Struct aws_sdk_appmesh::Client

pub struct Client { /* private fields */ }

Client for AWS App Mesh

Client for invoking operations on AWS App Mesh. Each operation on AWS App Mesh is a method on this this struct. .send() MUST be invoked on the generated operations to dispatch the request to the service.

Constructing a Client

A Config is required to construct a client. For most use cases, the aws-config crate should be used to automatically resolve this config using aws_config::load_from_env(), since this will resolve an SdkConfig which can be shared across multiple different AWS SDK clients. This config resolution process can be customized by calling aws_config::from_env() instead, which returns a ConfigLoader that uses the builder pattern to customize the default config.

In the simplest case, creating a client looks as follows:

let config = aws_config::load_from_env().await;
let client = aws_sdk_appmesh::Client::new(&config);

Occasionally, SDKs may have additional service-specific that can be set on the Config that is absent from SdkConfig, or slightly different settings for a specific client may be desired. The Config struct implements From<&SdkConfig>, so setting these specific settings can be done as follows:

let sdk_config = ::aws_config::load_from_env().await;
let config = aws_sdk_appmesh::config::Builder::from(&sdk_config)
    .some_service_specific_setting("value")
    .build();

See the aws-config docs and Config for more information on customizing configuration.

Note: Client construction is expensive due to connection thread pool initialization, and should be done once at application start-up.

Using the Client

A client has a function for every operation that can be performed by the service. For example, the ListTagsForResource operation has a Client::list_tags_for_resource, function which returns a builder for that operation. The fluent builder ultimately has a send() function that returns an async future that returns a result, as illustrated below:

let result = client.list_tags_for_resource()
    .resource_arn("example")
    .send()
    .await;

The underlying HTTP requests that get made by this can be modified with the customize_operation function on the fluent builder. See the customize module for more information.

Implementations

impl Client

pub fn create_gateway_route(&self) -> CreateGatewayRouteFluentBuilder

Constructs a fluent builder for the CreateGatewayRoute operation.

• The fluent builder is configurable:
  • gateway_route_name(impl ::std::convert::Into<String>) / set_gateway_route_name(Option<String>):

    The name to use for the gateway route.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the gateway route in.

  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to associate the gateway route with. If the virtual gateway is in a shared mesh, then you must be the owner of the virtual gateway resource.

  • spec(GatewayRouteSpec) / set_spec(Option<GatewayRouteSpec>):

    The gateway route specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the gateway route to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateGatewayRouteOutput with field(s):
  • gateway_route(Option<GatewayRouteData>):

    The full description of your gateway route following the create call.

• On failure, responds with SdkError<CreateGatewayRouteError>

impl Client

pub fn create_mesh(&self) -> CreateMeshFluentBuilder

Constructs a fluent builder for the CreateMesh operation.

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name to use for the service mesh.

  • spec(MeshSpec) / set_spec(Option<MeshSpec>):

    The service mesh specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the service mesh to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

• On success, responds with CreateMeshOutput with field(s):
  • mesh(Option<MeshData>):

    The full description of your service mesh following the create call.

• On failure, responds with SdkError<CreateMeshError>

impl Client

pub fn create_route(&self) -> CreateRouteFluentBuilder

Constructs a fluent builder for the CreateRoute operation.

• The fluent builder is configurable:
  • route_name(impl ::std::convert::Into<String>) / set_route_name(Option<String>):

    The name to use for the route.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the route in.

  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router in which to create the route. If the virtual router is in a shared mesh, then you must be the owner of the virtual router resource.

  • spec(RouteSpec) / set_spec(Option<RouteSpec>):

    The route specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the route to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateRouteOutput with field(s):
  • route(Option<RouteData>):

    The full description of your mesh following the create call.

• On failure, responds with SdkError<CreateRouteError>

impl Client

pub fn create_virtual_gateway(&self) -> CreateVirtualGatewayFluentBuilder

Constructs a fluent builder for the CreateVirtualGateway operation.

• The fluent builder is configurable:
  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name to use for the virtual gateway.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the virtual gateway in.

  • spec(VirtualGatewaySpec) / set_spec(Option<VirtualGatewaySpec>):

    The virtual gateway specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the virtual gateway to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateVirtualGatewayOutput with field(s):
  • virtual_gateway(Option<VirtualGatewayData>):

    The full description of your virtual gateway following the create call.

• On failure, responds with SdkError<CreateVirtualGatewayError>

impl Client

pub fn create_virtual_node(&self) -> CreateVirtualNodeFluentBuilder

Constructs a fluent builder for the CreateVirtualNode operation.

• The fluent builder is configurable:
  • virtual_node_name(impl ::std::convert::Into<String>) / set_virtual_node_name(Option<String>):

    The name to use for the virtual node.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the virtual node in.

  • spec(VirtualNodeSpec) / set_spec(Option<VirtualNodeSpec>):

    The virtual node specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the virtual node to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateVirtualNodeOutput with field(s):
  • virtual_node(Option<VirtualNodeData>):

    The full description of your virtual node following the create call.

• On failure, responds with SdkError<CreateVirtualNodeError>

impl Client

pub fn create_virtual_router(&self) -> CreateVirtualRouterFluentBuilder

Constructs a fluent builder for the CreateVirtualRouter operation.

• The fluent builder is configurable:
  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name to use for the virtual router.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the virtual router in.

  • spec(VirtualRouterSpec) / set_spec(Option<VirtualRouterSpec>):

    The virtual router specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the virtual router to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateVirtualRouterOutput with field(s):
  • virtual_router(Option<VirtualRouterData>):

    The full description of your virtual router following the create call.

• On failure, responds with SdkError<CreateVirtualRouterError>

impl Client

pub fn create_virtual_service(&self) -> CreateVirtualServiceFluentBuilder

Constructs a fluent builder for the CreateVirtualService operation.

• The fluent builder is configurable:
  • virtual_service_name(impl ::std::convert::Into<String>) / set_virtual_service_name(Option<String>):

    The name to use for the virtual service.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to create the virtual service in.

  • spec(VirtualServiceSpec) / set_spec(Option<VirtualServiceSpec>):

    The virtual service specification to apply.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    Optional metadata that you can apply to the virtual service to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with CreateVirtualServiceOutput with field(s):
  • virtual_service(Option<VirtualServiceData>):

    The full description of your virtual service following the create call.

• On failure, responds with SdkError<CreateVirtualServiceError>

impl Client

pub fn delete_gateway_route(&self) -> DeleteGatewayRouteFluentBuilder

Constructs a fluent builder for the DeleteGatewayRoute operation.

• The fluent builder is configurable:
  • gateway_route_name(impl ::std::convert::Into<String>) / set_gateway_route_name(Option<String>):

    The name of the gateway route to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the gateway route from.

  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to delete the route from.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteGatewayRouteOutput with field(s):
  • gateway_route(Option<GatewayRouteData>):

    The gateway route that was deleted.

• On failure, responds with SdkError<DeleteGatewayRouteError>

impl Client

pub fn delete_mesh(&self) -> DeleteMeshFluentBuilder

Constructs a fluent builder for the DeleteMesh operation.

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete.

• On success, responds with DeleteMeshOutput with field(s):
  • mesh(Option<MeshData>):

    The service mesh that was deleted.

• On failure, responds with SdkError<DeleteMeshError>

impl Client

pub fn delete_route(&self) -> DeleteRouteFluentBuilder

Constructs a fluent builder for the DeleteRoute operation.

• The fluent builder is configurable:
  • route_name(impl ::std::convert::Into<String>) / set_route_name(Option<String>):

    The name of the route to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the route in.

  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router to delete the route in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteRouteOutput with field(s):
  • route(Option<RouteData>):

    The route that was deleted.

• On failure, responds with SdkError<DeleteRouteError>

impl Client

pub fn delete_virtual_gateway(&self) -> DeleteVirtualGatewayFluentBuilder

Constructs a fluent builder for the DeleteVirtualGateway operation.

• The fluent builder is configurable:
  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the virtual gateway from.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteVirtualGatewayOutput with field(s):
  • virtual_gateway(Option<VirtualGatewayData>):

    The virtual gateway that was deleted.

• On failure, responds with SdkError<DeleteVirtualGatewayError>

impl Client

pub fn delete_virtual_node(&self) -> DeleteVirtualNodeFluentBuilder

Constructs a fluent builder for the DeleteVirtualNode operation.

• The fluent builder is configurable:
  • virtual_node_name(impl ::std::convert::Into<String>) / set_virtual_node_name(Option<String>):

    The name of the virtual node to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the virtual node in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteVirtualNodeOutput with field(s):
  • virtual_node(Option<VirtualNodeData>):

    The virtual node that was deleted.

• On failure, responds with SdkError<DeleteVirtualNodeError>

impl Client

pub fn delete_virtual_router(&self) -> DeleteVirtualRouterFluentBuilder

Constructs a fluent builder for the DeleteVirtualRouter operation.

• The fluent builder is configurable:
  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the virtual router in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteVirtualRouterOutput with field(s):
  • virtual_router(Option<VirtualRouterData>):

    The virtual router that was deleted.

• On failure, responds with SdkError<DeleteVirtualRouterError>

impl Client

pub fn delete_virtual_service(&self) -> DeleteVirtualServiceFluentBuilder

Constructs a fluent builder for the DeleteVirtualService operation.

• The fluent builder is configurable:
  • virtual_service_name(impl ::std::convert::Into<String>) / set_virtual_service_name(Option<String>):

    The name of the virtual service to delete.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to delete the virtual service in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DeleteVirtualServiceOutput with field(s):
  • virtual_service(Option<VirtualServiceData>):

    The virtual service that was deleted.

• On failure, responds with SdkError<DeleteVirtualServiceError>

impl Client

pub fn describe_gateway_route(&self) -> DescribeGatewayRouteFluentBuilder

Constructs a fluent builder for the DescribeGatewayRoute operation.

• The fluent builder is configurable:
  • gateway_route_name(impl ::std::convert::Into<String>) / set_gateway_route_name(Option<String>):

    The name of the gateway route to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the gateway route resides in.

  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway that the gateway route is associated with.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeGatewayRouteOutput with field(s):
  • gateway_route(Option<GatewayRouteData>):

    The full description of your gateway route.

• On failure, responds with SdkError<DescribeGatewayRouteError>

impl Client

pub fn describe_mesh(&self) -> DescribeMeshFluentBuilder

Constructs a fluent builder for the DescribeMesh operation.

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to describe.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeMeshOutput with field(s):
  • mesh(Option<MeshData>):

    The full description of your service mesh.

• On failure, responds with SdkError<DescribeMeshError>

impl Client

pub fn describe_route(&self) -> DescribeRouteFluentBuilder

Constructs a fluent builder for the DescribeRoute operation.

• The fluent builder is configurable:
  • route_name(impl ::std::convert::Into<String>) / set_route_name(Option<String>):

    The name of the route to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the route resides in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router that the route is associated with.

• On success, responds with DescribeRouteOutput with field(s):
  • route(Option<RouteData>):

    The full description of your route.

• On failure, responds with SdkError<DescribeRouteError>

impl Client

pub fn describe_virtual_gateway(&self) -> DescribeVirtualGatewayFluentBuilder

Constructs a fluent builder for the DescribeVirtualGateway operation.

• The fluent builder is configurable:
  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the gateway route resides in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeVirtualGatewayOutput with field(s):
  • virtual_gateway(Option<VirtualGatewayData>):

    The full description of your virtual gateway.

• On failure, responds with SdkError<DescribeVirtualGatewayError>

impl Client

pub fn describe_virtual_node(&self) -> DescribeVirtualNodeFluentBuilder

Constructs a fluent builder for the DescribeVirtualNode operation.

• The fluent builder is configurable:
  • virtual_node_name(impl ::std::convert::Into<String>) / set_virtual_node_name(Option<String>):

    The name of the virtual node to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual node resides in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeVirtualNodeOutput with field(s):
  • virtual_node(Option<VirtualNodeData>):

    The full description of your virtual node.

• On failure, responds with SdkError<DescribeVirtualNodeError>

impl Client

pub fn describe_virtual_router(&self) -> DescribeVirtualRouterFluentBuilder

Constructs a fluent builder for the DescribeVirtualRouter operation.

• The fluent builder is configurable:
  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual router resides in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeVirtualRouterOutput with field(s):
  • virtual_router(Option<VirtualRouterData>):

    The full description of your virtual router.

• On failure, responds with SdkError<DescribeVirtualRouterError>

impl Client

pub fn describe_virtual_service(&self) -> DescribeVirtualServiceFluentBuilder

Constructs a fluent builder for the DescribeVirtualService operation.

• The fluent builder is configurable:
  • virtual_service_name(impl ::std::convert::Into<String>) / set_virtual_service_name(Option<String>):

    The name of the virtual service to describe.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual service resides in.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with DescribeVirtualServiceOutput with field(s):
  • virtual_service(Option<VirtualServiceData>):

    The full description of your virtual service.

• On failure, responds with SdkError<DescribeVirtualServiceError>

impl Client

pub fn list_gateway_routes(&self) -> ListGatewayRoutesFluentBuilder

Constructs a fluent builder for the ListGatewayRoutes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list gateway routes in.

  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to list gateway routes in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListGatewayRoutes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListGatewayRoutes in paginated output. When you use this parameter, ListGatewayRoutes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListGatewayRoutes request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListGatewayRoutes returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListGatewayRoutesOutput with field(s):
  • gateway_routes(Option<Vec<GatewayRouteRef>>):

    The list of existing gateway routes for the specified service mesh and virtual gateway.

  • next_token(Option<String>):

    The nextToken value to include in a future ListGatewayRoutes request. When the results of a ListGatewayRoutes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListGatewayRoutesError>

impl Client

pub fn list_meshes(&self) -> ListMeshesFluentBuilder

Constructs a fluent builder for the ListMeshes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListMeshes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

    This token should be treated as an opaque identifier that is used only to retrieve the next items in a list and not for other programmatic purposes.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListMeshes in paginated output. When you use this parameter, ListMeshes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListMeshes request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListMeshes returns up to 100 results and a nextToken value if applicable.

• On success, responds with ListMeshesOutput with field(s):
  • meshes(Option<Vec<MeshRef>>):

    The list of existing service meshes.

  • next_token(Option<String>):

    The nextToken value to include in a future ListMeshes request. When the results of a ListMeshes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListMeshesError>

impl Client

pub fn list_routes(&self) -> ListRoutesFluentBuilder

Constructs a fluent builder for the ListRoutes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list routes in.

  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router to list routes in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListRoutes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListRoutes in paginated output. When you use this parameter, ListRoutes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListRoutes request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListRoutes returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListRoutesOutput with field(s):
  • routes(Option<Vec<RouteRef>>):

    The list of existing routes for the specified service mesh and virtual router.

  • next_token(Option<String>):

    The nextToken value to include in a future ListRoutes request. When the results of a ListRoutes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListRoutesError>

impl Client

pub fn list_tags_for_resource(&self) -> ListTagsForResourceFluentBuilder

Constructs a fluent builder for the ListTagsForResource operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) that identifies the resource to list the tags for.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListTagsForResource request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of tag results returned by ListTagsForResource in paginated output. When this parameter is used, ListTagsForResource returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListTagsForResource request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListTagsForResource returns up to 100 results and a nextToken value if applicable.

• On success, responds with ListTagsForResourceOutput with field(s):
  • tags(Option<Vec<TagRef>>):

    The tags for the resource.

  • next_token(Option<String>):

    The nextToken value to include in a future ListTagsForResource request. When the results of a ListTagsForResource request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListTagsForResourceError>

impl Client

pub fn list_virtual_gateways(&self) -> ListVirtualGatewaysFluentBuilder

Constructs a fluent builder for the ListVirtualGateways operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list virtual gateways in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListVirtualGateways request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListVirtualGateways in paginated output. When you use this parameter, ListVirtualGateways returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualGateways request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListVirtualGateways returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListVirtualGatewaysOutput with field(s):
  • virtual_gateways(Option<Vec<VirtualGatewayRef>>):

    The list of existing virtual gateways for the specified service mesh.

  • next_token(Option<String>):

    The nextToken value to include in a future ListVirtualGateways request. When the results of a ListVirtualGateways request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListVirtualGatewaysError>

impl Client

pub fn list_virtual_nodes(&self) -> ListVirtualNodesFluentBuilder

Constructs a fluent builder for the ListVirtualNodes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list virtual nodes in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListVirtualNodes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListVirtualNodes in paginated output. When you use this parameter, ListVirtualNodes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualNodes request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListVirtualNodes returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListVirtualNodesOutput with field(s):
  • virtual_nodes(Option<Vec<VirtualNodeRef>>):

    The list of existing virtual nodes for the specified service mesh.

  • next_token(Option<String>):

    The nextToken value to include in a future ListVirtualNodes request. When the results of a ListVirtualNodes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListVirtualNodesError>

impl Client

pub fn list_virtual_routers(&self) -> ListVirtualRoutersFluentBuilder

Constructs a fluent builder for the ListVirtualRouters operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list virtual routers in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListVirtualRouters request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListVirtualRouters in paginated output. When you use this parameter, ListVirtualRouters returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualRouters request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListVirtualRouters returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListVirtualRoutersOutput with field(s):
  • virtual_routers(Option<Vec<VirtualRouterRef>>):

    The list of existing virtual routers for the specified service mesh.

  • next_token(Option<String>):

    The nextToken value to include in a future ListVirtualRouters request. When the results of a ListVirtualRouters request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListVirtualRoutersError>

impl Client

pub fn list_virtual_services(&self) -> ListVirtualServicesFluentBuilder

Constructs a fluent builder for the ListVirtualServices operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to list virtual services in.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The nextToken value returned from a previous paginated ListVirtualServices request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

  • limit(i32) / set_limit(Option<i32>):

    The maximum number of results returned by ListVirtualServices in paginated output. When you use this parameter, ListVirtualServices returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualServices request with the returned nextToken value. This value can be between 1 and 100. If you don’t use this parameter, ListVirtualServices returns up to 100 results and a nextToken value if applicable.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with ListVirtualServicesOutput with field(s):
  • virtual_services(Option<Vec<VirtualServiceRef>>):

    The list of existing virtual services for the specified service mesh.

  • next_token(Option<String>):

    The nextToken value to include in a future ListVirtualServices request. When the results of a ListVirtualServices request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

• On failure, responds with SdkError<ListVirtualServicesError>

impl Client

pub fn tag_resource(&self) -> TagResourceFluentBuilder

Constructs a fluent builder for the TagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) of the resource to add tags to.

  • tags(Vec<TagRef>) / set_tags(Option<Vec<TagRef>>):

    The tags to add to the resource. A tag is an array of key-value pairs. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

• On success, responds with TagResourceOutput
• On failure, responds with SdkError<TagResourceError>

impl Client

pub fn untag_resource(&self) -> UntagResourceFluentBuilder

Constructs a fluent builder for the UntagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) of the resource to delete tags from.

  • tag_keys(Vec<String>) / set_tag_keys(Option<Vec<String>>):

    The keys of the tags to be removed.

• On success, responds with UntagResourceOutput
• On failure, responds with SdkError<UntagResourceError>

impl Client

pub fn update_gateway_route(&self) -> UpdateGatewayRouteFluentBuilder

Constructs a fluent builder for the UpdateGatewayRoute operation.

• The fluent builder is configurable:
  • gateway_route_name(impl ::std::convert::Into<String>) / set_gateway_route_name(Option<String>):

    The name of the gateway route to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the gateway route resides in.

  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway that the gateway route is associated with.

  • spec(GatewayRouteSpec) / set_spec(Option<GatewayRouteSpec>):

    The new gateway route specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateGatewayRouteOutput with field(s):
  • gateway_route(Option<GatewayRouteData>):

    A full description of the gateway route that was updated.

• On failure, responds with SdkError<UpdateGatewayRouteError>

impl Client

pub fn update_mesh(&self) -> UpdateMeshFluentBuilder

Constructs a fluent builder for the UpdateMesh operation.

• The fluent builder is configurable:
  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh to update.

  • spec(MeshSpec) / set_spec(Option<MeshSpec>):

    The service mesh specification to apply.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

• On success, responds with UpdateMeshOutput with field(s):
  • mesh(Option<MeshData>):

    An object that represents a service mesh returned by a describe operation.

• On failure, responds with SdkError<UpdateMeshError>

impl Client

pub fn update_route(&self) -> UpdateRouteFluentBuilder

Constructs a fluent builder for the UpdateRoute operation.

• The fluent builder is configurable:
  • route_name(impl ::std::convert::Into<String>) / set_route_name(Option<String>):

    The name of the route to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the route resides in.

  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router that the route is associated with.

  • spec(RouteSpec) / set_spec(Option<RouteSpec>):

    The new route specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateRouteOutput with field(s):
  • route(Option<RouteData>):

    A full description of the route that was updated.

• On failure, responds with SdkError<UpdateRouteError>

impl Client

pub fn update_virtual_gateway(&self) -> UpdateVirtualGatewayFluentBuilder

Constructs a fluent builder for the UpdateVirtualGateway operation.

• The fluent builder is configurable:
  • virtual_gateway_name(impl ::std::convert::Into<String>) / set_virtual_gateway_name(Option<String>):

    The name of the virtual gateway to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual gateway resides in.

  • spec(VirtualGatewaySpec) / set_spec(Option<VirtualGatewaySpec>):

    The new virtual gateway specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateVirtualGatewayOutput with field(s):
  • virtual_gateway(Option<VirtualGatewayData>):

    A full description of the virtual gateway that was updated.

• On failure, responds with SdkError<UpdateVirtualGatewayError>

impl Client

pub fn update_virtual_node(&self) -> UpdateVirtualNodeFluentBuilder

Constructs a fluent builder for the UpdateVirtualNode operation.

• The fluent builder is configurable:
  • virtual_node_name(impl ::std::convert::Into<String>) / set_virtual_node_name(Option<String>):

    The name of the virtual node to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual node resides in.

  • spec(VirtualNodeSpec) / set_spec(Option<VirtualNodeSpec>):

    The new virtual node specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateVirtualNodeOutput with field(s):
  • virtual_node(Option<VirtualNodeData>):

    A full description of the virtual node that was updated.

• On failure, responds with SdkError<UpdateVirtualNodeError>

impl Client

pub fn update_virtual_router(&self) -> UpdateVirtualRouterFluentBuilder

Constructs a fluent builder for the UpdateVirtualRouter operation.

• The fluent builder is configurable:
  • virtual_router_name(impl ::std::convert::Into<String>) / set_virtual_router_name(Option<String>):

    The name of the virtual router to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual router resides in.

  • spec(VirtualRouterSpec) / set_spec(Option<VirtualRouterSpec>):

    The new virtual router specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateVirtualRouterOutput with field(s):
  • virtual_router(Option<VirtualRouterData>):

    A full description of the virtual router that was updated.

• On failure, responds with SdkError<UpdateVirtualRouterError>

impl Client

pub fn update_virtual_service(&self) -> UpdateVirtualServiceFluentBuilder

Constructs a fluent builder for the UpdateVirtualService operation.

• The fluent builder is configurable:
  • virtual_service_name(impl ::std::convert::Into<String>) / set_virtual_service_name(Option<String>):

    The name of the virtual service to update.

  • mesh_name(impl ::std::convert::Into<String>) / set_mesh_name(Option<String>):

    The name of the service mesh that the virtual service resides in.

  • spec(VirtualServiceSpec) / set_spec(Option<VirtualServiceSpec>):

    The new virtual service specification to apply. This overwrites the existing data.

  • client_token(impl ::std::convert::Into<String>) / set_client_token(Option<String>):

    Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

  • mesh_owner(impl ::std::convert::Into<String>) / set_mesh_owner(Option<String>):

    The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it’s the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

• On success, responds with UpdateVirtualServiceOutput with field(s):
  • virtual_service(Option<VirtualServiceData>):

    A full description of the virtual service that was updated.

• On failure, responds with SdkError<UpdateVirtualServiceError>

impl Client

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Panics

• This method will panic if the conf is missing an async sleep implementation. If you experience this panic, set the sleep_impl on the Config passed into this function to fix it.
• This method will panic if the conf is missing an HTTP connector. If you experience this panic, set the http_connector on the Config passed into this function to fix it.

pub fn config(&self) -> &Config

Returns the client’s configuration.

impl Client

pub fn new(sdk_config: &SdkConfig) -> Self

Creates a new client from an SDK Config.

Panics

• This method will panic if the sdk_config is missing an async sleep implementation. If you experience this panic, set the sleep_impl on the Config passed into this function to fix it.
• This method will panic if the sdk_config is missing an HTTP connector. If you experience this panic, set the http_connector on the Config passed into this function to fix it.

Trait Implementations

impl Clone for Client

fn clone(&self) -> Client

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Client

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.