#[non_exhaustive]pub struct CreateDataSourceInput {Show 13 fields
pub api_id: Option<String>,
pub name: Option<String>,
pub description: Option<String>,
pub type: Option<DataSourceType>,
pub service_role_arn: Option<String>,
pub dynamodb_config: Option<DynamodbDataSourceConfig>,
pub lambda_config: Option<LambdaDataSourceConfig>,
pub elasticsearch_config: Option<ElasticsearchDataSourceConfig>,
pub open_search_service_config: Option<OpenSearchServiceDataSourceConfig>,
pub http_config: Option<HttpDataSourceConfig>,
pub relational_database_config: Option<RelationalDatabaseDataSourceConfig>,
pub event_bridge_config: Option<EventBridgeDataSourceConfig>,
pub metrics_config: Option<DataSourceLevelMetricsConfig>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.api_id: Option<String>The API ID for the GraphQL API for the DataSource.
name: Option<String>A user-supplied name for the DataSource.
description: Option<String>A description of the DataSource.
type: Option<DataSourceType>The type of the DataSource.
service_role_arn: Option<String>The Identity and Access Management (IAM) service role Amazon Resource Name (ARN) for the data source. The system assumes this role when accessing the data source.
dynamodb_config: Option<DynamodbDataSourceConfig>Amazon DynamoDB settings.
lambda_config: Option<LambdaDataSourceConfig>Lambda settings.
elasticsearch_config: Option<ElasticsearchDataSourceConfig>Amazon OpenSearch Service settings.
As of September 2021, Amazon Elasticsearch service is Amazon OpenSearch Service. This configuration is deprecated. For new data sources, use CreateDataSourceRequest$openSearchServiceConfig to create an OpenSearch data source.
open_search_service_config: Option<OpenSearchServiceDataSourceConfig>Amazon OpenSearch Service settings.
http_config: Option<HttpDataSourceConfig>HTTP endpoint settings.
relational_database_config: Option<RelationalDatabaseDataSourceConfig>Relational database settings.
event_bridge_config: Option<EventBridgeDataSourceConfig>Amazon EventBridge settings.
metrics_config: Option<DataSourceLevelMetricsConfig>Enables or disables enhanced data source metrics for specified data sources. Note that metricsConfig won't be used unless the dataSourceLevelMetricsBehavior value is set to PER_DATA_SOURCE_METRICS. If the dataSourceLevelMetricsBehavior is set to FULL_REQUEST_DATA_SOURCE_METRICS instead, metricsConfig will be ignored. However, you can still set its value.
metricsConfig can be ENABLED or DISABLED.
Implementations§
Source§impl CreateDataSourceInput
impl CreateDataSourceInput
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description of the DataSource.
Sourcepub fn type(&self) -> Option<&DataSourceType>
pub fn type(&self) -> Option<&DataSourceType>
The type of the DataSource.
Sourcepub fn service_role_arn(&self) -> Option<&str>
pub fn service_role_arn(&self) -> Option<&str>
The Identity and Access Management (IAM) service role Amazon Resource Name (ARN) for the data source. The system assumes this role when accessing the data source.
Sourcepub fn dynamodb_config(&self) -> Option<&DynamodbDataSourceConfig>
pub fn dynamodb_config(&self) -> Option<&DynamodbDataSourceConfig>
Amazon DynamoDB settings.
Sourcepub fn lambda_config(&self) -> Option<&LambdaDataSourceConfig>
pub fn lambda_config(&self) -> Option<&LambdaDataSourceConfig>
Lambda settings.
Sourcepub fn elasticsearch_config(&self) -> Option<&ElasticsearchDataSourceConfig>
pub fn elasticsearch_config(&self) -> Option<&ElasticsearchDataSourceConfig>
Amazon OpenSearch Service settings.
As of September 2021, Amazon Elasticsearch service is Amazon OpenSearch Service. This configuration is deprecated. For new data sources, use CreateDataSourceRequest$openSearchServiceConfig to create an OpenSearch data source.
Sourcepub fn open_search_service_config(
&self,
) -> Option<&OpenSearchServiceDataSourceConfig>
pub fn open_search_service_config( &self, ) -> Option<&OpenSearchServiceDataSourceConfig>
Amazon OpenSearch Service settings.
Sourcepub fn http_config(&self) -> Option<&HttpDataSourceConfig>
pub fn http_config(&self) -> Option<&HttpDataSourceConfig>
HTTP endpoint settings.
Sourcepub fn relational_database_config(
&self,
) -> Option<&RelationalDatabaseDataSourceConfig>
pub fn relational_database_config( &self, ) -> Option<&RelationalDatabaseDataSourceConfig>
Relational database settings.
Sourcepub fn event_bridge_config(&self) -> Option<&EventBridgeDataSourceConfig>
pub fn event_bridge_config(&self) -> Option<&EventBridgeDataSourceConfig>
Amazon EventBridge settings.
Sourcepub fn metrics_config(&self) -> Option<&DataSourceLevelMetricsConfig>
pub fn metrics_config(&self) -> Option<&DataSourceLevelMetricsConfig>
Enables or disables enhanced data source metrics for specified data sources. Note that metricsConfig won't be used unless the dataSourceLevelMetricsBehavior value is set to PER_DATA_SOURCE_METRICS. If the dataSourceLevelMetricsBehavior is set to FULL_REQUEST_DATA_SOURCE_METRICS instead, metricsConfig will be ignored. However, you can still set its value.
metricsConfig can be ENABLED or DISABLED.
Source§impl CreateDataSourceInput
impl CreateDataSourceInput
Sourcepub fn builder() -> CreateDataSourceInputBuilder
pub fn builder() -> CreateDataSourceInputBuilder
Creates a new builder-style object to manufacture CreateDataSourceInput.
Trait Implementations§
Source§impl Clone for CreateDataSourceInput
impl Clone for CreateDataSourceInput
Source§fn clone(&self) -> CreateDataSourceInput
fn clone(&self) -> CreateDataSourceInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CreateDataSourceInput
impl Debug for CreateDataSourceInput
Source§impl PartialEq for CreateDataSourceInput
impl PartialEq for CreateDataSourceInput
impl StructuralPartialEq for CreateDataSourceInput
Auto Trait Implementations§
impl Freeze for CreateDataSourceInput
impl RefUnwindSafe for CreateDataSourceInput
impl Send for CreateDataSourceInput
impl Sync for CreateDataSourceInput
impl Unpin for CreateDataSourceInput
impl UnwindSafe for CreateDataSourceInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);