_scaling_group_name(self, input: impl Into<String>) -> Self
pub fn auto_scaling_group_name(self, input: impl Into<String>) -> Self
The name of the Auto Scaling group.
Sourcepub fn set_auto_scaling_group_name(self, input: Option<String>) -> Self
pub fn set_auto_scaling_group_name(self, input: Option<String>) -> Self
The name of the Auto Scaling group.
Sourcepub fn get_auto_scaling_group_name(&self) -> &Option<String>
pub fn get_auto_scaling_group_name(&self) -> &Option<String>
The name of the Auto Scaling group.
Trait Implementations§
Source§impl Clone for RollbackInstanceRefreshFluentBuilder
impl Clone for RollbackInstanceRefreshFluentBuilder
Source§fn clone(&self) -> RollbackInstanceRefreshFluentBuilder
fn clone(&self) -> RollbackInstanceRefreshFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for RollbackInstanceRefreshFluentBuilder
impl !RefUnwindSafe for RollbackInstanceRefreshFluentBuilder
impl Send for RollbackInstanceRefreshFluentBuilder
impl Sync for RollbackInstanceRefreshFluentBuilder
impl Unpin for RollbackInstanceRefreshFluentBuilder
impl !UnwindSafe for RollbackInstanceRefreshFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);