pub struct StartCalculationExecutionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to StartCalculationExecution.
Submits calculations for execution within a session. You can supply the code to run as an inline code block within the request.
The request syntax requires the StartCalculationExecutionRequest$CodeBlock parameter or the CalculationConfiguration$CodeBlock parameter, but not both. Because CalculationConfiguration$CodeBlock is deprecated, use the StartCalculationExecutionRequest$CodeBlock parameter instead.
Implementations§
Source§impl StartCalculationExecutionFluentBuilder
impl StartCalculationExecutionFluentBuilder
Sourcepub fn as_input(&self) -> &StartCalculationExecutionInputBuilder
pub fn as_input(&self) -> &StartCalculationExecutionInputBuilder
Access the StartCalculationExecution as a reference.
Sourcepub async fn send(
self,
) -> Result<StartCalculationExecutionOutput, SdkError<StartCalculationExecutionError, HttpResponse>>
pub async fn send( self, ) -> Result<StartCalculationExecutionOutput, SdkError<StartCalculationExecutionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<StartCalculationExecutionOutput, StartCalculationExecutionError, Self>
pub fn customize( self, ) -> CustomizableOperation<StartCalculationExecutionOutput, StartCalculationExecutionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn session_id(self, input: impl Into<String>) -> Self
pub fn session_id(self, input: impl Into<String>) -> Self
The session ID.
Sourcepub fn set_session_id(self, input: Option<String>) -> Self
pub fn set_session_id(self, input: Option<String>) -> Self
The session ID.
Sourcepub fn get_session_id(&self) -> &Option<String>
pub fn get_session_id(&self) -> &Option<String>
The session ID.
Sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the calculation.
Sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the calculation.
Sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
A description of the calculation.
Sourcepub fn calculation_configuration(self, input: CalculationConfiguration) -> Self
👎Deprecated: Structure is deprecated.
pub fn calculation_configuration(self, input: CalculationConfiguration) -> Self
Contains configuration information for the calculation.
Sourcepub fn set_calculation_configuration(
self,
input: Option<CalculationConfiguration>,
) -> Self
👎Deprecated: Structure is deprecated.
pub fn set_calculation_configuration( self, input: Option<CalculationConfiguration>, ) -> Self
Contains configuration information for the calculation.
Sourcepub fn get_calculation_configuration(&self) -> &Option<CalculationConfiguration>
👎Deprecated: Structure is deprecated.
pub fn get_calculation_configuration(&self) -> &Option<CalculationConfiguration>
Contains configuration information for the calculation.
Sourcepub fn code_block(self, input: impl Into<String>) -> Self
pub fn code_block(self, input: impl Into<String>) -> Self
A string that contains the code of the calculation. Use this parameter instead of CalculationConfiguration$CodeBlock, which is deprecated.
Sourcepub fn set_code_block(self, input: Option<String>) -> Self
pub fn set_code_block(self, input: Option<String>) -> Self
A string that contains the code of the calculation. Use this parameter instead of CalculationConfiguration$CodeBlock, which is deprecated.
Sourcepub fn get_code_block(&self) -> &Option<String>
pub fn get_code_block(&self) -> &Option<String>
A string that contains the code of the calculation. Use this parameter instead of CalculationConfiguration$CodeBlock, which is deprecated.
Sourcepub fn client_request_token(self, input: impl Into<String>) -> Self
pub fn client_request_token(self, input: impl Into<String>) -> Self
A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another StartCalculationExecutionRequest is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.
This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.
Sourcepub fn set_client_request_token(self, input: Option<String>) -> Self
pub fn set_client_request_token(self, input: Option<String>) -> Self
A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another StartCalculationExecutionRequest is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.
This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.
Sourcepub fn get_client_request_token(&self) -> &Option<String>
pub fn get_client_request_token(&self) -> &Option<String>
A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another StartCalculationExecutionRequest is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.
This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.
Trait Implementations§
Source§impl Clone for StartCalculationExecutionFluentBuilder
impl Clone for StartCalculationExecutionFluentBuilder
Source§fn clone(&self) -> StartCalculationExecutionFluentBuilder
fn clone(&self) -> StartCalculationExecutionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for StartCalculationExecutionFluentBuilder
impl !RefUnwindSafe for StartCalculationExecutionFluentBuilder
impl Send for StartCalculationExecutionFluentBuilder
impl Sync for StartCalculationExecutionFluentBuilder
impl Unpin for StartCalculationExecutionFluentBuilder
impl !UnwindSafe for StartCalculationExecutionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);