wingy_core/event_loop/

mod.rs

pub mod never_return;
pub mod primary_selection;
pub mod pump_events;
pub mod register;
pub mod run_on_demand;

use std::any::Any;
use std::fmt::{self, Debug};
use std::sync::Arc;
use std::sync::atomic::{AtomicUsize, Ordering};
use std::time::Duration;

use rwh_06::{DisplayHandle, HandleError, HasDisplayHandle};

use crate::Instant;
use crate::application::ApplicationHandler;
use crate::cursor::{CustomCursor, CustomCursorSource};
use crate::data_transfer::{DataTransfer, DataTransferId, DataTransferSend, TransferType};
use crate::error::{
    CreateWindowError, CustomCursorError, EventLoopError, NotSupportedError, TransferError,
};
use crate::icon::Icon;
use crate::monitor::MonitorHandle;
use crate::window::{Theme, Window, WindowAttributes, WindowId};

/// Common methods to implement for the platform event loop.
pub trait EventLoopProvider: fmt::Debug {
    /// Run the event loop with the given application on the calling thread.
    ///
    /// The `app` is dropped when the event loop is shut down.
    ///
    /// ## Event loop flow
    ///
    /// This function internally handles the different parts of a traditional event-handling loop.
    /// You can imagine this method as being implemented like this:
    ///
    /// ```rust,ignore
    /// let mut start_cause = StartCause::Init;
    ///
    /// // Run the event loop.
    /// while !event_loop.exiting() {
    ///     // Wake up.
    ///     app.new_events(event_loop, start_cause);
    ///
    ///     // Indicate that surfaces can now safely be created.
    ///     if start_cause == StartCause::Init {
    ///         app.can_create_surfaces(event_loop);
    ///     }
    ///
    ///     // Handle proxy wake-up event.
    ///     if event_loop.proxy_wake_up_set() {
    ///         event_loop.proxy_wake_up_clear();
    ///         app.proxy_wake_up(event_loop);
    ///     }
    ///
    ///     // Handle actions done by the user / system such as moving the cursor, resizing the
    ///     // window, changing the window theme, etc.
    ///     for event in event_loop.events() {
    ///         match event {
    ///             window event => app.window_event(event_loop, window_id, event),
    ///             device event => app.device_event(event_loop, device_id, event),
    ///         }
    ///     }
    ///
    ///     // Handle redraws.
    ///     for window_id in event_loop.pending_redraws() {
    ///         app.window_event(event_loop, window_id, WindowEvent::RedrawRequested);
    ///     }
    ///
    ///     // Done handling events, wait until we're woken up again.
    ///     app.about_to_wait(event_loop);
    ///     start_cause = event_loop.wait_if_necessary();
    /// }
    ///
    /// // Finished running, drop application state.
    /// drop(app);
    /// ```
    ///
    /// This is of course a very coarse-grained overview, and leaves out timing details like
    /// [`ControlFlow::WaitUntil`] and life-cycle methods like [`ApplicationHandler::resumed`], but
    /// it should give you an idea of how things fit together.
    ///
    /// ## Returns
    ///
    /// The semantics of this function is defined by the target platform. Consult the implementor
    /// docs for details.
    fn run_app<A: ApplicationHandler + 'static>(self, app: A) -> Result<(), EventLoopError>;

    /// Creates an [`EventLoopProxy`] that can be used to dispatch user events
    /// to the main event loop, possibly from another thread.
    fn create_proxy(&self) -> EventLoopProxy;

    /// Gets a persistent reference to the underlying platform display.
    ///
    /// See the [`OwnedDisplayHandle`] type for more information.
    fn owned_display_handle(&self) -> OwnedDisplayHandle;

    /// Change if or when [`DeviceEvent`]s are captured.
    ///
    /// See [`ActiveEventLoop::listen_device_events`] for details.
    ///
    /// [`DeviceEvent`]: crate::event::DeviceEvent
    fn listen_device_events(&self, allowed: DeviceEvents);

    /// Sets the [`ControlFlow`].
    fn set_control_flow(&self, control_flow: ControlFlow);

    /// Create custom cursor.
    fn create_custom_cursor(
        &self,
        custom_cursor: CustomCursorSource,
    ) -> Result<CustomCursor, CustomCursorError>;
}

pub trait ActiveEventLoop: Any + fmt::Debug {
    /// Creates an [`EventLoopProxy`] that can be used to dispatch user events
    /// to the main event loop, possibly from another thread.
    fn create_proxy(&self) -> EventLoopProxy;

    /// Create the window.
    ///
    /// Possible causes of error include denied permission, incompatible system, and lack of memory.
    ///
    /// ## Platform-specific
    ///
    /// - **Web:** The window is created but not inserted into the Web page automatically. Please
    ///   see the Web platform module for more information.
    fn create_window(
        &self,
        window_attributes: WindowAttributes,
    ) -> Result<Box<dyn Window>, CreateWindowError>;

    /// Create custom cursor.
    ///
    /// ## Platform-specific
    ///
    /// **iOS / Android / Orbital:** Unsupported.
    fn create_custom_cursor(
        &self,
        custom_cursor: CustomCursorSource,
    ) -> Result<CustomCursor, CustomCursorError>;

    /// Returns the list of all the monitors available on the system.
    ///
    /// ## Platform-specific
    ///
    /// **Web:** Only returns the current monitor without `detailed monitor permissions`.
    fn available_monitors(&self) -> Box<dyn Iterator<Item = MonitorHandle>>;

    /// Returns the primary monitor of the system.
    ///
    /// Returns `None` if it can't identify any monitor as a primary one.
    ///
    /// ## Platform-specific
    ///
    /// - **Wayland:** Always returns `None`.
    /// - **Web:** Always returns `None` without `detailed monitor permissions`.
    fn primary_monitor(&self) -> Option<MonitorHandle>;

    /// Change if or when [`DeviceEvent`]s are captured.
    ///
    /// Since the [`DeviceEvent`] capture can lead to high CPU usage for unfocused windows, wingy
    /// will ignore them by default for unfocused windows on Linux/BSD. This method allows changing
    /// this at runtime to explicitly capture them again.
    ///
    /// ## Platform-specific
    ///
    /// - **Wayland / macOS / iOS / Android / Orbital:** Unsupported.
    ///
    /// [`DeviceEvent`]: crate::event::DeviceEvent
    fn listen_device_events(&self, allowed: DeviceEvents);

    /// Returns the current system theme.
    ///
    /// Returns `None` if it cannot be determined on the current platform.
    ///
    /// ## Platform-specific
    ///
    /// - **iOS / Android / Wayland / x11 / Orbital:** Unsupported.
    fn system_theme(&self) -> Option<Theme>;

    /// Sets the [`ControlFlow`].
    fn set_control_flow(&self, control_flow: ControlFlow);

    /// Gets the current [`ControlFlow`].
    fn control_flow(&self) -> ControlFlow;

    /// Stop the event loop.
    ///
    /// ## Platform-specific
    ///
    /// ### iOS
    ///
    /// It is not possible to programmatically exit/quit an application on iOS, so this function is
    /// a no-op there. See also [this technical Q&A][qa1561].
    ///
    /// [qa1561]: https://developer.apple.com/library/archive/qa/qa1561/_index.html
    fn exit(&self);

    /// Returns whether the [`ActiveEventLoop`] is about to stop.
    ///
    /// Set by [`exit()`][Self::exit].
    fn exiting(&self) -> bool;

    /// Gets a persistent reference to the underlying platform display.
    ///
    /// See the [`OwnedDisplayHandle`] type for more information.
    fn owned_display_handle(&self) -> OwnedDisplayHandle;

    /// Get the raw-window-handle handle.
    fn rwh_06_handle(&self) -> &dyn HasDisplayHandle;

    /// Request to fetch a type from a [data transfer](crate::data_transfer::DataTransfer).
    ///
    /// This may be called multiple times on the same [`DataTransferId`] with different types,
    /// and may be called at any point during the drag operation, including during handling the
    /// [`DragDropped`](crate::event::WindowEvent::DragDropped) event. After that event has been
    /// received, though, the data transfer is not guaranteed to be available. The data is
    /// _not_ guaranteed to be available during (or after) handling of
    /// [`DragLeft](crate::event::WindowEvent::DragLeft).
    ///
    /// Once available, the data will be supplied to the application with the
    /// [`DataTransferReceived`](crate::event::WindowEvent::DataTransferReceived) event.
    fn fetch_data_transfer(
        &self,
        id: DataTransferId,
        type_: &dyn TransferType,
    ) -> Result<AsyncRequestSerial, TransferError> {
        let _ = id;
        let _ = type_;
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Get a [data transfer](DataTransfer) by its ID.
    ///
    /// If the ID is invalid (e.g. if the lifetime of the data transfer has expired), this will
    /// return an error.
    fn data_transfer(&self, id: DataTransferId) -> Result<Box<dyn DataTransfer>, TransferError> {
        let _ = id;
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Set a given set of `DndAction`s as the valid actions for the given [`DataTransferId`],
    /// if the transfer ID is from an incoming drag-and-drop operation.
    ///
    /// This allows the OS/compositor to display the correct UI, indicating that the dragged data
    /// can be dropped. If the data transfer does not exist or is not from a drag-and-drop
    /// operation, will return an error.
    ///
    /// The operating system will consider the drag either accepted or rejected based on the
    /// set of valid actions supplied using this method, combined with the set of valid actions
    /// on the drag source. If the drag is rejected at the point that the user finalizes the drop,
    /// the application will receive [`DragLeft`](crate::event::WindowEvent::DragLeft) instead
    /// of [`DragDropped`](crate::event::WindowEvent::DragDropped).
    ///
    /// Note that _rejecting_ the drag is not the same as _canceling_ the drag. A rejected drag can
    /// be accepted later and the user can continue dragging it over other potential targets. On
    /// most platforms, there is no way for an application to explicitly cancel a drag
    /// operation.
    ///
    /// The set of actions is expected to be ordered by preference.
    fn set_valid_dnd_actions(
        &self,
        id: DataTransferId,
        actions: &[DndAction],
    ) -> Result<(), TransferError> {
        let _ = id;
        let _ = actions;
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Initiate a new drag-and-drop operation.
    ///
    /// See [`DataTransferSendBuilder`](crate::data_transfer::DataTransferSendBuilder) for how to
    /// create a new cross-platform data transfer, or [`DataTransferSend`] for a generic trait
    /// which can be implemented manually.
    ///
    /// The [`DataTransferId`] returned from this method, identifying the outgoing drag, is
    /// currently only used for identifying the drag in the
    /// [`OutgoingDragDropped`](crate::event::WindowEvent::OutgoingDragDropped) event. In most
    /// cases, a drag will be started while the mouse is over the window which started it. This
    /// means that, directly after this method is called, the window will then receive a
    /// [`DragEntered`](crate::event::WindowEvent::DragEntered) event. However, the ID identifying
    /// the incoming drag is not guaranteed to be the same as the ID returned from this method.
    ///
    /// For most cases, applications can treat all `DragEntered` events the same, whether they were
    /// initiated by the same application or a different application. However, if the user wants to
    /// have some kind of special handling for internal drag-and-drop, they will currently need
    /// to implement it via workaround. On all systems where drag-and-drop is implemented in
    /// Wingy, the application can make the assumption that only a single drag operation can
    /// occur at one time. Therefore, if `DragEntered` is received between calling this method
    /// and receiving `OutgoingDragDropped`, then you can assume that it's the same drag.
    /// In theory, Wayland allows multiple simultaneous drag operations at a time, but Wingy does
    /// not currently guarantee that this is supported correctly for either internal or external
    /// drag.
    ///
    /// ### Arguments
    ///
    /// - `source` - The ID of the window that initiated the drag operation.
    /// - `send_data` - The data provided by this drag operation. See
    ///   [`DataTransferSendBuilder`](crate::data_transfer::DataTransferSendBuilder).
    /// - `actions` - The set of valid actions for this drag operation. See [`DndAction`]. On
    ///   Wayland, this is expected to be ordered by preference.
    /// - `icon` - The icon to show while dragging.
    ///
    /// Some platforms have a more-expressive way of setting the visual component of a drag
    /// operation. For those platforms, consider using the platform-specific implementation of
    /// [`DataTransferSend`] for `send_data` and set this field to `None`.
    ///
    /// ### Returns
    ///
    /// A unique identifier for this drag operation, which will be later supplied by
    /// [`OutgoingDragDropped`](crate::event::WindowEvent::OutgoingDragDropped).
    fn start_drag(
        &self,
        source: WindowId,
        send_data: Box<dyn DataTransferSend>,
        actions: &[DndAction],
        icon: Option<DragIcon>,
    ) -> Result<DataTransferId, TransferError> {
        let _ = source;
        let _ = send_data;
        let _ = actions;
        let _ = icon;
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Get the current clipboard contents as a [data transfer](crate::data_transfer), or `None`
    /// if the clipboard is empty.
    ///
    /// The returned ID can be used with [`data_transfer`](Self::data_transfer) to inspect the
    /// available types, and with [`fetch_data_transfer`](Self::fetch_data_transfer) to read the
    /// data.
    ///
    /// As the clipboard is not tied to a window, the resulting
    /// [`DataTransferReceived`](crate::event::WindowEvent::DataTransferReceived)
    /// event is delivered to the focused window, or to an unspecified window
    /// if focus could not be determined.
    ///
    /// The ID is only valid until the clipboard contents change.
    fn clipboard(&self) -> Result<Option<DataTransferId>, TransferError> {
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Set the clipboard contents.
    ///
    /// See [`DataTransferSendBuilder`](crate::data_transfer::DataTransferSendBuilder) for how to
    /// create a new cross-platform data transfer.
    ///
    /// The data is sent lazily where supported by the platform: it is only encoded when another
    /// application requests one of the advertised types, and otherwise dropped once another
    /// application takes over the clipboard.
    fn set_clipboard(&self, send_data: Box<dyn DataTransferSend>) -> Result<(), TransferError> {
        let _ = send_data;
        Err(DATA_TRANSFER_NOT_SUPPORTED)
    }

    /// Access the primary selection platform extension, where available.
    ///
    /// ## Platform-specific
    ///
    /// - **Wayland:** Available if supported by the compositor.
    /// - **X11:** Always available.
    /// - **Others:** Unsupported.
    #[inline(always)]
    fn primary_selection_ext(&self) -> Option<&dyn primary_selection::PrimarySelectionExt> {
        None
    }
}

const DATA_TRANSFER_NOT_SUPPORTED: TransferError =
    TransferError::NotSupported(NotSupportedError::new(
        "Cross-application data transfer (e.g. drag-and-drop, clipboard) is unsupported on this \
         platform",
    ));

impl HasDisplayHandle for dyn ActiveEventLoop + '_ {
    fn display_handle(&self) -> Result<DisplayHandle<'_>, HandleError> {
        self.rwh_06_handle().display_handle()
    }
}

impl_dyn_casting!(ActiveEventLoop);

/// Information needed to initiate a new drag operation.
pub struct DragIcon {
    /// The icon to apply to the cursor.
    pub icon: Icon,
    /// An x offset applied to the dragged icon.
    ///
    /// This is specified in image pixels. 0 means that the left side of the icon will be at
    /// the cursor.
    pub offset_x: i32,
    /// A y offset applied to the dragged icon.
    ///
    /// This is specified in image pixels. 0 means that the top of the icon will be at the
    /// cursor.
    pub offset_y: i32,
}

impl From<Icon> for DragIcon {
    fn from(value: Icon) -> Self {
        Self { icon: value, offset_x: 0, offset_y: 0 }
    }
}

/// The set of available actions for a drag operation.
///
/// This is _not_ a bitset, as on some platforms (e.g. Wayland, macOS) the source and/or destination
/// are expected to provide some kind of order of preference.
#[repr(u8)]
#[derive(Debug, Clone, Copy, PartialEq)]
#[non_exhaustive]
pub enum DndAction {
    /// Move the dragged item from the source to the destination.
    ///
    /// # Platforms
    ///
    /// - Wayland
    /// - macOS
    /// - Windows
    Move,
    /// Copy the dragged item from the source to the destination.
    ///
    /// # Platforms
    ///
    /// - X11
    /// - Wayland
    /// - macOS
    /// - Windows
    Copy,
    /// A link is established between the source and the destination.
    ///
    /// # Platforms
    ///
    /// - macOS
    /// - Windows
    Link,
    /// The user will be prompted for what should be done
    ///
    /// # Platforms
    ///
    /// - Wayland
    Ask,
    /// The source and destination will negotiate the drag operation privately
    ///
    /// # Platforms
    ///
    /// - macOS
    Private,
}

/// Control the [`ActiveEventLoop`], possibly from a different thread, without referencing it
/// directly.
#[derive(Clone, Debug)]
pub struct EventLoopProxy {
    pub(crate) proxy: Arc<dyn EventLoopProxyProvider>,
}

impl EventLoopProxy {
    /// Wake up the [`ActiveEventLoop`], resulting in [`ApplicationHandler::proxy_wake_up()`] being
    /// called.
    ///
    /// Calls to this method are coalesced into a single call to [`proxy_wake_up`], see the
    /// documentation on that for details.
    ///
    /// If the event loop is no longer running, this is a no-op.
    ///
    /// [`proxy_wake_up`]: crate::application::ApplicationHandler::proxy_wake_up
    /// [`ApplicationHandler::proxy_wake_up()`]: crate::application::ApplicationHandler::proxy_wake_up
    ///
    /// # Platform-specific
    ///
    /// - **Windows**: The wake-up may be ignored under high contention, see [#3687].
    ///
    /// [#3687]: https://github.com/rust-windowing/winit/pull/3687
    pub fn wake_up(&self) {
        self.proxy.wake_up();
    }

    pub fn new(proxy: Arc<dyn EventLoopProxyProvider>) -> Self {
        Self { proxy }
    }
}

pub trait EventLoopProxyProvider: Send + Sync + Debug {
    /// See [`EventLoopProxy::wake_up`] for details.
    fn wake_up(&self);
}

/// A proxy for the underlying display handle.
///
/// The purpose of this type is to provide a cheaply cloneable handle to the underlying
/// display handle. This is often used by graphics APIs to connect to the underlying APIs.
/// It is difficult to keep a handle to the underlying event loop type or the [`ActiveEventLoop`]
/// type. In contrast, this type involves no lifetimes and can be persisted for as long as
/// needed.
///
/// For all platforms, this is one of the following:
///
/// - A zero-sized type that is likely optimized out.
/// - A reference-counted pointer to the underlying type.
#[derive(Clone)]
pub struct OwnedDisplayHandle {
    pub(crate) handle: Arc<dyn HasDisplayHandle + Send + Sync>,
}

impl OwnedDisplayHandle {
    pub fn new(handle: Arc<dyn HasDisplayHandle + Send + Sync>) -> Self {
        Self { handle }
    }
}

impl HasDisplayHandle for OwnedDisplayHandle {
    fn display_handle(&self) -> Result<DisplayHandle<'_>, HandleError> {
        self.handle.display_handle()
    }
}

impl fmt::Debug for OwnedDisplayHandle {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("OwnedDisplayHandle").finish_non_exhaustive()
    }
}

impl PartialEq for OwnedDisplayHandle {
    fn eq(&self, other: &Self) -> bool {
        match (self.display_handle(), other.display_handle()) {
            (Ok(lhs), Ok(rhs)) => lhs == rhs,
            _ => false,
        }
    }
}

impl Eq for OwnedDisplayHandle {}

/// Set through [`ActiveEventLoop::set_control_flow()`].
///
/// Indicates the desired behavior of the event loop after [`about_to_wait`] is called.
///
/// Defaults to [`Wait`].
///
/// [`Wait`]: Self::Wait
/// [`about_to_wait`]: crate::application::ApplicationHandler::about_to_wait
#[derive(Copy, Clone, Debug, Default, PartialEq, Eq, Hash)]
#[allow(clippy::exhaustive_enums)]
pub enum ControlFlow {
    /// When the current loop iteration finishes, immediately begin a new iteration regardless of
    /// whether or not new events are available to process.
    Poll,

    /// When the current loop iteration finishes, suspend the thread until another event arrives.
    #[default]
    Wait,

    /// When the current loop iteration finishes, suspend the thread until either another event
    /// arrives or the given time is reached.
    ///
    /// Useful for implementing efficient timers. Applications which want to render at the
    /// display's native refresh rate should instead use [`Poll`] and the VSync functionality
    /// of a graphics API to reduce odds of missed frames.
    ///
    /// [`Poll`]: Self::Poll
    WaitUntil(Instant),
}

impl ControlFlow {
    /// Creates a [`ControlFlow`] that waits until a timeout has expired.
    ///
    /// In most cases, this is set to [`WaitUntil`]. However, if the timeout overflows, it is
    /// instead set to [`Wait`].
    ///
    /// [`WaitUntil`]: Self::WaitUntil
    /// [`Wait`]: Self::Wait
    pub fn wait_duration(timeout: Duration) -> Self {
        match Instant::now().checked_add(timeout) {
            Some(instant) => Self::WaitUntil(instant),
            None => Self::Wait,
        }
    }
}

/// Control when device events are captured.
#[derive(Copy, Clone, PartialEq, Eq, PartialOrd, Ord, Hash, Debug, Default)]
#[cfg_attr(feature = "serde", derive(serde::Serialize, serde::Deserialize))]
#[allow(clippy::exhaustive_enums)]
pub enum DeviceEvents {
    /// Report device events regardless of window focus.
    Always,
    /// Only capture device events while the window is focused.
    #[default]
    WhenFocused,
    /// Never capture device events.
    Never,
}

/// A unique identifier of the wingy's async request.
///
/// This could be used to identify the async request once it's done
/// and a specific action must be taken.
///
/// One of the handling scenarios could be to maintain a working list
/// containing [`AsyncRequestSerial`] and some closure associated with it.
/// Then once event is arriving the working list is being traversed and a job
/// executed and removed from the list.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub struct AsyncRequestSerial {
    serial: usize,
}

impl AsyncRequestSerial {
    pub fn get() -> Self {
        static CURRENT_SERIAL: AtomicUsize = AtomicUsize::new(0);
        // NOTE: We rely on wrap around here, while the user may just request
        // in the loop usize::MAX times that's issue is considered on them.
        let serial = CURRENT_SERIAL.fetch_add(1, Ordering::Relaxed);
        Self { serial }
    }
}