Struct winx::file::Flags

pub struct Flags { /* fields omitted */ }

Implementations

impl Flags

pub const FILE_FLAG_BACKUP_SEMANTICS: Flags

The file is being opened or created for a backup or restore operation. The system ensures that the calling process overrides file security checks when the process has SE_BACKUP_NAME and SE_RESTORE_NAME privileges. You must set this flag to obtain a handle to a directory. A directory handle can be passed to some functions instead of a file handle.

pub const FILE_FLAG_DELETE_ON_CLOSE: Flags

The file is to be deleted immediately after all of its handles are closed, which includes the specified handle and any other open or duplicated handles. If there are existing open handles to a file, the call fails unless they were all opened with the FILE_SHARE_DELETE share mode. Subsequent open requests for the file fail, unless the FILE_SHARE_DELETE share mode is specified.

pub const FILE_FLAG_NO_BUFFERING: Flags

The file or device is being opened with no system caching for data reads and writes. This flag does not affect hard disk caching or memory mapped files. There are strict requirements for successfully working with files opened with CreateFile using the FILE_FLAG_NO_BUFFERING flag.

pub const FILE_FLAG_OPEN_NO_RECALL: Flags

The file data is requested, but it should continue to be located in remote storage. It should not be transported back to local storage. This flag is for use by remote storage systems.

pub const FILE_FLAG_OPEN_REPARSE_POINT: Flags

Normal reparse point processing will not occur; CreateFile will attempt to open the reparse point. When a file is opened, a file handle is returned, whether or not the filter that controls the reparse point is operational. This flag cannot be used with the CREATE_ALWAYS flag. If the file is not a reparse point, then this flag is ignored.

pub const FILE_FLAG_OVERLAPPED: Flags

The file or device is being opened or created for asynchronous I/O. When subsequent I/O operations are completed on this handle, the event specified in the OVERLAPPED structure will be set to the signaled state. If this flag is specified, the file can be used for simultaneous read and write operations. If this flag is not specified, then I/O operations are serialized, even if the calls to the read and write functions specify an OVERLAPPED structure.

pub const FILE_FLAG_POSIX_SEMANTICS: Flags

Access will occur according to POSIX rules. This includes allowing multiple files with names, differing only in case, for file systems that support that naming. Use care when using this option, because files created with this flag may not be accessible by applications that are written for MS-DOS or 16-bit Windows.

pub const FILE_FLAG_RANDOM_ACCESS: Flags

Access is intended to be random. The system can use this as a hint to optimize file caching. This flag has no effect if the file system does not support cached I/O and FILE_FLAG_NO_BUFFERING.

pub const FILE_FLAG_SESSION_AWARE: Flags

The file or device is being opened with session awareness. If this flag is not specified, then per-session devices (such as a device using RemoteFX USB Redirection) cannot be opened by processes running in session 0. This flag has no effect for callers not in session 0. This flag is supported only on server editions of Windows.

pub const FILE_FLAG_SEQUENTIAL_SCAN: Flags

Access is intended to be sequential from beginning to end. The system can use this as a hint to optimize file caching. This flag should not be used if read-behind (that is, reverse scans) will be used. This flag has no effect if the file system does not support cached I/O and FILE_FLAG_NO_BUFFERING.

pub const FILE_FLAG_WRITE_THROUGH: Flags

Write operations will not go through any intermediate cache, they will go directly to disk.

pub const fn empty() -> Flags

Returns an empty set of flags

pub const fn all() -> Flags

Returns the set containing all flags.

pub const fn bits(&self) -> DWORD

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: DWORD) -> Option<Flags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: DWORD) -> Flags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: DWORD) -> Flags

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Flags) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Flags) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: Flags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Flags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Flags)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Flags, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Binary for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd<Flags> for Flags

fn bitand(self, other: Flags) -> Flags

Returns the intersection between the two sets of flags.

type Output = Flags

The resulting type after applying the & operator.

impl BitAndAssign<Flags> for Flags

fn bitand_assign(&mut self, other: Flags)

Disables all flags disabled in the set.

impl BitOr<Flags> for Flags

fn bitor(self, other: Flags) -> Flags

Returns the union of the two sets of flags.

type Output = Flags

The resulting type after applying the | operator.

impl BitOrAssign<Flags> for Flags

fn bitor_assign(&mut self, other: Flags)

Adds the set of flags.

impl BitXor<Flags> for Flags

fn bitxor(self, other: Flags) -> Flags

Returns the left flags, but with all the right flags toggled.

type Output = Flags

The resulting type after applying the ^ operator.

impl BitXorAssign<Flags> for Flags

fn bitxor_assign(&mut self, other: Flags)

Toggles the set of flags.

impl Clone for Flags

fn clone(&self) -> Flags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<Flags> for Flags

fn extend<T: IntoIterator<Item = Flags>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<Flags> for Flags

fn from_iter<T: IntoIterator<Item = Flags>>(iterator: T) -> Flags

Creates a value from an iterator.

impl Hash for Flags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl LowerHex for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Flags

fn not(self) -> Flags

Returns the complement of this set of flags.

type Output = Flags

The resulting type after applying the ! operator.

impl Octal for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for Flags

fn cmp(&self, other: &Flags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl PartialEq<Flags> for Flags

fn eq(&self, other: &Flags) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Flags) -> bool

This method tests for !=.

impl PartialOrd<Flags> for Flags

fn partial_cmp(&self, other: &Flags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub<Flags> for Flags

fn sub(self, other: Flags) -> Flags

Returns the set difference of the two sets of flags.

type Output = Flags

The resulting type after applying the - operator.

impl SubAssign<Flags> for Flags

fn sub_assign(&mut self, other: Flags)

Disables all flags enabled in the set.

impl UpperHex for Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for Flags

impl Eq for Flags

impl StructuralEq for Flags

impl StructuralPartialEq for Flags