Struct MavSysStatusSensor 

pub struct MavSysStatusSensor(/* private fields */);

These encode the sensors whose status is sent as part of the SYS_STATUS message.

Implementations

impl MavSysStatusSensor

pub const MAV_SYS_STATUS_SENSOR_3D_GYRO: MavSysStatusSensor

0x01 3D gyro

pub const MAV_SYS_STATUS_SENSOR_3D_ACCEL: MavSysStatusSensor

0x02 3D accelerometer

pub const MAV_SYS_STATUS_SENSOR_3D_MAG: MavSysStatusSensor

0x04 3D magnetometer

pub const MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE: MavSysStatusSensor

0x08 absolute pressure

pub const MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE: MavSysStatusSensor

0x10 differential pressure

pub const MAV_SYS_STATUS_SENSOR_GPS: MavSysStatusSensor

0x20 GPS

pub const MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW: MavSysStatusSensor

0x40 optical flow

pub const MAV_SYS_STATUS_SENSOR_VISION_POSITION: MavSysStatusSensor

0x80 computer vision position

pub const MAV_SYS_STATUS_SENSOR_LASER_POSITION: MavSysStatusSensor

0x100 laser based position

pub const MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH: MavSysStatusSensor

0x200 external ground truth (Vicon or Leica)

pub const MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL: MavSysStatusSensor

0x400 3D angular rate control

pub const MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION: MavSysStatusSensor

0x800 attitude stabilization

pub const MAV_SYS_STATUS_SENSOR_YAW_POSITION: MavSysStatusSensor

0x1000 yaw position

pub const MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL: MavSysStatusSensor

0x2000 z/altitude control

pub const MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL: MavSysStatusSensor

0x4000 x/y position control

pub const MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS: MavSysStatusSensor

0x8000 motor outputs / control

pub const MAV_SYS_STATUS_SENSOR_RC_RECEIVER: MavSysStatusSensor

0x10000 RC receiver

pub const MAV_SYS_STATUS_SENSOR_3D_GYRO2: MavSysStatusSensor

0x20000 2nd 3D gyro

pub const MAV_SYS_STATUS_SENSOR_3D_ACCEL2: MavSysStatusSensor

0x40000 2nd 3D accelerometer

pub const MAV_SYS_STATUS_SENSOR_3D_MAG2: MavSysStatusSensor

0x80000 2nd 3D magnetometer

pub const MAV_SYS_STATUS_GEOFENCE: MavSysStatusSensor

0x100000 geofence

pub const MAV_SYS_STATUS_AHRS: MavSysStatusSensor

0x200000 AHRS subsystem health

pub const MAV_SYS_STATUS_TERRAIN: MavSysStatusSensor

0x400000 Terrain subsystem health

pub const MAV_SYS_STATUS_REVERSE_MOTOR: MavSysStatusSensor

0x800000 Motors are reversed

pub const MAV_SYS_STATUS_LOGGING: MavSysStatusSensor

0x1000000 Logging

pub const MAV_SYS_STATUS_SENSOR_BATTERY: MavSysStatusSensor

0x2000000 Battery

pub const MAV_SYS_STATUS_SENSOR_PROXIMITY: MavSysStatusSensor

0x4000000 Proximity

pub const MAV_SYS_STATUS_SENSOR_SATCOM: MavSysStatusSensor

0x8000000 Satellite Communication

pub const MAV_SYS_STATUS_PREARM_CHECK: MavSysStatusSensor

0x10000000 pre-arm check status. Always healthy when armed

pub const MAV_SYS_STATUS_OBSTACLE_AVOIDANCE: MavSysStatusSensor

0x20000000 Avoidance/collision prevention

pub const MAV_SYS_STATUS_SENSOR_PROPULSION: MavSysStatusSensor

0x40000000 propulsion (actuator, esc, motor or propellor)

pub const MAV_SYS_STATUS_EXTENSION_USED: MavSysStatusSensor

0x80000000 Extended bit-field are used for further sensor status bits (needs to be set in onboard_control_sensors_present only)

impl MavSysStatusSensor

pub const fn empty() -> MavSysStatusSensor

Get a flags value with all bits unset.

pub const fn all() -> MavSysStatusSensor

Get a flags value with all known bits set.

pub const fn bits(&self) -> u32

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u32) -> Option<MavSysStatusSensor>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u32) -> MavSysStatusSensor

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u32) -> MavSysStatusSensor

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<MavSysStatusSensor>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in self are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: MavSysStatusSensor) -> bool

Whether any set bits in other are also set in self.

pub const fn contains(&self, other: MavSysStatusSensor) -> bool

Whether all set bits in other are also set in self.

pub fn insert(&mut self, other: MavSysStatusSensor)

The bitwise or (|) of the bits in self and other.

pub fn remove(&mut self, other: MavSysStatusSensor)

The intersection of self with the complement of other (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: MavSysStatusSensor)

The bitwise exclusive-or (^) of the bits in self and other.

pub fn set(&mut self, other: MavSysStatusSensor, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The bitwise and (&) of the bits in self and other.

pub const fn union(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The bitwise or (|) of the bits in self and other.

pub const fn difference(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The intersection of self with the complement of other (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference( self, other: MavSysStatusSensor, ) -> MavSysStatusSensor

The bitwise exclusive-or (^) of the bits in self and other.

pub const fn complement(self) -> MavSysStatusSensor

The bitwise negation (!) of the bits in self, truncating the result.

impl MavSysStatusSensor

pub const fn iter(&self) -> Iter<MavSysStatusSensor>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<MavSysStatusSensor>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

impl MavSysStatusSensor

pub const DEFAULT: MavSysStatusSensor = Self::MAV_SYS_STATUS_SENSOR_3D_GYRO

Trait Implementations

impl Binary for MavSysStatusSensor

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd for MavSysStatusSensor

fn bitand(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The bitwise and (&) of the bits in self and other.

type Output = MavSysStatusSensor

The resulting type after applying the & operator.

impl BitAndAssign for MavSysStatusSensor

fn bitand_assign(&mut self, other: MavSysStatusSensor)

The bitwise and (&) of the bits in self and other.

impl BitOr for MavSysStatusSensor

fn bitor(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The bitwise or (|) of the bits in self and other.

type Output = MavSysStatusSensor

The resulting type after applying the | operator.

impl BitOrAssign for MavSysStatusSensor

fn bitor_assign(&mut self, other: MavSysStatusSensor)

The bitwise or (|) of the bits in self and other.

impl BitXor for MavSysStatusSensor

fn bitxor(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The bitwise exclusive-or (^) of the bits in self and other.

type Output = MavSysStatusSensor

The resulting type after applying the ^ operator.

impl BitXorAssign for MavSysStatusSensor

fn bitxor_assign(&mut self, other: MavSysStatusSensor)

The bitwise exclusive-or (^) of the bits in self and other.

impl Clone for MavSysStatusSensor

fn clone(&self) -> MavSysStatusSensor

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for MavSysStatusSensor

impl Debug for MavSysStatusSensor

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for MavSysStatusSensor

fn default() -> MavSysStatusSensor

Returns the “default value” for a type.

impl Extend<MavSysStatusSensor> for MavSysStatusSensor

fn extend<T>(&mut self, iterator: T)

where T: IntoIterator<Item = MavSysStatusSensor>,

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: T)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for MavSysStatusSensor

const FLAGS: &'static [Flag<MavSysStatusSensor>]

The set of defined flags.

type Bits = u32

The underlying bits type.

fn bits(&self) -> u32

Get the underlying bits value.

fn from_bits_retain(bits: u32) -> MavSysStatusSensor

Convert from a bits value exactly.

fn all_named() -> MavSysStatusSensor

Get a flags value with all bits from named flags set.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn known_bits(&self) -> Self::Bits

Get the known bits from a flags value.

fn unknown_bits(&self) -> Self::Bits

Get the unknown bits from a flags value.

fn contains_unknown_bits(&self) -> bool

This method will return true if any unknown bits are set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn iter_defined_names() -> IterDefinedNames<Self>

Yield a set of all named flags defined by Self::FLAGS.

fn iter_equal_names(&self) -> IterEqualNames<Self>

Get an iterator over all defined names for this flags value.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in other are also set in self.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in other are also set in self.

fn truncate(&mut self)

where Self: Sized,

Remove any unknown bits from the flags.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in self and other.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of self with the complement of other (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in self and other.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn clear(&mut self)

where Self: Sized,

Unsets all bits in the flags.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in self and other.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in self and other.

fn difference(self, other: Self) -> Self

The intersection of self with the complement of other (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in self and other.

fn complement(self) -> Self

The bitwise negation (!) of the bits in self, truncating the result.

impl FromIterator<MavSysStatusSensor> for MavSysStatusSensor

fn from_iter<T>(iterator: T) -> MavSysStatusSensor

where T: IntoIterator<Item = MavSysStatusSensor>,

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for MavSysStatusSensor

type Item = MavSysStatusSensor

The type of the elements being iterated over.

type IntoIter = Iter<MavSysStatusSensor>

Which kind of iterator are we turning this into?

fn into_iter(self) -> <MavSysStatusSensor as IntoIterator>::IntoIter

Creates an iterator from a value.

impl LowerHex for MavSysStatusSensor

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for MavSysStatusSensor

fn not(self) -> MavSysStatusSensor

The bitwise negation (!) of the bits in self, truncating the result.

type Output = MavSysStatusSensor

The resulting type after applying the ! operator.

impl Octal for MavSysStatusSensor

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for MavSysStatusSensor

fn eq(&self, other: &MavSysStatusSensor) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl StructuralPartialEq for MavSysStatusSensor

impl Sub for MavSysStatusSensor

fn sub(self, other: MavSysStatusSensor) -> MavSysStatusSensor

The intersection of self with the complement of other (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = MavSysStatusSensor

The resulting type after applying the - operator.

impl SubAssign for MavSysStatusSensor

fn sub_assign(&mut self, other: MavSysStatusSensor)

The intersection of self with the complement of other (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for MavSysStatusSensor

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.