Struct aws_sdk_apigateway::operation::update_integration::builders::UpdateIntegrationOutputBuilder

#[non_exhaustive]
pub struct UpdateIntegrationOutputBuilder { /* private fields */ }

A builder for UpdateIntegrationOutput.

Implementations

impl UpdateIntegrationOutputBuilder

pub fn type(self, input: IntegrationType) -> Self

Specifies an API method integration type. The valid value is one of the following:

For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

pub fn set_type(self, input: Option<IntegrationType>) -> Self

Specifies an API method integration type. The valid value is one of the following:

For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

pub fn get_type(&self) -> &Option<IntegrationType>

Specifies an API method integration type. The valid value is one of the following:

For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

pub fn http_method(self, input: impl Into<String>) -> Self

Specifies the integration's HTTP method type.

pub fn set_http_method(self, input: Option<String>) -> Self

Specifies the integration's HTTP method type.

pub fn get_http_method(&self) -> &Option<String>

Specifies the integration's HTTP method type.

pub fn uri(self, input: impl Into<String>) -> Self

Specifies Uniform Resource Identifier (URI) of the integration endpoint.

For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where connectionType is not VPC_LINK, or private integration, where connectionType is VPC_LINK. For a private HTTP integration, the URI is not used for routing. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

pub fn set_uri(self, input: Option<String>) -> Self

Specifies Uniform Resource Identifier (URI) of the integration endpoint.

For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where connectionType is not VPC_LINK, or private integration, where connectionType is VPC_LINK. For a private HTTP integration, the URI is not used for routing. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

pub fn get_uri(&self) -> &Option<String>

Specifies Uniform Resource Identifier (URI) of the integration endpoint.

For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification, for either standard integration, where connectionType is not VPC_LINK, or private integration, where connectionType is VPC_LINK. For a private HTTP integration, the URI is not used for routing. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an AWS service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

pub fn connection_type(self, input: ConnectionType) -> Self

The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

pub fn set_connection_type(self, input: Option<ConnectionType>) -> Self

The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

pub fn get_connection_type(&self) -> &Option<ConnectionType>

The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

pub fn connection_id(self, input: impl Into<String>) -> Self

The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

pub fn set_connection_id(self, input: Option<String>) -> Self

The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

pub fn get_connection_id(&self) -> &Option<String>

The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

pub fn credentials(self, input: impl Into<String>) -> Self

Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported AWS services, specify null.

pub fn set_credentials(self, input: Option<String>) -> Self

Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported AWS services, specify null.

pub fn get_credentials(&self) -> &Option<String>

Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported AWS services, specify null.

pub fn request_parameters( self, k: impl Into<String>, v: impl Into<String> ) -> Self

Adds a key-value pair to request_parameters.

To override the contents of this collection use set_request_parameters.

A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

pub fn set_request_parameters( self, input: Option<HashMap<String, String>> ) -> Self

A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

pub fn get_request_parameters(&self) -> &Option<HashMap<String, String>>

A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

pub fn request_templates( self, k: impl Into<String>, v: impl Into<String> ) -> Self

Adds a key-value pair to request_templates.

To override the contents of this collection use set_request_templates.

Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

pub fn set_request_templates( self, input: Option<HashMap<String, String>> ) -> Self

Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

pub fn get_request_templates(&self) -> &Option<HashMap<String, String>>

Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

pub fn passthrough_behavior(self, input: impl Into<String>) -> Self

Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

pub fn set_passthrough_behavior(self, input: Option<String>) -> Self

Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

pub fn get_passthrough_behavior(&self) -> &Option<String>

Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

pub fn content_handling(self, input: ContentHandlingStrategy) -> Self

Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

pub fn set_content_handling( self, input: Option<ContentHandlingStrategy> ) -> Self

Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

pub fn get_content_handling(&self) -> &Option<ContentHandlingStrategy>

Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

pub fn timeout_in_millis(self, input: i32) -> Self

Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.

pub fn set_timeout_in_millis(self, input: Option<i32>) -> Self

Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.

pub fn get_timeout_in_millis(&self) -> &Option<i32>

Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.

pub fn cache_namespace(self, input: impl Into<String>) -> Self

Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

pub fn set_cache_namespace(self, input: Option<String>) -> Self

Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

pub fn get_cache_namespace(&self) -> &Option<String>

Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

pub fn cache_key_parameters(self, input: impl Into<String>) -> Self

Appends an item to cache_key_parameters.

To override the contents of this collection use set_cache_key_parameters.

A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

pub fn set_cache_key_parameters(self, input: Option<Vec<String>>) -> Self

A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

pub fn get_cache_key_parameters(&self) -> &Option<Vec<String>>

A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

pub fn integration_responses( self, k: impl Into<String>, v: IntegrationResponse ) -> Self

Adds a key-value pair to integration_responses.

To override the contents of this collection use set_integration_responses.

Specifies the integration's responses.

pub fn set_integration_responses( self, input: Option<HashMap<String, IntegrationResponse>> ) -> Self

Specifies the integration's responses.

pub fn get_integration_responses( &self ) -> &Option<HashMap<String, IntegrationResponse>>

Specifies the integration's responses.

pub fn tls_config(self, input: TlsConfig) -> Self

Specifies the TLS configuration for an integration.

pub fn set_tls_config(self, input: Option<TlsConfig>) -> Self

Specifies the TLS configuration for an integration.

pub fn get_tls_config(&self) -> &Option<TlsConfig>

Specifies the TLS configuration for an integration.

pub fn build(self) -> UpdateIntegrationOutput

Consumes the builder and constructs a UpdateIntegrationOutput.

Trait Implementations

impl Clone for UpdateIntegrationOutputBuilder

fn clone(&self) -> UpdateIntegrationOutputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateIntegrationOutputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for UpdateIntegrationOutputBuilder

fn default() -> UpdateIntegrationOutputBuilder

Returns the “default value” for a type.

impl PartialEq<UpdateIntegrationOutputBuilder> for UpdateIntegrationOutputBuilder

fn eq(&self, other: &UpdateIntegrationOutputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for UpdateIntegrationOutputBuilder