Struct ark_api::render::GltfFlags

#[repr(C)]
pub struct GltfFlags { /* private fields */ }

Implementations

impl GltfFlags

pub const VERTEX_COLORS_SRGB: GltfFlags = Self{bits: 1,}

Set if vertex colors are in sRGB gamma, otherwise linear gamma assumed

pub const fn empty() -> GltfFlags

Returns an empty set of flags.

pub const fn all() -> GltfFlags

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<GltfFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> GltfFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> GltfFlags

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: GltfFlags) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: GltfFlags) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: GltfFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: GltfFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: GltfFlags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: GltfFlags, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: GltfFlags) -> GltfFlags

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: GltfFlags) -> GltfFlags

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: GltfFlags) -> GltfFlags

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: GltfFlags) -> GltfFlags

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> GltfFlags

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for GltfFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd<GltfFlags> for GltfFlags

fn bitand(self, other: GltfFlags) -> GltfFlags

Returns the intersection between the two sets of flags.

type Output = GltfFlags

The resulting type after applying the & operator.

impl BitAndAssign<GltfFlags> for GltfFlags

fn bitand_assign(&mut self, other: GltfFlags)

Disables all flags disabled in the set.

impl BitOr<GltfFlags> for GltfFlags

fn bitor(self, other: GltfFlags) -> GltfFlags

Returns the union of the two sets of flags.

type Output = GltfFlags

The resulting type after applying the | operator.

impl BitOrAssign<GltfFlags> for GltfFlags

fn bitor_assign(&mut self, other: GltfFlags)

Adds the set of flags.

impl BitXor<GltfFlags> for GltfFlags

fn bitxor(self, other: GltfFlags) -> GltfFlags

Returns the left flags, but with all the right flags toggled.

type Output = GltfFlags

The resulting type after applying the ^ operator.

impl BitXorAssign<GltfFlags> for GltfFlags

fn bitxor_assign(&mut self, other: GltfFlags)

Toggles the set of flags.

impl Clone for GltfFlags

fn clone(&self) -> GltfFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GltfFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for GltfFlags

fn deserialize<__D>(
    __deserializer: __D
) -> Result<GltfFlags, <__D as Deserializer<'de>>::Error> where
    __D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl Extend<GltfFlags> for GltfFlags

fn extend<T>(&mut self, iterator: T) where
    T: IntoIterator<Item = GltfFlags>, 

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<GltfFlags> for GltfFlags

fn from_iter<T>(iterator: T) -> GltfFlags where
    T: IntoIterator<Item = GltfFlags>, 

Creates a value from an iterator.

impl Hash for GltfFlags

fn hash<__H>(&self, state: &mut __H) where
    __H: Hasher, 

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl LowerHex for GltfFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for GltfFlags

fn not(self) -> GltfFlags

Returns the complement of this set of flags.

type Output = GltfFlags

The resulting type after applying the ! operator.

impl Octal for GltfFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Ord for GltfFlags

fn cmp(&self, other: &GltfFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<GltfFlags> for GltfFlags

fn eq(&self, other: &GltfFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &GltfFlags) -> bool

This method tests for !=.

impl PartialOrd<GltfFlags> for GltfFlags

fn partial_cmp(&self, other: &GltfFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a_, C_> Readable<'a_, C_> for GltfFlags where
    C_: Context, 

fn read_from<R_>(_reader_: &mut R_) -> Result<GltfFlags, <C_ as Context>::Error> where
    R_: Reader<'a_, C_>, 

fn minimum_bytes_needed() -> usize

fn read_from_buffer(buffer: &'a [u8]) -> Result<Self, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

Deserializes from a given buffer.

fn read_with_length_from_buffer(
    buffer: &'a [u8]
) -> (Result<Self, <C as Context>::Error>, usize) where
    Self: DefaultContext<Context = C>,
    C: Default, 

Deserializes from a given buffer while also returning the amount of bytes consumed.

fn read_from_buffer_copying_data(
    buffer: &[u8]
) -> Result<Self, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

Deserializes from a given buffer.

fn read_with_length_from_buffer_copying_data(
    buffer: &[u8]
) -> (Result<Self, <C as Context>::Error>, usize) where
    Self: DefaultContext<Context = C>,
    C: Default, 

Deserializes from a given buffer while also returning the amount of bytes consumed.

fn read_from_stream_unbuffered(
    stream: impl Read
) -> Result<Self, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

Reads from a given stream without any buffering.

fn read_from_stream_buffered(
    stream: impl Read
) -> Result<Self, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

Reads from a given stream with internal buffering.

fn read_from_file(path: impl AsRef<Path>) -> Result<Self, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

fn read_from_buffer_with_ctx(
    context: C,
    buffer: &'a [u8]
) -> Result<Self, <C as Context>::Error>

fn read_with_length_from_buffer_with_ctx(
    context: C,
    buffer: &'a [u8]
) -> (Result<Self, <C as Context>::Error>, usize)

fn read_from_buffer_copying_data_with_ctx(
    context: C,
    buffer: &[u8]
) -> Result<Self, <C as Context>::Error>

fn read_with_length_from_buffer_copying_data_with_ctx(
    context: C,
    buffer: &[u8]
) -> (Result<Self, <C as Context>::Error>, usize)

fn read_with_length_from_buffer_copying_data_with_ctx_mut(
    context: &mut C,
    buffer: &[u8]
) -> (Result<Self, <C as Context>::Error>, usize)

fn read_from_stream_unbuffered_with_ctx<S>(
    context: C,
    stream: S
) -> Result<Self, <C as Context>::Error> where
    S: Read, 

fn read_from_stream_buffered_with_ctx<S>(
    context: C,
    stream: S
) -> Result<Self, <C as Context>::Error> where
    S: Read, 

fn read_from_file_with_ctx(
    context: C,
    path: impl AsRef<Path>
) -> Result<Self, <C as Context>::Error>

impl Serialize for GltfFlags

fn serialize<__S>(
    &self,
    __serializer: __S
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl Sub<GltfFlags> for GltfFlags

fn sub(self, other: GltfFlags) -> GltfFlags

Returns the set difference of the two sets of flags.

type Output = GltfFlags

The resulting type after applying the - operator.

impl SubAssign<GltfFlags> for GltfFlags

fn sub_assign(&mut self, other: GltfFlags)

Disables all flags enabled in the set.

impl UpperHex for GltfFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<C_> Writable<C_> for GltfFlags where
    C_: Context, 

fn write_to<T_>(&self, _writer_: &mut T_) -> Result<(), <C_ as Context>::Error> where
    T_: Writer<C_> + ?Sized, 

fn write_to_buffer(&self, buffer: &mut [u8]) -> Result<(), <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

fn write_to_vec(&self) -> Result<Vec<u8, Global>, <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

fn write_to_stream<S>(&self, stream: S) -> Result<(), <C as Context>::Error> where
    S: Write,
    Self: DefaultContext<Context = C>,
    C: Default, 

fn write_to_file(
    &self,
    path: impl AsRef<Path>
) -> Result<(), <C as Context>::Error> where
    Self: DefaultContext<Context = C>,
    C: Default, 

fn write_to_buffer_with_ctx(
    &self,
    context: C,
    buffer: &mut [u8]
) -> Result<(), <C as Context>::Error>

fn write_to_buffer_with_ctx_mut(
    &self,
    context: &mut C,
    buffer: &mut [u8]
) -> Result<(), <C as Context>::Error>

fn write_to_vec_with_ctx(
    &self,
    context: C
) -> Result<Vec<u8, Global>, <C as Context>::Error>

fn write_to_vec_with_ctx_mut(
    &self,
    context: &mut C
) -> Result<Vec<u8, Global>, <C as Context>::Error>

fn write_to_stream_with_ctx<S>(
    &self,
    context: C,
    stream: S
) -> Result<(), <C as Context>::Error> where
    S: Write, 

fn write_to_file_with_ctx(
    &self,
    context: C,
    path: impl AsRef<Path>
) -> Result<(), <C as Context>::Error>

fn bytes_needed(&self) -> Result<usize, <C as Context>::Error>

impl Zeroable for GltfFlags

fn zeroed() -> Self

Calls zeroed.

impl Copy for GltfFlags

impl Eq for GltfFlags

impl Pod for GltfFlags

impl StructuralEq for GltfFlags

impl StructuralPartialEq for GltfFlags