Struct aws_sdk_appmesh::input::ListGatewayRoutesInput
source · #[non_exhaustive]pub struct ListGatewayRoutesInput { /* private fields */ }
Implementations§
source§impl ListGatewayRoutesInput
impl ListGatewayRoutesInput
sourcepub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<ListGatewayRoutes, AwsResponseRetryClassifier>, BuildError>
pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<ListGatewayRoutes, AwsResponseRetryClassifier>, BuildError>
Consumes the builder and constructs an Operation<ListGatewayRoutes
>
Examples found in repository?
2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ListGatewayRoutes,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ListGatewayRoutesError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ListGatewayRoutesOutput,
aws_smithy_http::result::SdkError<crate::error::ListGatewayRoutesError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
More examples
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListGatewayRoutesOutput,
aws_smithy_http::result::SdkError<crate::error::ListGatewayRoutesError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_gateway_routes_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture ListGatewayRoutesInput
.
source§impl ListGatewayRoutesInput
impl ListGatewayRoutesInput
sourcepub fn mesh_name(&self) -> Option<&str>
pub fn mesh_name(&self) -> Option<&str>
The name of the service mesh to list gateway routes in.
sourcepub fn virtual_gateway_name(&self) -> Option<&str>
pub fn virtual_gateway_name(&self) -> Option<&str>
The name of the virtual gateway to list gateway routes in.
sourcepub fn next_token(&self) -> Option<&str>
pub fn next_token(&self) -> Option<&str>
The nextToken
value returned from a previous paginated ListGatewayRoutes
request where limit
was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken
value.
sourcepub fn limit(&self) -> Option<i32>
pub fn limit(&self) -> Option<i32>
The maximum number of results returned by ListGatewayRoutes
in paginated output. When you use this parameter, ListGatewayRoutes
returns only limit
results in a single page along with a nextToken
response element. You can see the remaining results of the initial request by sending another ListGatewayRoutes
request with the returned nextToken
value. This value can be between 1 and 100. If you don't use this parameter, ListGatewayRoutes
returns up to 100 results and a nextToken
value if applicable.
sourcepub fn mesh_owner(&self) -> Option<&str>
pub fn mesh_owner(&self) -> Option<&str>
The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.
Trait Implementations§
source§impl Clone for ListGatewayRoutesInput
impl Clone for ListGatewayRoutesInput
source§fn clone(&self) -> ListGatewayRoutesInput
fn clone(&self) -> ListGatewayRoutesInput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more