[−][src]Trait ultraviolet::interp::Lerp
Pure linear interpolation, i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
Required methods
fn lerp(&self, end: Self, t: T) -> Self
Implementations on Foreign Types
impl Lerp<f32> for f32
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
Implementors
impl Lerp<f32> for Bivec2
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Bivec3
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Rotor2
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Rotor3
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Vec2
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Vec3
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32> for Vec4
[src]
fn lerp(&self, end: Self, t: f32) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Bivec2x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Bivec3x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Rotor2x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Rotor3x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for f32x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Vec2x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Vec3x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x4> for Vec4x4
[src]
fn lerp(&self, end: Self, t: f32x4) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Bivec2x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Bivec3x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Rotor2x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Rotor3x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for f32x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Vec2x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Vec3x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.
impl Lerp<f32x8> for Vec4x8
[src]
fn lerp(&self, end: Self, t: f32x8) -> Self
[src]
Linearly interpolate between self
and end
by t
between 0.0 and 1.0.
i.e. (1.0 - t) * self + (t) * end
.
For interpolating Rotor
s with linear interpolation, you almost certainly
want to normalize the returned Rotor
. For example,
let interpolated_rotor = rotor1.lerp(rotor2, 0.5).normalized();
For most cases (especially where perfomrance is the primary concern, like in
animation interpolation for games, this 'normalized lerp' or 'nlerp' is probably
what you want to use. However, there are situations in which you really want
the interpolation between two Rotor
s to be of constant angular velocity. In this
case, check out Slerp
.