#[non_exhaustive]pub struct StartPracticeRunOutput {
pub zonal_shift_id: String,
pub resource_identifier: String,
pub away_from: String,
pub expiry_time: DateTime,
pub start_time: DateTime,
pub status: ZonalShiftStatus,
pub comment: String,
/* private fields */
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.zonal_shift_id: String
The identifier of a practice run zonal shift.
resource_identifier: String
The identifier for the resource that you want to shift traffic for. The identifier is the Amazon Resource Name (ARN) for the resource.
away_from: String
The Availability Zone (for example, use1-az1
) that traffic is shifted away from for the resource that you specify for the practice run.
expiry_time: DateTime
The expiry time (expiration time) for an on-demand practice run zonal shift is 30 minutes from the time when you start the practice run, unless you cancel it before that time. However, be aware that the expiryTime
field for practice run zonal shifts always has a value of 1 minute.
start_time: DateTime
The time (UTC) when the zonal shift starts.
status: ZonalShiftStatus
A status for the practice run (expected status is ACTIVE).
comment: String
The initial comment that you enter about the practice run. Be aware that this comment can be overwritten by Amazon Web Services if the automatic check for balanced capacity fails. For more information, see Capacity checks for practice runs in the Amazon Application Recovery Controller Developer Guide.
Implementations§
Source§impl StartPracticeRunOutput
impl StartPracticeRunOutput
Sourcepub fn zonal_shift_id(&self) -> &str
pub fn zonal_shift_id(&self) -> &str
The identifier of a practice run zonal shift.
Sourcepub fn resource_identifier(&self) -> &str
pub fn resource_identifier(&self) -> &str
The identifier for the resource that you want to shift traffic for. The identifier is the Amazon Resource Name (ARN) for the resource.
Sourcepub fn away_from(&self) -> &str
pub fn away_from(&self) -> &str
The Availability Zone (for example, use1-az1
) that traffic is shifted away from for the resource that you specify for the practice run.
Sourcepub fn expiry_time(&self) -> &DateTime
pub fn expiry_time(&self) -> &DateTime
The expiry time (expiration time) for an on-demand practice run zonal shift is 30 minutes from the time when you start the practice run, unless you cancel it before that time. However, be aware that the expiryTime
field for practice run zonal shifts always has a value of 1 minute.
Sourcepub fn start_time(&self) -> &DateTime
pub fn start_time(&self) -> &DateTime
The time (UTC) when the zonal shift starts.
Sourcepub fn status(&self) -> &ZonalShiftStatus
pub fn status(&self) -> &ZonalShiftStatus
A status for the practice run (expected status is ACTIVE).
Sourcepub fn comment(&self) -> &str
pub fn comment(&self) -> &str
The initial comment that you enter about the practice run. Be aware that this comment can be overwritten by Amazon Web Services if the automatic check for balanced capacity fails. For more information, see Capacity checks for practice runs in the Amazon Application Recovery Controller Developer Guide.
Source§impl StartPracticeRunOutput
impl StartPracticeRunOutput
Sourcepub fn builder() -> StartPracticeRunOutputBuilder
pub fn builder() -> StartPracticeRunOutputBuilder
Creates a new builder-style object to manufacture StartPracticeRunOutput
.
Trait Implementations§
Source§impl Clone for StartPracticeRunOutput
impl Clone for StartPracticeRunOutput
Source§fn clone(&self) -> StartPracticeRunOutput
fn clone(&self) -> StartPracticeRunOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for StartPracticeRunOutput
impl Debug for StartPracticeRunOutput
Source§impl PartialEq for StartPracticeRunOutput
impl PartialEq for StartPracticeRunOutput
Source§impl RequestId for StartPracticeRunOutput
impl RequestId for StartPracticeRunOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.impl StructuralPartialEq for StartPracticeRunOutput
Auto Trait Implementations§
impl Freeze for StartPracticeRunOutput
impl RefUnwindSafe for StartPracticeRunOutput
impl Send for StartPracticeRunOutput
impl Sync for StartPracticeRunOutput
impl Unpin for StartPracticeRunOutput
impl UnwindSafe for StartPracticeRunOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);