#[non_exhaustive]pub enum Error {
Show 15 variants
Config(Box<Error>),
Paseto(String),
Http(Box<Error>),
Io(Error),
Unauthorized(String),
Forbidden(String),
NotFound(String),
BadRequest(String),
RateLimitExceeded {
retry_after_secs: u64,
},
Conflict(String),
ValidationError(String),
NotSupported(String),
External(String),
Internal(String),
Other(String),
}Expand description
Main error type for the framework
Large error variants are boxed to reduce stack size
Marked #[non_exhaustive]: new variants are added as the framework grows
(Tls was added in 0.34), and downstream code must not be broken by that.
Match with a _ arm.
Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
Config(Box<Error>)
Configuration error
Paseto(String)
PASETO error (default token format)
Http(Box<Error>)
HTTP error
Io(Error)
I/O error
Authentication error
Forbidden(String)
Authorization error
NotFound(String)
Resource not found
BadRequest(String)
Bad request
RateLimitExceeded
Rate limit exceeded (HTTP 429).
The response always carries Retry-After: retry_after_secs, so a
client that honors it waits exactly as long as the limiter needs and
no longer. Build it with Error::rate_limited from the limiter’s
wait, which rounds up and never answers 0.
Conflict(String)
Resource conflict (409)
ValidationError(String)
Validation error (422)
NotSupported(String)
Not supported error (501)
External(String)
External service error (502)
Internal(String)
Internal server error
Other(String)
Generic error
Implementations§
Source§impl Error
impl Error
Sourcepub fn rate_limited(wait: Duration) -> Self
pub fn rate_limited(wait: Duration) -> Self
A rate-limit refusal for a caller that must wait wait before retrying.
Retry-After counts whole seconds, so the wait is rounded up, never
down: a client told to come back sooner than the limiter admits it is
refused again. A zero or sub-second wait still answers 1, because
Retry-After: 0 invites an immediate retry into the same refusal.
Trait Implementations§
Source§impl Error for Error
impl Error for Error
Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
use the Display impl or to_string()
Source§impl From<StorageError> for Error
impl From<StorageError> for Error
Source§fn from(error: StorageError) -> Self
fn from(error: StorageError) -> Self
Source§impl IntoResponse for Error
impl IntoResponse for Error
Source§fn into_response(self) -> Response
fn into_response(self) -> Response
Auto Trait Implementations§
impl !RefUnwindSafe for Error
impl !UnwindSafe for Error
impl Freeze for Error
impl Send for Error
impl Sync for Error
impl Unpin for Error
impl UnsafeUnpin for Error
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> FutureExt for T
impl<T> FutureExt for T
Source§fn with_context(self, otel_cx: Context) -> WithContext<Self> ⓘ
fn with_context(self, otel_cx: Context) -> WithContext<Self> ⓘ
Source§fn with_current_context(self) -> WithContext<Self> ⓘ
fn with_current_context(self) -> WithContext<Self> ⓘ
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
Source§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T in a tonic::RequestSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);