UpdateAutoScalingGroupFluentBuilder

aws_sdk_autoscaling::operation::update_auto_scaling_group::builders

Struct UpdateAutoScalingGroupFluentBuilder 

Source 
pub struct UpdateAutoScalingGroupFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to UpdateAutoScalingGroup.

We strongly recommend that all Auto Scaling groups use launch templates to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.

Updates the configuration for the specified Auto Scaling group.

To update an Auto Scaling group, specify the name of the group and the property that you want to change. Any properties that you don't specify are not changed by this update request. The new settings take effect on any scaling activities after this call returns.

If you associate a new launch configuration or template with an Auto Scaling group, all new instances will get the updated configuration. Existing instances continue to run with the configuration that they were originally launched with. When you update a group to specify a mixed instances policy instead of a launch configuration or template, existing instances may be replaced to match the new purchasing options that you specified in the policy. For example, if the group currently has 100% On-Demand capacity and the policy specifies 50% Spot capacity, this means that half of your instances will be gradually terminated and relaunched as Spot Instances. When replacing instances, Amazon EC2 Auto Scaling launches new instances before terminating the old ones, so that updating your group does not compromise the performance or availability of your application.

Note the following about changing DesiredCapacity, MaxSize, or MinSize:

  • If a scale-in activity occurs as a result of a new DesiredCapacity value that is lower than the current size of the group, the Auto Scaling group uses its termination policy to determine which instances to terminate.

  • If you specify a new value for MinSize without specifying a value for DesiredCapacity, and the new MinSize is larger than the current size of the group, this sets the group's DesiredCapacity to the new MinSize value.

  • If you specify a new value for MaxSize without specifying a value for DesiredCapacity, and the new MaxSize is smaller than the current size of the group, this sets the group's DesiredCapacity to the new MaxSize value.

To see which properties have been set, call the DescribeAutoScalingGroups API. To view the scaling policies for an Auto Scaling group, call the DescribePolicies API. If the group has scaling policies, you can update them by calling the PutScalingPolicy API.

Implementations§

Source§

impl UpdateAutoScalingGroupFluentBuilder

Source

pub fn as_input(&self) -> &UpdateAutoScalingGroupInputBuilder

Access the UpdateAutoScalingGroup as a reference.

Source

pub async fn send( self, ) -> Result<UpdateAutoScalingGroupOutput, SdkError<UpdateAutoScalingGroupError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<UpdateAutoScalingGroupOutput, UpdateAutoScalingGroupError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn auto_scaling_group_name(self, input: impl Into<String>) -> Self

The name of the Auto Scaling group.

Source

pub fn set_auto_scaling_group_name(self, input: Option<String>) -> Self

The name of the Auto Scaling group.

Source

pub fn get_auto_scaling_group_name(&self) -> &Option<String>

The name of the Auto Scaling group.

Source

pub fn launch_configuration_name(self, input: impl Into<String>) -> Self

The name of the launch configuration. If you specify LaunchConfigurationName in your update request, you can't specify LaunchTemplate or MixedInstancesPolicy.

Source

pub fn set_launch_configuration_name(self, input: Option<String>) -> Self

The name of the launch configuration. If you specify LaunchConfigurationName in your update request, you can't specify LaunchTemplate or MixedInstancesPolicy.

Source

pub fn get_launch_configuration_name(&self) -> &Option<String>

The name of the launch configuration. If you specify LaunchConfigurationName in your update request, you can't specify LaunchTemplate or MixedInstancesPolicy.

Source

pub fn launch_template(self, input: LaunchTemplateSpecification) -> Self

The launch template and version to use to specify the updates. If you specify LaunchTemplate in your update request, you can't specify LaunchConfigurationName or MixedInstancesPolicy.

Source

pub fn set_launch_template( self, input: Option<LaunchTemplateSpecification>, ) -> Self

The launch template and version to use to specify the updates. If you specify LaunchTemplate in your update request, you can't specify LaunchConfigurationName or MixedInstancesPolicy.

Source

pub fn get_launch_template(&self) -> &Option<LaunchTemplateSpecification>

The launch template and version to use to specify the updates. If you specify LaunchTemplate in your update request, you can't specify LaunchConfigurationName or MixedInstancesPolicy.

Source

pub fn mixed_instances_policy(self, input: MixedInstancesPolicy) -> Self

The mixed instances policy. For more information, see Auto Scaling groups with multiple instance types and purchase options in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_mixed_instances_policy( self, input: Option<MixedInstancesPolicy>, ) -> Self

The mixed instances policy. For more information, see Auto Scaling groups with multiple instance types and purchase options in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_mixed_instances_policy(&self) -> &Option<MixedInstancesPolicy>

The mixed instances policy. For more information, see Auto Scaling groups with multiple instance types and purchase options in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn min_size(self, input: i32) -> Self

The minimum size of the Auto Scaling group.

Source

pub fn set_min_size(self, input: Option<i32>) -> Self

The minimum size of the Auto Scaling group.

Source

pub fn get_min_size(&self) -> &Option<i32>

The minimum size of the Auto Scaling group.

Source

pub fn max_size(self, input: i32) -> Self

The maximum size of the Auto Scaling group.

With a mixed instances policy that uses instance weighting, Amazon EC2 Auto Scaling may need to go above MaxSize to meet your capacity requirements. In this event, Amazon EC2 Auto Scaling will never go above MaxSize by more than your largest instance weight (weights that define how many units each instance contributes to the desired capacity of the group).

Source

pub fn set_max_size(self, input: Option<i32>) -> Self

The maximum size of the Auto Scaling group.

With a mixed instances policy that uses instance weighting, Amazon EC2 Auto Scaling may need to go above MaxSize to meet your capacity requirements. In this event, Amazon EC2 Auto Scaling will never go above MaxSize by more than your largest instance weight (weights that define how many units each instance contributes to the desired capacity of the group).

Source

pub fn get_max_size(&self) -> &Option<i32>

The maximum size of the Auto Scaling group.

With a mixed instances policy that uses instance weighting, Amazon EC2 Auto Scaling may need to go above MaxSize to meet your capacity requirements. In this event, Amazon EC2 Auto Scaling will never go above MaxSize by more than your largest instance weight (weights that define how many units each instance contributes to the desired capacity of the group).

Source

pub fn desired_capacity(self, input: i32) -> Self

The desired capacity is the initial capacity of the Auto Scaling group after this operation completes and the capacity it attempts to maintain. This number must be greater than or equal to the minimum size of the group and less than or equal to the maximum size of the group.

Source

pub fn set_desired_capacity(self, input: Option<i32>) -> Self

The desired capacity is the initial capacity of the Auto Scaling group after this operation completes and the capacity it attempts to maintain. This number must be greater than or equal to the minimum size of the group and less than or equal to the maximum size of the group.

Source

pub fn get_desired_capacity(&self) -> &Option<i32>

The desired capacity is the initial capacity of the Auto Scaling group after this operation completes and the capacity it attempts to maintain. This number must be greater than or equal to the minimum size of the group and less than or equal to the maximum size of the group.

Source

pub fn default_cooldown(self, input: i32) -> Self

Only needed if you use simple scaling policies.

The amount of time, in seconds, between one scaling activity ending and another one starting due to simple scaling policies. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_default_cooldown(self, input: Option<i32>) -> Self

Only needed if you use simple scaling policies.

The amount of time, in seconds, between one scaling activity ending and another one starting due to simple scaling policies. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_default_cooldown(&self) -> &Option<i32>

Only needed if you use simple scaling policies.

The amount of time, in seconds, between one scaling activity ending and another one starting due to simple scaling policies. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn availability_zones(self, input: impl Into<String>) -> Self

Appends an item to AvailabilityZones.

To override the contents of this collection use set_availability_zones.

One or more Availability Zones for the group.

Source

pub fn set_availability_zones(self, input: Option<Vec<String>>) -> Self

One or more Availability Zones for the group.

Source

pub fn get_availability_zones(&self) -> &Option<Vec<String>>

One or more Availability Zones for the group.

Source

pub fn health_check_type(self, input: impl Into<String>) -> Self

A comma-separated value string of one or more health check types.

The valid values are EC2, EBS, ELB, and VPC_LATTICE. EC2 is the default health check and cannot be disabled. For more information, see Health checks for instances in an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Only specify EC2 if you must clear a value that was previously set.

Source

pub fn set_health_check_type(self, input: Option<String>) -> Self

A comma-separated value string of one or more health check types.

The valid values are EC2, EBS, ELB, and VPC_LATTICE. EC2 is the default health check and cannot be disabled. For more information, see Health checks for instances in an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Only specify EC2 if you must clear a value that was previously set.

Source

pub fn get_health_check_type(&self) -> &Option<String>

A comma-separated value string of one or more health check types.

The valid values are EC2, EBS, ELB, and VPC_LATTICE. EC2 is the default health check and cannot be disabled. For more information, see Health checks for instances in an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Only specify EC2 if you must clear a value that was previously set.

Source

pub fn health_check_grace_period(self, input: i32) -> Self

The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before checking the health status of an EC2 instance that has come into service and marking it unhealthy due to a failed health check. This is useful if your instances do not immediately pass their health checks after they enter the InService state. For more information, see Set the health check grace period for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_health_check_grace_period(self, input: Option<i32>) -> Self

The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before checking the health status of an EC2 instance that has come into service and marking it unhealthy due to a failed health check. This is useful if your instances do not immediately pass their health checks after they enter the InService state. For more information, see Set the health check grace period for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_health_check_grace_period(&self) -> &Option<i32>

The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before checking the health status of an EC2 instance that has come into service and marking it unhealthy due to a failed health check. This is useful if your instances do not immediately pass their health checks after they enter the InService state. For more information, see Set the health check grace period for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn placement_group(self, input: impl Into<String>) -> Self

The name of an existing placement group into which to launch your instances. To remove the placement group setting, pass an empty string for placement-group. For more information about placement groups, see Placement groups in the Amazon EC2 User Guide.

A cluster placement group is a logical grouping of instances within a single Availability Zone. You cannot specify multiple Availability Zones and a cluster placement group.

Source

pub fn set_placement_group(self, input: Option<String>) -> Self

The name of an existing placement group into which to launch your instances. To remove the placement group setting, pass an empty string for placement-group. For more information about placement groups, see Placement groups in the Amazon EC2 User Guide.

A cluster placement group is a logical grouping of instances within a single Availability Zone. You cannot specify multiple Availability Zones and a cluster placement group.

Source

pub fn get_placement_group(&self) -> &Option<String>

The name of an existing placement group into which to launch your instances. To remove the placement group setting, pass an empty string for placement-group. For more information about placement groups, see Placement groups in the Amazon EC2 User Guide.

A cluster placement group is a logical grouping of instances within a single Availability Zone. You cannot specify multiple Availability Zones and a cluster placement group.

Source

pub fn vpc_zone_identifier(self, input: impl Into<String>) -> Self

A comma-separated list of subnet IDs for a virtual private cloud (VPC). If you specify VPCZoneIdentifier with AvailabilityZones, the subnets that you specify must reside in those Availability Zones.

Source

pub fn set_vpc_zone_identifier(self, input: Option<String>) -> Self

A comma-separated list of subnet IDs for a virtual private cloud (VPC). If you specify VPCZoneIdentifier with AvailabilityZones, the subnets that you specify must reside in those Availability Zones.

Source

pub fn get_vpc_zone_identifier(&self) -> &Option<String>

A comma-separated list of subnet IDs for a virtual private cloud (VPC). If you specify VPCZoneIdentifier with AvailabilityZones, the subnets that you specify must reside in those Availability Zones.

Source

pub fn termination_policies(self, input: impl Into<String>) -> Self

Appends an item to TerminationPolicies.

To override the contents of this collection use set_termination_policies.

A policy or a list of policies that are used to select the instances to terminate. The policies are executed in the order that you list them. For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Valid values: Default | AllocationStrategy | ClosestToNextInstanceHour | NewestInstance | OldestInstance | OldestLaunchConfiguration | OldestLaunchTemplate | arn:aws:lambda:region:account-id:function:my-function:my-alias

Source

pub fn set_termination_policies(self, input: Option<Vec<String>>) -> Self

A policy or a list of policies that are used to select the instances to terminate. The policies are executed in the order that you list them. For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Valid values: Default | AllocationStrategy | ClosestToNextInstanceHour | NewestInstance | OldestInstance | OldestLaunchConfiguration | OldestLaunchTemplate | arn:aws:lambda:region:account-id:function:my-function:my-alias

Source

pub fn get_termination_policies(&self) -> &Option<Vec<String>>

A policy or a list of policies that are used to select the instances to terminate. The policies are executed in the order that you list them. For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.

Valid values: Default | AllocationStrategy | ClosestToNextInstanceHour | NewestInstance | OldestInstance | OldestLaunchConfiguration | OldestLaunchTemplate | arn:aws:lambda:region:account-id:function:my-function:my-alias

Source

pub fn new_instances_protected_from_scale_in(self, input: bool) -> Self

Indicates whether newly launched instances are protected from termination by Amazon EC2 Auto Scaling when scaling in. For more information about preventing instances from terminating on scale in, see Use instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_new_instances_protected_from_scale_in( self, input: Option<bool>, ) -> Self

Indicates whether newly launched instances are protected from termination by Amazon EC2 Auto Scaling when scaling in. For more information about preventing instances from terminating on scale in, see Use instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_new_instances_protected_from_scale_in(&self) -> &Option<bool>

Indicates whether newly launched instances are protected from termination by Amazon EC2 Auto Scaling when scaling in. For more information about preventing instances from terminating on scale in, see Use instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn service_linked_role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the service-linked role that the Auto Scaling group uses to call other Amazon Web Services on your behalf. For more information, see Service-linked roles in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_service_linked_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the service-linked role that the Auto Scaling group uses to call other Amazon Web Services on your behalf. For more information, see Service-linked roles in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_service_linked_role_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the service-linked role that the Auto Scaling group uses to call other Amazon Web Services on your behalf. For more information, see Service-linked roles in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn max_instance_lifetime(self, input: i32) -> Self

The maximum amount of time, in seconds, that an instance can be in service. The default is null. If specified, the value must be either 0 or a number equal to or greater than 86,400 seconds (1 day). To clear a previously set value, specify a new value of 0. For more information, see Replacing Auto Scaling instances based on maximum instance lifetime in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_max_instance_lifetime(self, input: Option<i32>) -> Self

The maximum amount of time, in seconds, that an instance can be in service. The default is null. If specified, the value must be either 0 or a number equal to or greater than 86,400 seconds (1 day). To clear a previously set value, specify a new value of 0. For more information, see Replacing Auto Scaling instances based on maximum instance lifetime in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_max_instance_lifetime(&self) -> &Option<i32>

The maximum amount of time, in seconds, that an instance can be in service. The default is null. If specified, the value must be either 0 or a number equal to or greater than 86,400 seconds (1 day). To clear a previously set value, specify a new value of 0. For more information, see Replacing Auto Scaling instances based on maximum instance lifetime in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn capacity_rebalance(self, input: bool) -> Self

Enables or disables Capacity Rebalancing. If Capacity Rebalancing is disabled, proactive replacement of at-risk Spot Instances does not occur. For more information, see Capacity Rebalancing in Auto Scaling to replace at-risk Spot Instances in the Amazon EC2 Auto Scaling User Guide.

To suspend rebalancing across Availability Zones, use the SuspendProcesses API.

Source

pub fn set_capacity_rebalance(self, input: Option<bool>) -> Self

Enables or disables Capacity Rebalancing. If Capacity Rebalancing is disabled, proactive replacement of at-risk Spot Instances does not occur. For more information, see Capacity Rebalancing in Auto Scaling to replace at-risk Spot Instances in the Amazon EC2 Auto Scaling User Guide.

To suspend rebalancing across Availability Zones, use the SuspendProcesses API.

Source

pub fn get_capacity_rebalance(&self) -> &Option<bool>

Enables or disables Capacity Rebalancing. If Capacity Rebalancing is disabled, proactive replacement of at-risk Spot Instances does not occur. For more information, see Capacity Rebalancing in Auto Scaling to replace at-risk Spot Instances in the Amazon EC2 Auto Scaling User Guide.

To suspend rebalancing across Availability Zones, use the SuspendProcesses API.

Source

pub fn context(self, input: impl Into<String>) -> Self

Reserved.

Source

pub fn set_context(self, input: Option<String>) -> Self

Reserved.

Source

pub fn get_context(&self) -> &Option<String>

Reserved.

Source

pub fn desired_capacity_type(self, input: impl Into<String>) -> Self

The unit of measurement for the value specified for desired capacity. Amazon EC2 Auto Scaling supports DesiredCapacityType for attribute-based instance type selection only. For more information, see Create a mixed instances group using attribute-based instance type selection in the Amazon EC2 Auto Scaling User Guide.

By default, Amazon EC2 Auto Scaling specifies units, which translates into number of instances.

Valid values: units | vcpu | memory-mib

Source

pub fn set_desired_capacity_type(self, input: Option<String>) -> Self

The unit of measurement for the value specified for desired capacity. Amazon EC2 Auto Scaling supports DesiredCapacityType for attribute-based instance type selection only. For more information, see Create a mixed instances group using attribute-based instance type selection in the Amazon EC2 Auto Scaling User Guide.

By default, Amazon EC2 Auto Scaling specifies units, which translates into number of instances.

Valid values: units | vcpu | memory-mib

Source

pub fn get_desired_capacity_type(&self) -> &Option<String>

The unit of measurement for the value specified for desired capacity. Amazon EC2 Auto Scaling supports DesiredCapacityType for attribute-based instance type selection only. For more information, see Create a mixed instances group using attribute-based instance type selection in the Amazon EC2 Auto Scaling User Guide.

By default, Amazon EC2 Auto Scaling specifies units, which translates into number of instances.

Valid values: units | vcpu | memory-mib

Source

pub fn default_instance_warmup(self, input: i32) -> Self

The amount of time, in seconds, until a new instance is considered to have finished initializing and resource consumption to become stable after it enters the InService state.

During an instance refresh, Amazon EC2 Auto Scaling waits for the warm-up period after it replaces an instance before it moves on to replacing the next instance. Amazon EC2 Auto Scaling also waits for the warm-up period before aggregating the metrics for new instances with existing instances in the Amazon CloudWatch metrics that are used for scaling, resulting in more reliable usage data. For more information, see Set the default instance warmup for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

To manage various warm-up settings at the group level, we recommend that you set the default instance warmup, even if it is set to 0 seconds. To remove a value that you previously set, include the property but specify -1 for the value. However, we strongly recommend keeping the default instance warmup enabled by specifying a value of 0 or other nominal value.

Source

pub fn set_default_instance_warmup(self, input: Option<i32>) -> Self

The amount of time, in seconds, until a new instance is considered to have finished initializing and resource consumption to become stable after it enters the InService state.

During an instance refresh, Amazon EC2 Auto Scaling waits for the warm-up period after it replaces an instance before it moves on to replacing the next instance. Amazon EC2 Auto Scaling also waits for the warm-up period before aggregating the metrics for new instances with existing instances in the Amazon CloudWatch metrics that are used for scaling, resulting in more reliable usage data. For more information, see Set the default instance warmup for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

To manage various warm-up settings at the group level, we recommend that you set the default instance warmup, even if it is set to 0 seconds. To remove a value that you previously set, include the property but specify -1 for the value. However, we strongly recommend keeping the default instance warmup enabled by specifying a value of 0 or other nominal value.

Source

pub fn get_default_instance_warmup(&self) -> &Option<i32>

The amount of time, in seconds, until a new instance is considered to have finished initializing and resource consumption to become stable after it enters the InService state.

During an instance refresh, Amazon EC2 Auto Scaling waits for the warm-up period after it replaces an instance before it moves on to replacing the next instance. Amazon EC2 Auto Scaling also waits for the warm-up period before aggregating the metrics for new instances with existing instances in the Amazon CloudWatch metrics that are used for scaling, resulting in more reliable usage data. For more information, see Set the default instance warmup for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.

To manage various warm-up settings at the group level, we recommend that you set the default instance warmup, even if it is set to 0 seconds. To remove a value that you previously set, include the property but specify -1 for the value. However, we strongly recommend keeping the default instance warmup enabled by specifying a value of 0 or other nominal value.

Source

pub fn instance_maintenance_policy( self, input: InstanceMaintenancePolicy, ) -> Self

An instance maintenance policy. For more information, see Set instance maintenance policy in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_instance_maintenance_policy( self, input: Option<InstanceMaintenancePolicy>, ) -> Self

An instance maintenance policy. For more information, see Set instance maintenance policy in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_instance_maintenance_policy( &self, ) -> &Option<InstanceMaintenancePolicy>

An instance maintenance policy. For more information, see Set instance maintenance policy in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn availability_zone_distribution( self, input: AvailabilityZoneDistribution, ) -> Self

The instance capacity distribution across Availability Zones.

Source

pub fn set_availability_zone_distribution( self, input: Option<AvailabilityZoneDistribution>, ) -> Self

The instance capacity distribution across Availability Zones.

Source

pub fn get_availability_zone_distribution( &self, ) -> &Option<AvailabilityZoneDistribution>

The instance capacity distribution across Availability Zones.

Source

pub fn availability_zone_impairment_policy( self, input: AvailabilityZoneImpairmentPolicy, ) -> Self

The policy for Availability Zone impairment.

Source

pub fn set_availability_zone_impairment_policy( self, input: Option<AvailabilityZoneImpairmentPolicy>, ) -> Self

The policy for Availability Zone impairment.

Source

pub fn get_availability_zone_impairment_policy( &self, ) -> &Option<AvailabilityZoneImpairmentPolicy>

The policy for Availability Zone impairment.

Source

pub fn skip_zonal_shift_validation(self, input: bool) -> Self

If you enable zonal shift with cross-zone disabled load balancers, capacity could become imbalanced across Availability Zones. To skip the validation, specify true. For more information, see Auto Scaling group zonal shift in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn set_skip_zonal_shift_validation(self, input: Option<bool>) -> Self

If you enable zonal shift with cross-zone disabled load balancers, capacity could become imbalanced across Availability Zones. To skip the validation, specify true. For more information, see Auto Scaling group zonal shift in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn get_skip_zonal_shift_validation(&self) -> &Option<bool>

If you enable zonal shift with cross-zone disabled load balancers, capacity could become imbalanced across Availability Zones. To skip the validation, specify true. For more information, see Auto Scaling group zonal shift in the Amazon EC2 Auto Scaling User Guide.

Source

pub fn capacity_reservation_specification( self, input: CapacityReservationSpecification, ) -> Self

The capacity reservation specification for the Auto Scaling group.

Source

pub fn set_capacity_reservation_specification( self, input: Option<CapacityReservationSpecification>, ) -> Self

The capacity reservation specification for the Auto Scaling group.

Source

pub fn get_capacity_reservation_specification( &self, ) -> &Option<CapacityReservationSpecification>

The capacity reservation specification for the Auto Scaling group.

Source

pub fn instance_lifecycle_policy(self, input: InstanceLifecyclePolicy) -> Self

The instance lifecycle policy for the Auto Scaling group. Use this to add, modify, or remove lifecycle policies that control instance behavior when an instance transitions through its lifecycle states. Configure retention triggers to specify when to preserve instances for manual intervention.

Source

pub fn set_instance_lifecycle_policy( self, input: Option<InstanceLifecyclePolicy>, ) -> Self

The instance lifecycle policy for the Auto Scaling group. Use this to add, modify, or remove lifecycle policies that control instance behavior when an instance transitions through its lifecycle states. Configure retention triggers to specify when to preserve instances for manual intervention.

Source

pub fn get_instance_lifecycle_policy(&self) -> &Option<InstanceLifecyclePolicy>

The instance lifecycle policy for the Auto Scaling group. Use this to add, modify, or remove lifecycle policies that control instance behavior when an instance transitions through its lifecycle states. Configure retention triggers to specify when to preserve instances for manual intervention.

Trait Implementations§

Source§

impl Clone for UpdateAutoScalingGroupFluentBuilder

Source§

fn clone(&self) -> UpdateAutoScalingGroupFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for UpdateAutoScalingGroupFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more