Struct Integration

#[non_exhaustive]
pub struct Integration {

    pub type: Option<IntegrationType>,
    pub http_method: Option<String>,
    pub uri: Option<String>,
    pub connection_type: Option<ConnectionType>,
    pub connection_id: Option<String>,
    pub credentials: Option<String>,
    pub request_parameters: Option<HashMap<String, String>>,
    pub request_templates: Option<HashMap<String, String>>,
    pub passthrough_behavior: Option<String>,
    pub content_handling: Option<ContentHandlingStrategy>,
    pub timeout_in_millis: i32,
    pub cache_namespace: Option<String>,
    pub cache_key_parameters: Option<Vec<String>>,
    pub integration_responses: Option<HashMap<String, IntegrationResponse>>,
    pub tls_config: Option<TlsConfig>,
}

Represents an HTTP, HTTP_PROXY, AWS, AWS_PROXY, or Mock integration.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

type: Option<IntegrationType>

Specifies an API method integration type. The valid value is one of the following:

For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

http_method: Option<String>

Specifies the integration's HTTP method type. For the Type property, if you specify MOCK, this property is optional. For Lambda integrations, you must set the integration method to POST. For all other types, you must specify this property.

uri: Option<String>

Specifies Uniform Resource Identifier (URI) of the integration endpoint.

For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification for standard integrations. If connectionType is VPC_LINK specify the Network Load Balancer DNS name. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an Amazon Web Services service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

connection_type: Option<ConnectionType>

The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

connection_id: Option<String>

The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

credentials: Option<String>

Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported Amazon Web Services services, specify null.

request_parameters: Option<HashMap<String, String>>

A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

request_templates: Option<HashMap<String, String>>

Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

passthrough_behavior: Option<String>

Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

content_handling: Option<ContentHandlingStrategy>

Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

timeout_in_millis: i32

Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds. You can increase the default value to longer than 29 seconds for Regional or private APIs only.

cache_namespace: Option<String>

Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

cache_key_parameters: Option<Vec<String>>

A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

integration_responses: Option<HashMap<String, IntegrationResponse>>

Specifies the integration's responses.

tls_config: Option<TlsConfig>

Specifies the TLS configuration for an integration.

Implementations

impl Integration

pub fn type(&self) -> Option<&IntegrationType>

Specifies an API method integration type. The valid value is one of the following:

For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

pub fn http_method(&self) -> Option<&str>

Specifies the integration's HTTP method type. For the Type property, if you specify MOCK, this property is optional. For Lambda integrations, you must set the integration method to POST. For all other types, you must specify this property.

pub fn uri(&self) -> Option<&str>

Specifies Uniform Resource Identifier (URI) of the integration endpoint.

For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification for standard integrations. If connectionType is VPC_LINK specify the Network Load Balancer DNS name. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an Amazon Web Services service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

pub fn connection_type(&self) -> Option<&ConnectionType>

The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

pub fn connection_id(&self) -> Option<&str>

The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

pub fn credentials(&self) -> Option<&str>

Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported Amazon Web Services services, specify null.

pub fn request_parameters(&self) -> Option<&HashMap<String, String>>

A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

pub fn request_templates(&self) -> Option<&HashMap<String, String>>

Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

pub fn passthrough_behavior(&self) -> Option<&str>

Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

pub fn content_handling(&self) -> Option<&ContentHandlingStrategy>

Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

pub fn timeout_in_millis(&self) -> i32

Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds. You can increase the default value to longer than 29 seconds for Regional or private APIs only.

pub fn cache_namespace(&self) -> Option<&str>

Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

pub fn cache_key_parameters(&self) -> &[String]

A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .cache_key_parameters.is_none().

pub fn integration_responses( &self, ) -> Option<&HashMap<String, IntegrationResponse>>

Specifies the integration's responses.

pub fn tls_config(&self) -> Option<&TlsConfig>

Specifies the TLS configuration for an integration.

impl Integration

pub fn builder() -> IntegrationBuilder

Creates a new builder-style object to manufacture Integration.

Trait Implementations

impl Clone for Integration

fn clone(&self) -> Integration

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Integration

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for Integration

fn eq(&self, other: &Integration) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for Integration