#[non_exhaustive]pub struct ExecutePolicyInput {
pub auto_scaling_group_name: Option<String>,
pub policy_name: Option<String>,
pub honor_cooldown: Option<bool>,
pub metric_value: Option<f64>,
pub breach_threshold: Option<f64>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.auto_scaling_group_name: Option<String>
The name of the Auto Scaling group.
policy_name: Option<String>
The name or ARN of the policy.
honor_cooldown: Option<bool>
Indicates whether Amazon EC2 Auto Scaling waits for the cooldown period to complete before executing the policy.
Valid only if the policy type is SimpleScaling
. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
metric_value: Option<f64>
The metric value to compare to BreachThreshold
. This enables you to execute a policy of type StepScaling
and determine which step adjustment to use. For example, if the breach threshold is 50 and you want to use a step adjustment with a lower bound of 0 and an upper bound of 10, you can set the metric value to 59.
If you specify a metric value that doesn't correspond to a step adjustment for the policy, the call returns an error.
Required if the policy type is StepScaling
and not supported otherwise.
breach_threshold: Option<f64>
The breach threshold for the alarm.
Required if the policy type is StepScaling
and not supported otherwise.
Implementations§
Source§impl ExecutePolicyInput
impl ExecutePolicyInput
Sourcepub fn auto_scaling_group_name(&self) -> Option<&str>
pub fn auto_scaling_group_name(&self) -> Option<&str>
The name of the Auto Scaling group.
Sourcepub fn policy_name(&self) -> Option<&str>
pub fn policy_name(&self) -> Option<&str>
The name or ARN of the policy.
Sourcepub fn honor_cooldown(&self) -> Option<bool>
pub fn honor_cooldown(&self) -> Option<bool>
Indicates whether Amazon EC2 Auto Scaling waits for the cooldown period to complete before executing the policy.
Valid only if the policy type is SimpleScaling
. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
Sourcepub fn metric_value(&self) -> Option<f64>
pub fn metric_value(&self) -> Option<f64>
The metric value to compare to BreachThreshold
. This enables you to execute a policy of type StepScaling
and determine which step adjustment to use. For example, if the breach threshold is 50 and you want to use a step adjustment with a lower bound of 0 and an upper bound of 10, you can set the metric value to 59.
If you specify a metric value that doesn't correspond to a step adjustment for the policy, the call returns an error.
Required if the policy type is StepScaling
and not supported otherwise.
Sourcepub fn breach_threshold(&self) -> Option<f64>
pub fn breach_threshold(&self) -> Option<f64>
The breach threshold for the alarm.
Required if the policy type is StepScaling
and not supported otherwise.
Source§impl ExecutePolicyInput
impl ExecutePolicyInput
Sourcepub fn builder() -> ExecutePolicyInputBuilder
pub fn builder() -> ExecutePolicyInputBuilder
Creates a new builder-style object to manufacture ExecutePolicyInput
.
Trait Implementations§
Source§impl Clone for ExecutePolicyInput
impl Clone for ExecutePolicyInput
Source§fn clone(&self) -> ExecutePolicyInput
fn clone(&self) -> ExecutePolicyInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ExecutePolicyInput
impl Debug for ExecutePolicyInput
Source§impl PartialEq for ExecutePolicyInput
impl PartialEq for ExecutePolicyInput
impl StructuralPartialEq for ExecutePolicyInput
Auto Trait Implementations§
impl Freeze for ExecutePolicyInput
impl RefUnwindSafe for ExecutePolicyInput
impl Send for ExecutePolicyInput
impl Sync for ExecutePolicyInput
impl Unpin for ExecutePolicyInput
impl UnwindSafe for ExecutePolicyInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);