[−][src]Struct vega_lite_3::BaseMarkConfigBuilder
Builder for BaseMarkConfig
.
Methods
impl BaseMarkConfigBuilder
[src]
pub fn align<VALUE: Into<Align>>(&mut self, value: VALUE) -> &mut Self
[src]
The horizontal alignment of the text. One of "left"
, "right"
, "center"
.
pub fn angle<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The rotation angle of the text, in degrees.
pub fn baseline<VALUE: Into<TextBaseline>>(&mut self, value: VALUE) -> &mut Self
[src]
The vertical alignment of the text. One of "top"
, "middle"
, "bottom"
.
Default value: "middle"
pub fn corner_radius<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The radius in pixels of rounded rectangle corners.
Default value: 0
pub fn cursor<VALUE: Into<Cursor>>(&mut self, value: VALUE) -> &mut Self
[src]
The mouse cursor used over the mark. Any valid CSS cursor type can be used.
pub fn dir<VALUE: Into<Dir>>(&mut self, value: VALUE) -> &mut Self
[src]
The direction of the text. One of "ltr"
(left-to-right) or "rtl"
(right-to-left).
This property determines on which side is truncated in response to the limit parameter.
Default value: "ltr"
pub fn dx<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The horizontal offset, in pixels, between the text label and its anchor point. The offset is applied after rotation by the angle property.
pub fn dy<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The vertical offset, in pixels, between the text label and its anchor point. The offset is applied after rotation by the angle property.
pub fn ellipsis<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
The ellipsis string for text truncated in response to the limit parameter.
Default value: "…"
pub fn fill<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
Default Fill Color. This has higher precedence than config.color
Default value: (None)
pub fn fill_opacity<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The fill opacity (value between [0,1]).
Default value: 1
pub fn font<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
The typeface to set the text in (e.g., "Helvetica Neue"
).
pub fn font_size<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The font size, in pixels.
pub fn font_style<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
The font style (e.g., "italic"
).
pub fn font_weight<VALUE: Into<FontWeight>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The font weight.
This can be either a string (e.g "bold"
, "normal"
) or a number (100
, 200
, 300
,
..., 900
where "normal"
= 400
and "bold"
= 700
).
pub fn height<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
Height of the marks.
pub fn href<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
A URL to load upon mouse click. If defined, the mark acts as a hyperlink.
pub fn interpolate<VALUE: Into<Interpolate>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The line interpolation method to use for line and area marks. One of the following:
"linear"
: piecewise linear segments, as in a polyline."linear-closed"
: close the linear segments to form a polygon."step"
: alternate between horizontal and vertical segments, as in a step function."step-before"
: alternate between vertical and horizontal segments, as in a step function."step-after"
: alternate between horizontal and vertical segments, as in a step function."basis"
: a B-spline, with control point duplication on the ends."basis-open"
: an open B-spline; may not intersect the start or end."basis-closed"
: a closed B-spline, as in a loop."cardinal"
: a Cardinal spline, with control point duplication on the ends."cardinal-open"
: an open Cardinal spline; may not intersect the start or end, but will intersect other control points."cardinal-closed"
: a closed Cardinal spline, as in a loop."bundle"
: equivalent to basis, except the tension parameter is used to straighten the spline."monotone"
: cubic interpolation that preserves monotonicity in y.
pub fn limit<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The maximum length of the text mark in pixels. The text value will be automatically truncated if the rendered size exceeds the limit.
Default value: 0
, indicating no limit
pub fn opacity<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The overall opacity (value between [0,1]).
Default value: 0.7
for non-aggregate plots with point
, tick
, circle
, or
square
marks or layered bar
charts and 1
otherwise.
pub fn orient<VALUE: Into<Orientation>>(&mut self, value: VALUE) -> &mut Self
[src]
The orientation of a non-stacked bar, tick, area, and line charts. The value is either horizontal (default) or vertical.
- For bar, rule and tick, this determines whether the size of the bar and tick should be applied to x or y dimension.
- For area, this property determines the orient property of the Vega output.
- For line and trail marks, this property determines the sort order of the points in the
line
if
config.sortLineBy
is not specified. For stacked charts, this is always determined by the orientation of the stack; therefore explicitly specified value will be ignored.
pub fn radius<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
Polar coordinate radial offset, in pixels, of the text label from the origin determined
by the x
and y
properties.
pub fn shape<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
Shape of the point marks. Supported values include:
- plotting shapes:
"circle"
,"square"
,"cross"
,"diamond"
,"triangle-up"
,"triangle-down"
,"triangle-right"
, or"triangle-left"
. - the line symbol
"stroke"
- centered directional shapes
"arrow"
,"wedge"
, or"triangle"
- a custom SVG path string (For correct sizing, custom shape paths should be defined within a square bounding box with coordinates ranging from -1 to 1 along both the x and y dimensions.)
Default value: "circle"
pub fn size<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The pixel area each the point/circle/square. For example: in the case of circles, the radius is determined in part by the square root of the size value.
Default value: 30
pub fn stroke<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
Default Stroke Color. This has higher precedence than config.color
Default value: (None)
pub fn stroke_cap<VALUE: Into<StrokeCap>>(&mut self, value: VALUE) -> &mut Self
[src]
The stroke cap for line ending style. One of "butt"
, "round"
, or "square"
.
Default value: "square"
pub fn stroke_dash<VALUE: Into<Vec<f64>>>(&mut self, value: VALUE) -> &mut Self
[src]
An array of alternating stroke, space lengths for creating dashed or dotted lines.
pub fn stroke_dash_offset<VALUE: Into<f64>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The offset (in pixels) into which to begin drawing with the stroke dash array.
pub fn stroke_join<VALUE: Into<StrokeJoin>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The stroke line join method. One of "miter"
, "round"
or "bevel"
.
Default value: "miter"
pub fn stroke_miter_limit<VALUE: Into<f64>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The miter limit at which to bevel a line join.
pub fn stroke_opacity<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The stroke opacity (value between [0,1]).
Default value: 1
pub fn stroke_width<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
The stroke width, in pixels.
pub fn tension<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
Depending on the interpolation type, sets the tension parameter (for line and area marks).
pub fn text<VALUE: Into<String>>(&mut self, value: VALUE) -> &mut Self
[src]
Placeholder text if the text
channel is not specified
pub fn theta<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
Polar coordinate angle, in radians, of the text label from the origin determined by the
x
and y
properties. Values for theta
follow the same convention of arc
mark
startAngle
and endAngle
properties: angles are measured in radians, with 0
indicating "north".
pub fn tooltip<VALUE: Into<RemovableValue<Value>>>(
&mut self,
value: VALUE
) -> &mut Self
[src]
&mut self,
value: VALUE
) -> &mut Self
The tooltip text to show upon mouse hover.
pub fn width<VALUE: Into<f64>>(&mut self, value: VALUE) -> &mut Self
[src]
Width of the marks.
pub fn x<VALUE: Into<XUnion>>(&mut self, value: VALUE) -> &mut Self
[src]
X coordinates of the marks, or width of horizontal "bar"
and "area"
without specified
x2
or width
.
The value
of this channel can be a number or a string "width"
for the width of the
plot.
pub fn x2<VALUE: Into<XUnion>>(&mut self, value: VALUE) -> &mut Self
[src]
X2 coordinates for ranged "area"
, "bar"
, "rect"
, and "rule"
.
The value
of this channel can be a number or a string "width"
for the width of the
plot.
pub fn y<VALUE: Into<YUnion>>(&mut self, value: VALUE) -> &mut Self
[src]
Y coordinates of the marks, or height of vertical "bar"
and "area"
without specified
y2
or height
.
The value
of this channel can be a number or a string "height"
for the height of the
plot.
pub fn y2<VALUE: Into<XUnion>>(&mut self, value: VALUE) -> &mut Self
[src]
Y2 coordinates for ranged "area"
, "bar"
, "rect"
, and "rule"
.
The value
of this channel can be a number or a string "height"
for the height of the
plot.
pub fn build(&self) -> Result<BaseMarkConfig, String>
[src]
Trait Implementations
impl Clone for BaseMarkConfigBuilder
[src]
fn clone(&self) -> BaseMarkConfigBuilder
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Default for BaseMarkConfigBuilder
[src]
fn default() -> BaseMarkConfigBuilder
[src]
Auto Trait Implementations
impl RefUnwindSafe for BaseMarkConfigBuilder
impl Send for BaseMarkConfigBuilder
impl Sync for BaseMarkConfigBuilder
impl Unpin for BaseMarkConfigBuilder
impl UnwindSafe for BaseMarkConfigBuilder
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T
[src]
fn clone_into(&self, target: &mut T)
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,