Struct aws_sdk_appflow::operation::describe_flow::DescribeFlowOutput

#[non_exhaustive]
pub struct DescribeFlowOutput {

    pub flow_arn: Option<String>,
    pub description: Option<String>,
    pub flow_name: Option<String>,
    pub kms_arn: Option<String>,
    pub flow_status: Option<FlowStatus>,
    pub flow_status_message: Option<String>,
    pub source_flow_config: Option<SourceFlowConfig>,
    pub destination_flow_config_list: Option<Vec<DestinationFlowConfig>>,
    pub last_run_execution_details: Option<ExecutionDetails>,
    pub trigger_config: Option<TriggerConfig>,
    pub tasks: Option<Vec<Task>>,
    pub created_at: Option<DateTime>,
    pub last_updated_at: Option<DateTime>,
    pub created_by: Option<String>,
    pub last_updated_by: Option<String>,
    pub tags: Option<HashMap<String, String>>,
    pub metadata_catalog_config: Option<MetadataCatalogConfig>,
    pub last_run_metadata_catalog_details: Option<Vec<MetadataCatalogDetail>>,
    pub schema_version: Option<i64>,
    /* private fields */
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

flow_arn: Option<String>

The flow's Amazon Resource Name (ARN).

description: Option<String>

A description of the flow.

flow_name: Option<String>

The specified name of the flow. Spaces are not allowed. Use underscores (_) or hyphens (-) only.

kms_arn: Option<String>

The ARN (Amazon Resource Name) of the Key Management Service (KMS) key you provide for encryption. This is required if you do not want to use the Amazon AppFlow-managed KMS key. If you don't provide anything here, Amazon AppFlow uses the Amazon AppFlow-managed KMS key.

flow_status: Option<FlowStatus>

Indicates the current status of the flow.

flow_status_message: Option<String>

Contains an error message if the flow status is in a suspended or error state. This applies only to scheduled or event-triggered flows.

source_flow_config: Option<SourceFlowConfig>

The configuration that controls how Amazon AppFlow retrieves data from the source connector.

destination_flow_config_list: Option<Vec<DestinationFlowConfig>>

The configuration that controls how Amazon AppFlow transfers data to the destination connector.

last_run_execution_details: Option<ExecutionDetails>

Describes the details of the most recent flow run.

trigger_config: Option<TriggerConfig>

The trigger settings that determine how and when the flow runs.

tasks: Option<Vec<Task>>

A list of tasks that Amazon AppFlow performs while transferring the data in the flow run.

created_at: Option<DateTime>

Specifies when the flow was created.

last_updated_at: Option<DateTime>

Specifies when the flow was last updated.

created_by: Option<String>

The ARN of the user who created the flow.

last_updated_by: Option<String>

Specifies the user name of the account that performed the most recent update.

tags: Option<HashMap<String, String>>

The tags used to organize, track, or control access for your flow.

metadata_catalog_config: Option<MetadataCatalogConfig>

Specifies the configuration that Amazon AppFlow uses when it catalogs the data that's transferred by the associated flow. When Amazon AppFlow catalogs the data from a flow, it stores metadata in a data catalog.

last_run_metadata_catalog_details: Option<Vec<MetadataCatalogDetail>>

Describes the metadata catalog, metadata table, and data partitions that Amazon AppFlow used for the associated flow run.

schema_version: Option<i64>

The version number of your data schema. Amazon AppFlow assigns this version number. The version number increases by one when you change any of the following settings in your flow configuration:

• Source-to-destination field mappings

• Field data types

• Partition keys

Implementations

impl DescribeFlowOutput

pub fn flow_arn(&self) -> Option<&str>

The flow's Amazon Resource Name (ARN).

pub fn description(&self) -> Option<&str>

A description of the flow.

pub fn flow_name(&self) -> Option<&str>

The specified name of the flow. Spaces are not allowed. Use underscores (_) or hyphens (-) only.

pub fn kms_arn(&self) -> Option<&str>

The ARN (Amazon Resource Name) of the Key Management Service (KMS) key you provide for encryption. This is required if you do not want to use the Amazon AppFlow-managed KMS key. If you don't provide anything here, Amazon AppFlow uses the Amazon AppFlow-managed KMS key.

pub fn flow_status(&self) -> Option<&FlowStatus>

Indicates the current status of the flow.

pub fn flow_status_message(&self) -> Option<&str>

Contains an error message if the flow status is in a suspended or error state. This applies only to scheduled or event-triggered flows.

pub fn source_flow_config(&self) -> Option<&SourceFlowConfig>

The configuration that controls how Amazon AppFlow retrieves data from the source connector.

pub fn destination_flow_config_list(&self) -> &[DestinationFlowConfig]

The configuration that controls how Amazon AppFlow transfers data to the destination connector.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .destination_flow_config_list.is_none().

pub fn last_run_execution_details(&self) -> Option<&ExecutionDetails>

Describes the details of the most recent flow run.

pub fn trigger_config(&self) -> Option<&TriggerConfig>

The trigger settings that determine how and when the flow runs.

pub fn tasks(&self) -> &[Task]

A list of tasks that Amazon AppFlow performs while transferring the data in the flow run.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tasks.is_none().

pub fn created_at(&self) -> Option<&DateTime>

Specifies when the flow was created.

pub fn last_updated_at(&self) -> Option<&DateTime>

Specifies when the flow was last updated.

pub fn created_by(&self) -> Option<&str>

The ARN of the user who created the flow.

pub fn last_updated_by(&self) -> Option<&str>

Specifies the user name of the account that performed the most recent update.

pub fn tags(&self) -> Option<&HashMap<String, String>>

The tags used to organize, track, or control access for your flow.

pub fn metadata_catalog_config(&self) -> Option<&MetadataCatalogConfig>

Specifies the configuration that Amazon AppFlow uses when it catalogs the data that's transferred by the associated flow. When Amazon AppFlow catalogs the data from a flow, it stores metadata in a data catalog.

pub fn last_run_metadata_catalog_details(&self) -> &[MetadataCatalogDetail]

Describes the metadata catalog, metadata table, and data partitions that Amazon AppFlow used for the associated flow run.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .last_run_metadata_catalog_details.is_none().

pub fn schema_version(&self) -> Option<i64>

The version number of your data schema. Amazon AppFlow assigns this version number. The version number increases by one when you change any of the following settings in your flow configuration:

• Source-to-destination field mappings

• Field data types

• Partition keys

impl DescribeFlowOutput

pub fn builder() -> DescribeFlowOutputBuilder

Creates a new builder-style object to manufacture DescribeFlowOutput.

Trait Implementations

impl Clone for DescribeFlowOutput

fn clone(&self) -> DescribeFlowOutput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeFlowOutput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for DescribeFlowOutput

fn eq(&self, other: &DescribeFlowOutput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RequestId for DescribeFlowOutput

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

impl StructuralPartialEq for DescribeFlowOutput