[−][src]Struct alt_stm32f30x_hal::stm32::usart1::isr::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn reack(&self) -> REACKR
[src]
Bit 22 - Receive enable acknowledge flag
pub fn teack(&self) -> TEACKR
[src]
Bit 21 - Transmit enable acknowledge flag
pub fn wuf(&self) -> WUFR
[src]
Bit 20 - Wakeup from Stop mode flag
pub fn rwu(&self) -> RWUR
[src]
Bit 19 - Receiver wakeup from Mute mode
pub fn sbkf(&self) -> SBKFR
[src]
Bit 18 - Send break flag
pub fn cmf(&self) -> CMFR
[src]
Bit 17 - character match flag
pub fn busy(&self) -> BUSYR
[src]
Bit 16 - Busy flag
pub fn abrf(&self) -> ABRFR
[src]
Bit 15 - Auto baud rate flag
pub fn abre(&self) -> ABRER
[src]
Bit 14 - Auto baud rate error
pub fn eobf(&self) -> EOBFR
[src]
Bit 12 - End of block flag
pub fn rtof(&self) -> RTOFR
[src]
Bit 11 - Receiver timeout
pub fn cts(&self) -> CTSR
[src]
Bit 10 - CTS flag
pub fn ctsif(&self) -> CTSIFR
[src]
Bit 9 - CTS interrupt flag
pub fn lbdf(&self) -> LBDFR
[src]
Bit 8 - LIN break detection flag
pub fn txe(&self) -> TXER
[src]
Bit 7 - Transmit data register empty
pub fn tc(&self) -> TCR
[src]
Bit 6 - Transmission complete
pub fn rxne(&self) -> RXNER
[src]
Bit 5 - Read data register not empty
pub fn idle(&self) -> IDLER
[src]
Bit 4 - Idle line detected
pub fn ore(&self) -> ORER
[src]
Bit 3 - Overrun error
pub fn nf(&self) -> NFR
[src]
Bit 2 - Noise detected flag
pub fn fe(&self) -> FER
[src]
Bit 1 - Framing error
pub fn pe(&self) -> PER
[src]
Bit 0 - Parity error
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self