Struct vimwiki::vendor::chrono::Date[−][src]

pub struct Date<Tz> where
    Tz: TimeZone,  { /* fields omitted */ }

Expand description

ISO 8601 calendar date with time zone.

This type should be considered ambiguous at best, due to the inherent lack of precision required for the time zone resolution. For serialization and deserialization uses, it is best to use NaiveDate instead. There are some guarantees on the usage of Date<Tz>:

If properly constructed via TimeZone::ymd and others without an error, the corresponding local date should exist for at least a moment. (It may still have a gap from the offset changes.)
The TimeZone is free to assign any Offset to the local date, as long as that offset did occur in given day. For example, if 2015-03-08T01:59-08:00 is followed by 2015-03-08T03:00-07:00, it may produce either 2015-03-08-08:00 or 2015-03-08-07:00 but not 2015-03-08+00:00 and others.
Once constructed as a full DateTime, DateTime::date and other associated methods should return those for the original Date. For example, if dt = tz.ymd(y,m,d).hms(h,n,s) were valid, dt.date() == tz.ymd(y,m,d).
The date is timezone-agnostic up to one day (i.e. practically always), so the local date and UTC date should be equal for most cases even though the raw calculation between NaiveDate and Duration may not.

Implementations

impl<Tz> Date<Tz> where
    Tz: TimeZone,

pub fn from_utc(date: NaiveDate, offset: <Tz as TimeZone>::Offset) -> Date<Tz>[src]

Makes a new Date with given UTC date and offset. The local date should be constructed via the TimeZone trait.

pub fn and_time(&self, time: NaiveTime) -> Option<DateTime<Tz>>[src]

Makes a new DateTime from the current date and given NaiveTime. The offset in the current date is preserved.

Panics on invalid datetime.

pub fn and_hms(&self, hour: u32, min: u32, sec: u32) -> DateTime<Tz>[src]

Makes a new DateTime from the current date, hour, minute and second. The offset in the current date is preserved.

Panics on invalid hour, minute and/or second.

pub fn and_hms_opt(&self, hour: u32, min: u32, sec: u32) -> Option<DateTime<Tz>>[src]

Makes a new DateTime from the current date, hour, minute and second. The offset in the current date is preserved.

Returns None on invalid hour, minute and/or second.

pub fn and_hms_milli(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    milli: u32
) -> DateTime<Tz>

Makes a new DateTime from the current date, hour, minute, second and millisecond. The millisecond part can exceed 1,000 in order to represent the leap second. The offset in the current date is preserved.

Panics on invalid hour, minute, second and/or millisecond.

pub fn and_hms_milli_opt(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    milli: u32
) -> Option<DateTime<Tz>>

Makes a new DateTime from the current date, hour, minute, second and millisecond. The millisecond part can exceed 1,000 in order to represent the leap second. The offset in the current date is preserved.

Returns None on invalid hour, minute, second and/or millisecond.

pub fn and_hms_micro(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    micro: u32
) -> DateTime<Tz>

Makes a new DateTime from the current date, hour, minute, second and microsecond. The microsecond part can exceed 1,000,000 in order to represent the leap second. The offset in the current date is preserved.

Panics on invalid hour, minute, second and/or microsecond.

pub fn and_hms_micro_opt(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    micro: u32
) -> Option<DateTime<Tz>>

Makes a new DateTime from the current date, hour, minute, second and microsecond. The microsecond part can exceed 1,000,000 in order to represent the leap second. The offset in the current date is preserved.

Returns None on invalid hour, minute, second and/or microsecond.

pub fn and_hms_nano(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    nano: u32
) -> DateTime<Tz>

Makes a new DateTime from the current date, hour, minute, second and nanosecond. The nanosecond part can exceed 1,000,000,000 in order to represent the leap second. The offset in the current date is preserved.

Panics on invalid hour, minute, second and/or nanosecond.

pub fn and_hms_nano_opt(
    &self, 
    hour: u32, 
    min: u32, 
    sec: u32, 
    nano: u32
) -> Option<DateTime<Tz>>

Makes a new DateTime from the current date, hour, minute, second and nanosecond. The nanosecond part can exceed 1,000,000,000 in order to represent the leap second. The offset in the current date is preserved.

Returns None on invalid hour, minute, second and/or nanosecond.

pub fn succ(&self) -> Date<Tz>[src]

Makes a new Date for the next date.

Panics when self is the last representable date.

pub fn succ_opt(&self) -> Option<Date<Tz>>[src]

Makes a new Date for the next date.

Returns None when self is the last representable date.

pub fn pred(&self) -> Date<Tz>[src]

Makes a new Date for the prior date.

Panics when self is the first representable date.

pub fn pred_opt(&self) -> Option<Date<Tz>>[src]

Makes a new Date for the prior date.

Returns None when self is the first representable date.

pub fn offset(&self) -> &<Tz as TimeZone>::Offset[src]

Retrieves an associated offset from UTC.

pub fn timezone(&self) -> Tz[src]

Retrieves an associated time zone.

pub fn with_timezone<Tz2>(&self, tz: &Tz2) -> Date<Tz2> where
    Tz2: TimeZone,

Changes the associated time zone. This does not change the actual Date (but will change the string representation).

pub fn checked_add_signed(self, rhs: Duration) -> Option<Date<Tz>>[src]

Adds given Duration to the current date.

Returns None when it will result in overflow.

pub fn checked_sub_signed(self, rhs: Duration) -> Option<Date<Tz>>[src]

Subtracts given Duration from the current date.

Returns None when it will result in overflow.

pub fn signed_duration_since<Tz2>(self, rhs: Date<Tz2>) -> Duration where
    Tz2: TimeZone,

Subtracts another Date from the current date. Returns a Duration of integral numbers.

This does not overflow or underflow at all, as all possible output fits in the range of Duration.

pub fn naive_utc(&self) -> NaiveDate[src]

Returns a view to the naive UTC date.

pub fn naive_local(&self) -> NaiveDate[src]

Returns a view to the naive local date.

This is technically the same as naive_utc because the offset is restricted to never exceed one day, but provided for the consistency.

impl<Tz> Date<Tz> where
    Tz: TimeZone,
    <Tz as TimeZone>::Offset: Display,

pub fn format_with_items<'a, I, B>(&self, items: I) -> DelayedFormat<I> where
    B: Borrow<Item<'a>>,
    I: Iterator<Item = B> + Clone,

Formats the date with the specified formatting items.

pub fn format(&self, fmt: &'a str) -> DelayedFormat<StrftimeItems<'a>>[src]

Formats the date with the specified format string. See the format::strftime module on the supported escape sequences.

Trait Implementations

impl<Tz> Add<Duration> for Date<Tz> where
    Tz: TimeZone,

type Output = Date<Tz>

The resulting type after applying the + operator.

pub fn add(self, rhs: Duration) -> Date<Tz>[src]

Performs the + operation. Read more

impl<Tz> Clone for Date<Tz> where
    Tz: Clone + TimeZone,
    <Tz as TimeZone>::Offset: Clone,

pub fn clone(&self) -> Date<Tz>[src]

Returns a copy of the value. Read more

fn clone_from(&mut self, source: &Self)1.0.0 [src]

Performs copy-assignment from source. Read more

impl<Tz> Datelike for Date<Tz> where
    Tz: TimeZone,

pub fn year(&self) -> i32[src]

Returns the year number in the calendar date.

pub fn month(&self) -> u32[src]

Returns the month number starting from 1. Read more

pub fn month0(&self) -> u32[src]

Returns the month number starting from 0. Read more

pub fn day(&self) -> u32[src]

Returns the day of month starting from 1. Read more

pub fn day0(&self) -> u32[src]

Returns the day of month starting from 0. Read more

pub fn ordinal(&self) -> u32[src]

Returns the day of year starting from 1. Read more

pub fn ordinal0(&self) -> u32[src]

Returns the day of year starting from 0. Read more

pub fn weekday(&self) -> Weekday[src]

Returns the day of week.

pub fn iso_week(&self) -> IsoWeek[src]

Returns the ISO week.

pub fn with_year(&self, year: i32) -> Option<Date<Tz>>[src]

Makes a new value with the year number changed. Read more

pub fn with_month(&self, month: u32) -> Option<Date<Tz>>[src]

Makes a new value with the month number (starting from 1) changed. Read more

pub fn with_month0(&self, month0: u32) -> Option<Date<Tz>>[src]

Makes a new value with the month number (starting from 0) changed. Read more

pub fn with_day(&self, day: u32) -> Option<Date<Tz>>[src]

Makes a new value with the day of month (starting from 1) changed. Read more

pub fn with_day0(&self, day0: u32) -> Option<Date<Tz>>[src]

Makes a new value with the day of month (starting from 0) changed. Read more

pub fn with_ordinal(&self, ordinal: u32) -> Option<Date<Tz>>[src]

Makes a new value with the day of year (starting from 1) changed. Read more

pub fn with_ordinal0(&self, ordinal0: u32) -> Option<Date<Tz>>[src]

Makes a new value with the day of year (starting from 0) changed. Read more

fn year_ce(&self) -> (bool, u32)[src]

Returns the absolute year number starting from 1 with a boolean flag, which is false when the year predates the epoch (BCE/BC) and true otherwise (CE/AD). Read more

fn num_days_from_ce(&self) -> i32[src]

Counts the days in the proleptic Gregorian calendar, with January 1, Year 1 (CE) as day 1. Read more

impl<Tz> Debug for Date<Tz> where
    Tz: TimeZone,

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>[src]

Formats the value using the given formatter. Read more

impl<Tz> Display for Date<Tz> where
    Tz: TimeZone,
    <Tz as TimeZone>::Offset: Display,

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>[src]

Formats the value using the given formatter. Read more

impl<Tz> Hash for Date<Tz> where
    Tz: TimeZone,

pub fn hash<H>(&self, state: &mut H) where
    H: Hasher,

Feeds this value into the given Hasher. Read more

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher,

1.3.0 [src]

Feeds a slice of this type into the given Hasher. Read more

impl<Tz> Ord for Date<Tz> where
    Tz: TimeZone,

pub fn cmp(&self, other: &Date<Tz>) -> Ordering[src]

This method returns an Ordering between self and other. Read more

#[must_use]
fn max(self, other: Self) -> Self

1.21.0 [src]

Compares and returns the maximum of two values. Read more

#[must_use]
fn min(self, other: Self) -> Self

1.21.0 [src]

Compares and returns the minimum of two values. Read more

#[must_use]
fn clamp(self, min: Self, max: Self) -> Self

1.50.0 [src]

Restrict a value to a certain interval. Read more

impl<Tz, Tz2> PartialEq<Date<Tz2>> for Date<Tz> where
    Tz: TimeZone,
    Tz2: TimeZone,

pub fn eq(&self, other: &Date<Tz2>) -> bool[src]

This method tests for self and other values to be equal, and is used by ==. Read more

#[must_use]
fn ne(&self, other: &Rhs) -> bool

1.0.0 [src]

This method tests for !=.

impl<Tz> PartialOrd<Date<Tz>> for Date<Tz> where
    Tz: TimeZone,

pub fn partial_cmp(&self, other: &Date<Tz>) -> Option<Ordering>[src]

This method returns an ordering between self and other values if one exists. Read more

#[must_use]
fn lt(&self, other: &Rhs) -> bool

1.0.0 [src]

This method tests less than (for self and other) and is used by the < operator. Read more

#[must_use]
fn le(&self, other: &Rhs) -> bool

1.0.0 [src]

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

#[must_use]
fn gt(&self, other: &Rhs) -> bool

1.0.0 [src]

This method tests greater than (for self and other) and is used by the > operator. Read more

#[must_use]
fn ge(&self, other: &Rhs) -> bool

1.0.0 [src]

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<Tz> Sub<Date<Tz>> for Date<Tz> where
    Tz: TimeZone,

type Output = Duration

The resulting type after applying the - operator.

pub fn sub(self, rhs: Date<Tz>) -> Duration[src]

Performs the - operation. Read more

impl<Tz> Sub<Duration> for Date<Tz> where
    Tz: TimeZone,

type Output = Date<Tz>

The resulting type after applying the - operator.

pub fn sub(self, rhs: Duration) -> Date<Tz>[src]

Performs the - operation. Read more

impl<Tz> Copy for Date<Tz> where
    Tz: TimeZone,
    <Tz as TimeZone>::Offset: Copy,

impl<Tz> Eq for Date<Tz> where
    Tz: TimeZone,

impl<Tz> Send for Date<Tz> where
    Tz: TimeZone,
    <Tz as TimeZone>::Offset: Send,

Auto Trait Implementations

impl<Tz> RefUnwindSafe for Date<Tz> where
    <Tz as TimeZone>::Offset: RefUnwindSafe,

impl<Tz> Sync for Date<Tz> where
    <Tz as TimeZone>::Offset: Sync,

impl<Tz> Unpin for Date<Tz> where
    <Tz as TimeZone>::Offset: Unpin,

impl<Tz> UnwindSafe for Date<Tz> where
    <Tz as TimeZone>::Offset: UnwindSafe,

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId[src]

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T where
    T: ?Sized,

pub fn borrow(&self) -> &T[src]

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T where
    T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T[src]

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T where
    Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> T where
    Self: Into<T>,

Converts self into a target type. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self> where
    Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self> where
    Self: Display,

Causes self to use its Display implementation when Debug-formatted. Read more

fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
    Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted. Read more

fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
    Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted. Read more

fn fmt_octal(self) -> FmtOctal<Self> where
    Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self> where
    Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted. Read more

fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
    Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted. Read more

fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
    Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted. Read more

impl<T> From<T> for T[src]

pub fn from(t: T) -> T[src]

Performs the conversion.

impl<T, U> Into<U> for T where
    U: From<T>,

pub fn into(self) -> U[src]

Performs the conversion.

impl<T> Pipe for T where
    T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
    R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
    R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
    Self: Borrow<B>,
    B: 'a + ?Sized,
    R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut B) -> R
) -> R where
    Self: BorrowMut<B>,
    B: 'a + ?Sized,
    R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
    Self: AsRef<U>,
    R: 'a,
    U: 'a + ?Sized,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
    Self: AsMut<U>,
    R: 'a,
    U: 'a + ?Sized,

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
    Self: Deref<Target = T>,
    T: 'a + ?Sized,
    R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut T) -> R
) -> R where
    Self: DerefMut<Target = T> + Deref,
    T: 'a + ?Sized,
    R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

impl<T> Pipe for T

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

impl<T> PipeAsRef for T

fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
    Self: AsRef<T>,
    T: 'a,
    R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
    Self: AsMut<T>,
    T: 'a,
    R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeBorrow for T

fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
    Self: Borrow<T>,
    T: 'a,
    R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_borrow_mut<'a, T, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut T) -> R
) -> R where
    Self: BorrowMut<T>,
    T: 'a,
    R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeDeref for T

fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
    Self: Deref,
    R: 'a,

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

fn pipe_deref_mut<'a, R>(
    &'a mut self, 
    func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
    Self: DerefMut,
    R: 'a,

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

impl<T> PipeRef for T

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
    R: 'a,

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
    R: 'a,

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
    Self: Borrow<B>,
    B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
    Self: BorrowMut<B>,
    B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
    Self: AsRef<R>,
    R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
    Self: AsMut<R>,
    R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
    Self: Deref<Target = T>,
    T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
    Self: DerefMut<Target = T> + Deref,
    T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
    Self: Borrow<B>,
    B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
    Self: BorrowMut<B>,
    B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
    Self: AsRef<R>,
    R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
    Self: AsMut<R>,
    R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self where
    Self: Deref<Target = T>,
    T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self where
    Self: DerefMut<Target = T> + Deref,
    T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

impl<T> Tap for T

fn tap<F, R>(self, func: F) -> Self where
    F: FnOnce(&Self) -> R,

Provides immutable access for inspection. Read more

fn tap_dbg<F, R>(self, func: F) -> Self where
    F: FnOnce(&Self) -> R,

Calls tap in debug builds, and does nothing in release builds.

fn tap_mut<F, R>(self, func: F) -> Self where
    F: FnOnce(&mut Self) -> R,

Provides mutable access for modification. Read more

fn tap_mut_dbg<F, R>(self, func: F) -> Self where
    F: FnOnce(&mut Self) -> R,

Calls tap_mut in debug builds, and does nothing in release builds.

impl<T, U> TapAsRef<U> for T where
    U: ?Sized,

fn tap_ref<F, R>(self, func: F) -> Self where
    Self: AsRef<T>,
    F: FnOnce(&T) -> R,

Provides immutable access to the reference for inspection.

fn tap_ref_dbg<F, R>(self, func: F) -> Self where
    Self: AsRef<T>,
    F: FnOnce(&T) -> R,

Calls tap_ref in debug builds, and does nothing in release builds.

fn tap_ref_mut<F, R>(self, func: F) -> Self where
    Self: AsMut<T>,
    F: FnOnce(&mut T) -> R,

Provides mutable access to the reference for modification.

fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
    Self: AsMut<T>,
    F: FnOnce(&mut T) -> R,

Calls tap_ref_mut in debug builds, and does nothing in release builds.

impl<T, U> TapBorrow<U> for T where
    U: ?Sized,

fn tap_borrow<F, R>(self, func: F) -> Self where
    Self: Borrow<T>,
    F: FnOnce(&T) -> R,

Provides immutable access to the borrow for inspection. Read more

fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
    Self: Borrow<T>,
    F: FnOnce(&T) -> R,

Calls tap_borrow in debug builds, and does nothing in release builds.

fn tap_borrow_mut<F, R>(self, func: F) -> Self where
    Self: BorrowMut<T>,
    F: FnOnce(&mut T) -> R,

Provides mutable access to the borrow for modification.

fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
    Self: BorrowMut<T>,
    F: FnOnce(&mut T) -> R,

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

impl<T> TapDeref for T

fn tap_deref<F, R>(self, func: F) -> Self where
    Self: Deref,
    F: FnOnce(&Self::Target) -> R,

Immutably dereferences self for inspection.

fn tap_deref_dbg<F, R>(self, func: F) -> Self where
    Self: Deref,
    F: FnOnce(&Self::Target) -> R,

Calls tap_deref in debug builds, and does nothing in release builds.

fn tap_deref_mut<F, R>(self, func: F) -> Self where
    Self: DerefMut,
    F: FnOnce(&mut Self::Target) -> R,

Mutably dereferences self for modification.

fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
    Self: DerefMut,
    F: FnOnce(&mut Self::Target) -> R,

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

impl<T> ToOwned for T where
    T: Clone,

type Owned = T

The resulting type after obtaining ownership.

pub fn to_owned(&self) -> T[src]

Creates owned data from borrowed data, usually by cloning. Read more

pub fn clone_into(&self, target: &mut T)[src]

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> ToString for T where
    T: Display + ?Sized,

pub default fn to_string(&self) -> String[src]

Converts the given value to a String. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error> where
    Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error> where
    Self: TryInto<T>,

Attempts to convert self into a target type. Read more

impl<T, U> TryFrom<U> for T where
    U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

Performs the conversion.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

Performs the conversion.