Struct ublox::NavPosVelTimeFlags2
source · [−]pub struct NavPosVelTimeFlags2 { /* private fields */ }
Expand description
Additional flags for NavPosVelTime
Implementations
sourceimpl NavPosVelTimeFlags2
impl NavPosVelTimeFlags2
pub const RESERVED0: Self = Self{bits: 1 as u8,}
pub const RESERVED1: Self = Self{bits: (1 as u8) << 1u32,}
pub const RESERVED2: Self = Self{bits: (1 as u8) << 2u32,}
pub const RESERVED3: Self = Self{bits: (1 as u8) << 3u32,}
pub const RESERVED4: Self = Self{bits: (1 as u8) << 4u32,}
sourcepub const CONFIRMED_AVAI: Self = Self{bits: (1 as u8) << 5u32,}
pub const CONFIRMED_AVAI: Self = Self{bits: (1 as u8) << 5u32,}
1 = information about UTC Date and Time of Day validity confirmation is available. This flag is only supported in Protocol Versions 19.00, 19.10, 20.10, 20.20, 20.30, 22.00, 23.00, 23.01,27 and 28.
sourcepub const CONFIRMED_DATE: Self = Self{bits: (1 as u8) << 6u32,}
pub const CONFIRMED_DATE: Self = Self{bits: (1 as u8) << 6u32,}
1 = UTC Date validity could be confirmed (confirmed by using an additional independent source)
sourcepub const CONFIRMED_TIME: Self = Self{bits: (1 as u8) << 7u32,}
pub const CONFIRMED_TIME: Self = Self{bits: (1 as u8) << 7u32,}
1 = UTC Time of Day could be confirmed (confirmed by using an additional independent source)
sourcepub const fn from_bits(bits: u8) -> Option<Self>
pub const fn from_bits(bits: u8) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u8) -> Self
pub const fn from_bits_truncate(bits: u8) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u8) -> Self
pub const unsafe fn from_bits_unchecked(bits: u8) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for NavPosVelTimeFlags2
impl Binary for NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
The resulting type after applying the &
operator.
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourcefn bitor(self, other: NavPosVelTimeFlags2) -> Self
fn bitor(self, other: NavPosVelTimeFlags2) -> Self
Returns the union of the two sets of flags.
type Output = NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
The resulting type after applying the |
operator.
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
The resulting type after applying the ^
operator.
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for NavPosVelTimeFlags2
impl Clone for NavPosVelTimeFlags2
sourcefn clone(&self) -> NavPosVelTimeFlags2
fn clone(&self) -> NavPosVelTimeFlags2
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for NavPosVelTimeFlags2
impl Debug for NavPosVelTimeFlags2
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl Hash for NavPosVelTimeFlags2
impl Hash for NavPosVelTimeFlags2
sourceimpl LowerHex for NavPosVelTimeFlags2
impl LowerHex for NavPosVelTimeFlags2
sourceimpl Not for NavPosVelTimeFlags2
impl Not for NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
The resulting type after applying the !
operator.
sourceimpl Octal for NavPosVelTimeFlags2
impl Octal for NavPosVelTimeFlags2
sourceimpl Ord for NavPosVelTimeFlags2
impl Ord for NavPosVelTimeFlags2
sourcefn eq(&self, other: &NavPosVelTimeFlags2) -> bool
fn eq(&self, other: &NavPosVelTimeFlags2) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &NavPosVelTimeFlags2) -> bool
fn ne(&self, other: &NavPosVelTimeFlags2) -> bool
This method tests for !=
.
sourcefn partial_cmp(&self, other: &NavPosVelTimeFlags2) -> Option<Ordering>
fn partial_cmp(&self, other: &NavPosVelTimeFlags2) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
type Output = NavPosVelTimeFlags2
type Output = NavPosVelTimeFlags2
The resulting type after applying the -
operator.
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for NavPosVelTimeFlags2
impl UpperHex for NavPosVelTimeFlags2
impl Copy for NavPosVelTimeFlags2
impl Eq for NavPosVelTimeFlags2
impl StructuralEq for NavPosVelTimeFlags2
impl StructuralPartialEq for NavPosVelTimeFlags2
Auto Trait Implementations
impl RefUnwindSafe for NavPosVelTimeFlags2
impl Send for NavPosVelTimeFlags2
impl Sync for NavPosVelTimeFlags2
impl Unpin for NavPosVelTimeFlags2
impl UnwindSafe for NavPosVelTimeFlags2
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more