#[non_exhaustive]pub struct CreateAuthorizerOutputBuilder { /* private fields */ }Expand description
A builder for CreateAuthorizerOutput.
Implementations§
Source§impl CreateAuthorizerOutputBuilder
impl CreateAuthorizerOutputBuilder
Specifies the required credentials as an IAM role for API Gateway to invoke the authorizer. To specify an IAM role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To use resource-based permissions on the Lambda function, don't specify this parameter. Supported only for REQUEST authorizers.
Specifies the required credentials as an IAM role for API Gateway to invoke the authorizer. To specify an IAM role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To use resource-based permissions on the Lambda function, don't specify this parameter. Supported only for REQUEST authorizers.
Specifies the required credentials as an IAM role for API Gateway to invoke the authorizer. To specify an IAM role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To use resource-based permissions on the Lambda function, don't specify this parameter. Supported only for REQUEST authorizers.
The authorizer identifier.
The authorizer identifier.
The authorizer identifier.
Specifies the format of the payload sent to an HTTP API Lambda authorizer. Required for HTTP API Lambda authorizers. Supported values are 1.0 and 2.0. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
Specifies the format of the payload sent to an HTTP API Lambda authorizer. Required for HTTP API Lambda authorizers. Supported values are 1.0 and 2.0. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
Specifies the format of the payload sent to an HTTP API Lambda authorizer. Required for HTTP API Lambda authorizers. Supported values are 1.0 and 2.0. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
The time to live (TTL) for cached authorizer results, in seconds. If it equals 0, authorization caching is disabled. If it is greater than 0, API Gateway caches authorizer responses. The maximum value is 3600, or 1 hour. Supported only for HTTP API Lambda authorizers.
The time to live (TTL) for cached authorizer results, in seconds. If it equals 0, authorization caching is disabled. If it is greater than 0, API Gateway caches authorizer responses. The maximum value is 3600, or 1 hour. Supported only for HTTP API Lambda authorizers.
The time to live (TTL) for cached authorizer results, in seconds. If it equals 0, authorization caching is disabled. If it is greater than 0, API Gateway caches authorizer responses. The maximum value is 3600, or 1 hour. Supported only for HTTP API Lambda authorizers.
The authorizer type. Specify REQUEST for a Lambda function using incoming request parameters. Specify JWT to use JSON Web Tokens (supported only for HTTP APIs).
The authorizer type. Specify REQUEST for a Lambda function using incoming request parameters. Specify JWT to use JSON Web Tokens (supported only for HTTP APIs).
The authorizer type. Specify REQUEST for a Lambda function using incoming request parameters. Specify JWT to use JSON Web Tokens (supported only for HTTP APIs).
The authorizer's Uniform Resource Identifier (URI). For REQUEST authorizers, this must be a well-formed Lambda function URI, for example, arn:aws:apigateway:us-west-2:lambda:path/2015-03-31/functions/arn:aws:lambda:us-west-2:{account_id}:function:{lambda_function_name}/invocations. In general, the URI has this form: arn:aws:apigateway:{region}:lambda:path/{service_api} , where {region} is the same as the region hosting the Lambda function, path indicates that the remaining substring in the URI should be treated as the path to the resource, including the initial /. For Lambda functions, this is usually of the form /2015-03-31/functions/\[FunctionARN\]/invocations. Supported only for REQUEST authorizers.
The authorizer's Uniform Resource Identifier (URI). For REQUEST authorizers, this must be a well-formed Lambda function URI, for example, arn:aws:apigateway:us-west-2:lambda:path/2015-03-31/functions/arn:aws:lambda:us-west-2:{account_id}:function:{lambda_function_name}/invocations. In general, the URI has this form: arn:aws:apigateway:{region}:lambda:path/{service_api} , where {region} is the same as the region hosting the Lambda function, path indicates that the remaining substring in the URI should be treated as the path to the resource, including the initial /. For Lambda functions, this is usually of the form /2015-03-31/functions/\[FunctionARN\]/invocations. Supported only for REQUEST authorizers.
The authorizer's Uniform Resource Identifier (URI). For REQUEST authorizers, this must be a well-formed Lambda function URI, for example, arn:aws:apigateway:us-west-2:lambda:path/2015-03-31/functions/arn:aws:lambda:us-west-2:{account_id}:function:{lambda_function_name}/invocations. In general, the URI has this form: arn:aws:apigateway:{region}:lambda:path/{service_api} , where {region} is the same as the region hosting the Lambda function, path indicates that the remaining substring in the URI should be treated as the path to the resource, including the initial /. For Lambda functions, this is usually of the form /2015-03-31/functions/\[FunctionARN\]/invocations. Supported only for REQUEST authorizers.
Sourcepub fn enable_simple_responses(self, input: bool) -> Self
pub fn enable_simple_responses(self, input: bool) -> Self
Specifies whether a Lambda authorizer returns a response in a simple format. If enabled, the Lambda authorizer can return a boolean value instead of an IAM policy. Supported only for HTTP APIs. To learn more, see Working with AWS Lambda authorizers for HTTP APIs
Sourcepub fn set_enable_simple_responses(self, input: Option<bool>) -> Self
pub fn set_enable_simple_responses(self, input: Option<bool>) -> Self
Specifies whether a Lambda authorizer returns a response in a simple format. If enabled, the Lambda authorizer can return a boolean value instead of an IAM policy. Supported only for HTTP APIs. To learn more, see Working with AWS Lambda authorizers for HTTP APIs
Sourcepub fn get_enable_simple_responses(&self) -> &Option<bool>
pub fn get_enable_simple_responses(&self) -> &Option<bool>
Specifies whether a Lambda authorizer returns a response in a simple format. If enabled, the Lambda authorizer can return a boolean value instead of an IAM policy. Supported only for HTTP APIs. To learn more, see Working with AWS Lambda authorizers for HTTP APIs
Sourcepub fn identity_source(self, input: impl Into<String>) -> Self
pub fn identity_source(self, input: impl Into<String>) -> Self
Appends an item to identity_source.
To override the contents of this collection use set_identity_source.
The identity source for which authorization is requested.
For a REQUEST authorizer, this is optional. The value is a set of one or more mapping expressions of the specified request parameters. The identity source can be headers, query string parameters, stage variables, and context parameters. For example, if an Auth header and a Name query string parameter are defined as identity sources, this value is route.request.header.Auth, route.request.querystring.Name for WebSocket APIs. For HTTP APIs, use selection expressions prefixed with $, for example, $request.header.Auth, $request.querystring.Name. These parameters are used to perform runtime validation for Lambda-based authorizers by verifying all of the identity-related request parameters are present in the request, not null, and non-empty. Only when this is true does the authorizer invoke the authorizer Lambda function. Otherwise, it returns a 401 Unauthorized response without calling the Lambda function. For HTTP APIs, identity sources are also used as the cache key when caching is enabled. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
For JWT, a single entry that specifies where to extract the JSON Web Token (JWT) from inbound requests. Currently only header-based and query parameter-based selections are supported, for example $request.header.Authorization.
Sourcepub fn set_identity_source(self, input: Option<Vec<String>>) -> Self
pub fn set_identity_source(self, input: Option<Vec<String>>) -> Self
The identity source for which authorization is requested.
For a REQUEST authorizer, this is optional. The value is a set of one or more mapping expressions of the specified request parameters. The identity source can be headers, query string parameters, stage variables, and context parameters. For example, if an Auth header and a Name query string parameter are defined as identity sources, this value is route.request.header.Auth, route.request.querystring.Name for WebSocket APIs. For HTTP APIs, use selection expressions prefixed with $, for example, $request.header.Auth, $request.querystring.Name. These parameters are used to perform runtime validation for Lambda-based authorizers by verifying all of the identity-related request parameters are present in the request, not null, and non-empty. Only when this is true does the authorizer invoke the authorizer Lambda function. Otherwise, it returns a 401 Unauthorized response without calling the Lambda function. For HTTP APIs, identity sources are also used as the cache key when caching is enabled. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
For JWT, a single entry that specifies where to extract the JSON Web Token (JWT) from inbound requests. Currently only header-based and query parameter-based selections are supported, for example $request.header.Authorization.
Sourcepub fn get_identity_source(&self) -> &Option<Vec<String>>
pub fn get_identity_source(&self) -> &Option<Vec<String>>
The identity source for which authorization is requested.
For a REQUEST authorizer, this is optional. The value is a set of one or more mapping expressions of the specified request parameters. The identity source can be headers, query string parameters, stage variables, and context parameters. For example, if an Auth header and a Name query string parameter are defined as identity sources, this value is route.request.header.Auth, route.request.querystring.Name for WebSocket APIs. For HTTP APIs, use selection expressions prefixed with $, for example, $request.header.Auth, $request.querystring.Name. These parameters are used to perform runtime validation for Lambda-based authorizers by verifying all of the identity-related request parameters are present in the request, not null, and non-empty. Only when this is true does the authorizer invoke the authorizer Lambda function. Otherwise, it returns a 401 Unauthorized response without calling the Lambda function. For HTTP APIs, identity sources are also used as the cache key when caching is enabled. To learn more, see Working with AWS Lambda authorizers for HTTP APIs.
For JWT, a single entry that specifies where to extract the JSON Web Token (JWT) from inbound requests. Currently only header-based and query parameter-based selections are supported, for example $request.header.Authorization.
Sourcepub fn identity_validation_expression(self, input: impl Into<String>) -> Self
pub fn identity_validation_expression(self, input: impl Into<String>) -> Self
The validation expression does not apply to the REQUEST authorizer.
Sourcepub fn set_identity_validation_expression(self, input: Option<String>) -> Self
pub fn set_identity_validation_expression(self, input: Option<String>) -> Self
The validation expression does not apply to the REQUEST authorizer.
Sourcepub fn get_identity_validation_expression(&self) -> &Option<String>
pub fn get_identity_validation_expression(&self) -> &Option<String>
The validation expression does not apply to the REQUEST authorizer.
Sourcepub fn jwt_configuration(self, input: JwtConfiguration) -> Self
pub fn jwt_configuration(self, input: JwtConfiguration) -> Self
Represents the configuration of a JWT authorizer. Required for the JWT authorizer type. Supported only for HTTP APIs.
Sourcepub fn set_jwt_configuration(self, input: Option<JwtConfiguration>) -> Self
pub fn set_jwt_configuration(self, input: Option<JwtConfiguration>) -> Self
Represents the configuration of a JWT authorizer. Required for the JWT authorizer type. Supported only for HTTP APIs.
Sourcepub fn get_jwt_configuration(&self) -> &Option<JwtConfiguration>
pub fn get_jwt_configuration(&self) -> &Option<JwtConfiguration>
Represents the configuration of a JWT authorizer. Required for the JWT authorizer type. Supported only for HTTP APIs.
Sourcepub fn build(self) -> CreateAuthorizerOutput
pub fn build(self) -> CreateAuthorizerOutput
Consumes the builder and constructs a CreateAuthorizerOutput.
Trait Implementations§
Source§impl Clone for CreateAuthorizerOutputBuilder
impl Clone for CreateAuthorizerOutputBuilder
Source§fn clone(&self) -> CreateAuthorizerOutputBuilder
fn clone(&self) -> CreateAuthorizerOutputBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Default for CreateAuthorizerOutputBuilder
impl Default for CreateAuthorizerOutputBuilder
Source§fn default() -> CreateAuthorizerOutputBuilder
fn default() -> CreateAuthorizerOutputBuilder
Source§impl PartialEq for CreateAuthorizerOutputBuilder
impl PartialEq for CreateAuthorizerOutputBuilder
Source§fn eq(&self, other: &CreateAuthorizerOutputBuilder) -> bool
fn eq(&self, other: &CreateAuthorizerOutputBuilder) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for CreateAuthorizerOutputBuilder
Auto Trait Implementations§
impl Freeze for CreateAuthorizerOutputBuilder
impl RefUnwindSafe for CreateAuthorizerOutputBuilder
impl Send for CreateAuthorizerOutputBuilder
impl Sync for CreateAuthorizerOutputBuilder
impl Unpin for CreateAuthorizerOutputBuilder
impl UnwindSafe for CreateAuthorizerOutputBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);