[−][src]Struct alt_stm32f30x_hal::stm32::rcc::ahbenr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut W
[src]
Writes raw bits to the register
pub fn dma1en(&mut self) -> _DMA1ENW
[src]
Bit 0 - DMA1 clock enable
pub fn dma2en(&mut self) -> _DMA2ENW
[src]
Bit 1 - DMA2 clock enable
pub fn sramen(&mut self) -> _SRAMENW
[src]
Bit 2 - SRAM interface clock enable
pub fn flitfen(&mut self) -> _FLITFENW
[src]
Bit 4 - FLITF clock enable
pub fn fmcen(&mut self) -> _FMCENW
[src]
Bit 5 - FMC clock enable
pub fn crcen(&mut self) -> _CRCENW
[src]
Bit 6 - CRC clock enable
pub fn iophen(&mut self) -> _IOPHENW
[src]
Bit 16 - IO port H clock enable
pub fn iopaen(&mut self) -> _IOPAENW
[src]
Bit 17 - I/O port A clock enable
pub fn iopben(&mut self) -> _IOPBENW
[src]
Bit 18 - I/O port B clock enable
pub fn iopcen(&mut self) -> _IOPCENW
[src]
Bit 19 - I/O port C clock enable
pub fn iopden(&mut self) -> _IOPDENW
[src]
Bit 20 - I/O port D clock enable
pub fn iopeen(&mut self) -> _IOPEENW
[src]
Bit 21 - I/O port E clock enable
pub fn iopfen(&mut self) -> _IOPFENW
[src]
Bit 22 - I/O port F clock enable
pub fn iopgen(&mut self) -> _IOPGENW
[src]
Bit 23 - I/O port G clock enable
pub fn tscen(&mut self) -> _TSCENW
[src]
Bit 24 - Touch sensing controller clock enable
pub fn adc12en(&mut self) -> _ADC12ENW
[src]
Bit 28 - ADC1 and ADC2 clock enable
pub fn adc34en(&mut self) -> _ADC34ENW
[src]
Bit 29 - ADC3 and ADC4 clock enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self