[−][src]Struct atsams70j20b::usbhs::usbhs_hstisr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn dconni(&self) -> DCONNI_R
[src]
Bit 0 - Device Connection Interrupt
pub fn ddisci(&self) -> DDISCI_R
[src]
Bit 1 - Device Disconnection Interrupt
pub fn rsti(&self) -> RSTI_R
[src]
Bit 2 - USB Reset Sent Interrupt
pub fn rsmedi(&self) -> RSMEDI_R
[src]
Bit 3 - Downstream Resume Sent Interrupt
pub fn rxrsmi(&self) -> RXRSMI_R
[src]
Bit 4 - Upstream Resume Received Interrupt
pub fn hsofi(&self) -> HSOFI_R
[src]
Bit 5 - Host Start of Frame Interrupt
pub fn hwupi(&self) -> HWUPI_R
[src]
Bit 6 - Host Wake-Up Interrupt
pub fn pep_0(&self) -> PEP_0_R
[src]
Bit 8 - Pipe 0 Interrupt
pub fn pep_1(&self) -> PEP_1_R
[src]
Bit 9 - Pipe 1 Interrupt
pub fn pep_2(&self) -> PEP_2_R
[src]
Bit 10 - Pipe 2 Interrupt
pub fn pep_3(&self) -> PEP_3_R
[src]
Bit 11 - Pipe 3 Interrupt
pub fn pep_4(&self) -> PEP_4_R
[src]
Bit 12 - Pipe 4 Interrupt
pub fn pep_5(&self) -> PEP_5_R
[src]
Bit 13 - Pipe 5 Interrupt
pub fn pep_6(&self) -> PEP_6_R
[src]
Bit 14 - Pipe 6 Interrupt
pub fn pep_7(&self) -> PEP_7_R
[src]
Bit 15 - Pipe 7 Interrupt
pub fn pep_8(&self) -> PEP_8_R
[src]
Bit 16 - Pipe 8 Interrupt
pub fn pep_9(&self) -> PEP_9_R
[src]
Bit 17 - Pipe 9 Interrupt
pub fn dma_0(&self) -> DMA_0_R
[src]
Bit 25 - DMA Channel 0 Interrupt
pub fn dma_1(&self) -> DMA_1_R
[src]
Bit 26 - DMA Channel 1 Interrupt
pub fn dma_2(&self) -> DMA_2_R
[src]
Bit 27 - DMA Channel 2 Interrupt
pub fn dma_3(&self) -> DMA_3_R
[src]
Bit 28 - DMA Channel 3 Interrupt
pub fn dma_4(&self) -> DMA_4_R
[src]
Bit 29 - DMA Channel 4 Interrupt
pub fn dma_5(&self) -> DMA_5_R
[src]
Bit 30 - DMA Channel 5 Interrupt
pub fn dma_6(&self) -> DMA_6_R
[src]
Bit 31 - DMA Channel 6 Interrupt
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self