Struct aws_sdk_amplifybackend::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for AmplifyBackend.

This client allows ergonomic access to a AmplifyBackend-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn clone_backend(&self) -> CloneBackend<C, M, R>

Constructs a fluent builder for the CloneBackend operation.

See CloneBackend for more information about the operation and its arguments.

pub fn create_backend(&self) -> CreateBackend<C, M, R>

Constructs a fluent builder for the CreateBackend operation.

See CreateBackend for more information about the operation and its arguments.

pub fn create_backend_api(&self) -> CreateBackendAPI<C, M, R>

Constructs a fluent builder for the CreateBackendAPI operation.

See CreateBackendAPI for more information about the operation and its arguments.

pub fn create_backend_auth(&self) -> CreateBackendAuth<C, M, R>

Constructs a fluent builder for the CreateBackendAuth operation.

See CreateBackendAuth for more information about the operation and its arguments.

pub fn create_backend_config(&self) -> CreateBackendConfig<C, M, R>

Constructs a fluent builder for the CreateBackendConfig operation.

See CreateBackendConfig for more information about the operation and its arguments.

pub fn create_backend_storage(&self) -> CreateBackendStorage<C, M, R>

Constructs a fluent builder for the CreateBackendStorage operation.

See CreateBackendStorage for more information about the operation and its arguments.

pub fn create_token(&self) -> CreateToken<C, M, R>

Constructs a fluent builder for the CreateToken operation.

See CreateToken for more information about the operation and its arguments.

pub fn delete_backend(&self) -> DeleteBackend<C, M, R>

Constructs a fluent builder for the DeleteBackend operation.

See DeleteBackend for more information about the operation and its arguments.

pub fn delete_backend_api(&self) -> DeleteBackendAPI<C, M, R>

Constructs a fluent builder for the DeleteBackendAPI operation.

See DeleteBackendAPI for more information about the operation and its arguments.

pub fn delete_backend_auth(&self) -> DeleteBackendAuth<C, M, R>

Constructs a fluent builder for the DeleteBackendAuth operation.

See DeleteBackendAuth for more information about the operation and its arguments.

pub fn delete_backend_storage(&self) -> DeleteBackendStorage<C, M, R>

Constructs a fluent builder for the DeleteBackendStorage operation.

See DeleteBackendStorage for more information about the operation and its arguments.

pub fn delete_token(&self) -> DeleteToken<C, M, R>

Constructs a fluent builder for the DeleteToken operation.

See DeleteToken for more information about the operation and its arguments.

pub fn generate_backend_api_models(&self) -> GenerateBackendAPIModels<C, M, R>

Constructs a fluent builder for the GenerateBackendAPIModels operation.

See GenerateBackendAPIModels for more information about the operation and its arguments.

pub fn get_backend(&self) -> GetBackend<C, M, R>

Constructs a fluent builder for the GetBackend operation.

See GetBackend for more information about the operation and its arguments.

pub fn get_backend_api(&self) -> GetBackendAPI<C, M, R>

Constructs a fluent builder for the GetBackendAPI operation.

See GetBackendAPI for more information about the operation and its arguments.

pub fn get_backend_api_models(&self) -> GetBackendAPIModels<C, M, R>

Constructs a fluent builder for the GetBackendAPIModels operation.

See GetBackendAPIModels for more information about the operation and its arguments.

pub fn get_backend_auth(&self) -> GetBackendAuth<C, M, R>

Constructs a fluent builder for the GetBackendAuth operation.

See GetBackendAuth for more information about the operation and its arguments.

pub fn get_backend_job(&self) -> GetBackendJob<C, M, R>

Constructs a fluent builder for the GetBackendJob operation.

See GetBackendJob for more information about the operation and its arguments.

pub fn get_backend_storage(&self) -> GetBackendStorage<C, M, R>

Constructs a fluent builder for the GetBackendStorage operation.

See GetBackendStorage for more information about the operation and its arguments.

pub fn get_token(&self) -> GetToken<C, M, R>

Constructs a fluent builder for the GetToken operation.

See GetToken for more information about the operation and its arguments.

pub fn import_backend_auth(&self) -> ImportBackendAuth<C, M, R>

Constructs a fluent builder for the ImportBackendAuth operation.

See ImportBackendAuth for more information about the operation and its arguments.

pub fn import_backend_storage(&self) -> ImportBackendStorage<C, M, R>

Constructs a fluent builder for the ImportBackendStorage operation.

See ImportBackendStorage for more information about the operation and its arguments.

pub fn list_backend_jobs(&self) -> ListBackendJobs<C, M, R>

Constructs a fluent builder for the ListBackendJobs operation.

See ListBackendJobs for more information about the operation and its arguments.

pub fn list_s3_buckets(&self) -> ListS3Buckets<C, M, R>

Constructs a fluent builder for the ListS3Buckets operation.

See ListS3Buckets for more information about the operation and its arguments.

pub fn remove_all_backends(&self) -> RemoveAllBackends<C, M, R>

Constructs a fluent builder for the RemoveAllBackends operation.

See RemoveAllBackends for more information about the operation and its arguments.

pub fn remove_backend_config(&self) -> RemoveBackendConfig<C, M, R>

Constructs a fluent builder for the RemoveBackendConfig operation.

See RemoveBackendConfig for more information about the operation and its arguments.

pub fn update_backend_api(&self) -> UpdateBackendAPI<C, M, R>

Constructs a fluent builder for the UpdateBackendAPI operation.

See UpdateBackendAPI for more information about the operation and its arguments.

pub fn update_backend_auth(&self) -> UpdateBackendAuth<C, M, R>

Constructs a fluent builder for the UpdateBackendAuth operation.

See UpdateBackendAuth for more information about the operation and its arguments.

pub fn update_backend_config(&self) -> UpdateBackendConfig<C, M, R>

Constructs a fluent builder for the UpdateBackendConfig operation.

See UpdateBackendConfig for more information about the operation and its arguments.

pub fn update_backend_job(&self) -> UpdateBackendJob<C, M, R>

Constructs a fluent builder for the UpdateBackendJob operation.

See UpdateBackendJob for more information about the operation and its arguments.

pub fn update_backend_storage(&self) -> UpdateBackendStorage<C, M, R>

Constructs a fluent builder for the UpdateBackendStorage operation.

See UpdateBackendStorage for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.