tycho_simulation/evm/

stream.rs

//! Builder for configuring a multi-protocol stream.
//!
//! Provides a builder for creating a multi-protocol stream that produces
//! protocol state update messages. It runs one synchronization worker per protocol
//! and a supervisor that aggregates updates, ensuring gap‑free streaming
//! and robust state tracking.
//!
//! ## Context
//!
//! This stream wraps a `TychoStream` from `tycho-client`. It decodes `FeedMessage`s
//! into protocol state updates. Internally, each protocol runs in its own
//! synchronization worker, and a supervisor aggregates their messages per block.
//!
//! ### Protocol Synchronization Worker
//! A synchronization worker runs the snapshot + delta protocol from `tycho-indexer`.
//! - It first downloads components and their snapshots.
//! - It then streams deltas.
//! - It reacts to new or paused components by pulling snapshots or removing them from the active
//!   set.
//!
//! Each worker emits snapshots and deltas to the supervisor.
//!
//! ### Stream Supervisor
//! The supervisor aggregates worker messages by block and assigns sync status.
//! - It ensures workers produce gap-free messages.
//! - It flags late workers as `Delayed`, and marks them `Stale` if they exceed `max_missed_blocks`.
//! - It marks workers with terminal errors as `Ended`.
//!
//! Aggregating by block adds small latency, since the supervisor waits briefly for
//! all workers to emit. This latency only applies to workers in `Ready` or `Delayed`.
//!
//! The stream ends only when **all** workers are `Stale` or `Ended`.
//!
//! ## Configuration
//!
//! The builder lets you customize:
//!
//! ### Protocols
//! Select which protocols to synchronize.
//!
//! ### Tokens & Minimum Token Quality
//! Provide token metadata up front so the decoder can initialize protocol states from startup
//! snapshots. `set_tokens` does not act as an ongoing filter — components arriving after startup
//! include their own token metadata. To restrict processing to specific tokens, apply that filter
//! in your consumer when reading `new_components`. New tokens arriving via stream deltas are added
//! automatically when their quality exceeds `min_token_quality`.
//!
//! ### StreamEndPolicy
//! Control when the stream ends based on worker states. By default, it ends when all
//! workers are `Stale` or `Ended`.
//!
//! ## Stream
//! The stream emits one protocol state update every `block_time`. Each update
//! reports protocol synchronization states and any changes.
//!
//! The `new_components` field lists newly deployed components and their tokens.
//!
//! The stream aims to run indefinitely. Internal retry and reconnect logic handle
//! most errors, so users should rarely need to restart it manually.
//!
//! ## Example
//! ```no_run
//! use tycho_common::models::Chain;
//! use tycho_simulation::evm::stream::ProtocolStreamBuilder;
//! use tycho_simulation::utils::load_all_tokens;
//! use futures::StreamExt;
//! use tycho_client::feed::component_tracker::ComponentFilter;
//! use tycho_simulation::evm::protocol::uniswap_v2::state::UniswapV2State;
//!
//! #[tokio::main]
//! async fn main() {
//!     let all_tokens = load_all_tokens(
//!         "tycho-beta.propellerheads.xyz",
//!         false,
//!         Some("sampletoken"),
//!         true,
//!         Chain::Ethereum,
//!         None,
//!         None,
//!     )
//!     .await
//!     .expect("Failed loading tokens");
//!
//!     let protocol_stream =
//!         ProtocolStreamBuilder::new("tycho-beta.propellerheads.xyz", Chain::Ethereum)
//!             .auth_key(Some("sampletoken".to_string()))
//!             .skip_state_decode_failures(true)
//!             .exchange::<UniswapV2State>(
//!                 "uniswap_v2", ComponentFilter::with_tvl_range(5.0, 10.0), None
//!             )
//!             .set_tokens(all_tokens)
//!             .await
//!             .build()
//!             .await
//!             .expect("Failed building protocol stream");
//!     tokio::pin!(protocol_stream);
//!
//!     // Loop through block updates
//!     while let Some(msg) = protocol_stream.next().await {
//!         dbg!(msg).expect("failed decoding");
//!     }
//! }
//! ```
use std::{
    collections::{HashMap, HashSet},
    sync::Arc,
    time,
};

use futures::{future::Either, stream, Stream, StreamExt};
use tokio_stream::wrappers::ReceiverStream;
use tracing::{debug, error, warn};
use tycho_client::{
    feed::{
        component_tracker::ComponentFilter, synchronizer::ComponentWithState, BlockHeader,
        BlockSynchronizerError, FeedMessage, SynchronizerState,
    },
    stream::{RetryConfiguration, StreamError, TychoStreamBuilder},
};
use tycho_common::{
    models::{token::Token, Chain},
    simulation::protocol_sim::ProtocolSim,
    traits::TxDeltaIndexer,
    Bytes,
};

use crate::{
    evm::{
        decoder::{StreamDecodeError, TychoStreamDecoder},
        override_stream::{self, StateOverrideProvider},
        pending::PendingBlockProcessor,
        protocol::{
            filters::uniswap_v4_non_angstrom_hook_pool_filter,
            native_wrapper::state::NativeWrapperState,
            uniswap_v4::hooks::hook_handler_creator::initialize_hook_handlers,
        },
    },
    protocol::{
        errors::InvalidSnapshotError,
        models::{DecoderContext, TryFromWithBlock, Update},
    },
    utils::default_blocklist,
};

const EXCHANGES_REQUIRING_FILTER: [&str; 5] =
    ["vm:balancer_v2", "fluid_v1", "erc4626", "ekubo_v3", "vm:curve"];

/// The client-side filter exchange `name` always gets, in addition to any filter the caller
/// provides.
///
/// `uniswap_v4_hooks`: without `ANGSTROM_API_KEY`, Angstrom swaps cannot be encoded (they carry
/// per-block attestations from the Angstrom API), so Angstrom pools are excluded up front rather
/// than failing every route that selects them at encoding time. A caller's own hook filter does
/// not replace this one: the encoder still has no key.
fn mandatory_filter_fn(name: &str) -> Option<fn(&ComponentWithState) -> bool> {
    if name == "uniswap_v4_hooks" && std::env::var("ANGSTROM_API_KEY").is_err() {
        warn!(
            "ANGSTROM_API_KEY is not set: excluding Angstrom pools from '{name}'. \
             Set the key to include them."
        );
        return Some(uniswap_v4_non_angstrom_hook_pool_filter);
    }
    None
}

#[derive(Default, Debug, Clone, Copy)]
pub enum StreamEndPolicy {
    /// End stream if all states are Stale or Ended (default)
    #[default]
    AllEndedOrStale,
    /// End stream if any protocol ended
    AnyEnded,
    /// End stream if any protocol ended or is stale
    AnyEndedOrStale,
    /// End stream if any protocol is stale
    AnyStale,
}

impl StreamEndPolicy {
    fn should_end<'a>(&self, states: impl IntoIterator<Item = &'a SynchronizerState>) -> bool {
        let mut it = states.into_iter();
        match self {
            StreamEndPolicy::AllEndedOrStale => false,
            StreamEndPolicy::AnyEnded => it.any(|s| matches!(s, SynchronizerState::Ended(_))),
            StreamEndPolicy::AnyStale => it.any(|s| matches!(s, SynchronizerState::Stale(_))),
            StreamEndPolicy::AnyEndedOrStale => {
                it.any(|s| matches!(s, SynchronizerState::Stale(_) | SynchronizerState::Ended(_)))
            }
        }
    }
}

/// Handle returned by [`ProtocolStreamBuilder::with_step_controller`] that gives external
/// control over when each buffered block is released for decoding.
///
/// Intended for complex test scenarios where the caller needs to observe what the next
/// block contains before allowing the decoder pipeline to process it.
///
/// ## Drop behaviour
///
/// Dropping this controller ungates the stream: the gating task detects the closed trigger
/// channel, forwards the currently-buffered block (if any), then continues passing subsequent
/// blocks through without waiting for triggers — exactly as if step-control had never been
/// enabled. The stream runs to its natural end.
pub struct BlockStepController {
    /// Sends a trigger signal to release the next buffered block.
    trigger_tx: tokio::sync::mpsc::UnboundedSender<()>,
    /// Watch channel containing the next buffered raw message, or `None` if no block is pending.
    peek_rx: tokio::sync::watch::Receiver<Option<FeedMessage<BlockHeader>>>,
}

impl BlockStepController {
    /// Releases the next buffered block for decoding and emission.
    ///
    /// Returns an error if the stream has already ended and the sender is disconnected.
    pub fn trigger_next_block(&self) -> Result<(), tokio::sync::mpsc::error::SendError<()>> {
        // Send a unit value on the trigger channel to unblock the gating task.
        self.trigger_tx.send(())
    }

    /// Returns the currently buffered block immediately, or `None` if no block is buffered yet.
    pub fn try_peek_next_block(&self) -> Option<FeedMessage<BlockHeader>> {
        self.peek_rx.borrow().clone()
    }

    /// Waits until a block is buffered and returns it without consuming it.
    ///
    /// Returns `None` only if the stream has ended and no further blocks will arrive.
    /// If a block is already buffered when this is called, it returns immediately.
    pub async fn peek_next_block(&self) -> Option<FeedMessage<BlockHeader>> {
        // Clone so we don't hold a mutable borrow on self; wait_for checks the current
        // value first, so this returns immediately if a block is already present.
        let mut rx = self.peek_rx.clone();
        let guard = rx
            .wait_for(|v| v.is_some())
            .await
            .ok()?;
        guard.clone()
    }
}

/// Builds and configures the multi protocol stream described in the [module-level docs](self).
///
/// See the module documentation for details on protocols, configuration options, and
/// stream behavior.
pub struct ProtocolStreamBuilder {
    decoder: TychoStreamDecoder<BlockHeader>,
    stream_builder: TychoStreamBuilder,
    stream_end_policy: StreamEndPolicy,
    chain: Chain,
    pending_indexers: HashMap<String, Box<dyn TxDeltaIndexer>>,
    /// Watch sender used to publish the currently-buffered raw block so the controller can peek
    /// at it before triggering. `Some` iff step-control mode is active.
    step_peek_tx: Option<tokio::sync::watch::Sender<Option<FeedMessage<BlockHeader>>>>,
    /// Receiver half of the trigger channel. Held here until `build()` / `build_with_pending()`
    /// transfers ownership to the gating task. `Some` iff step-control mode is active.
    step_trigger_rx: Option<tokio::sync::mpsc::UnboundedReceiver<()>>,
    /// State-override providers explicitly registered by the consumer, keyed by `protocol_system`.
    /// These take precedence over the built-in default registry and are installed onto the decoder
    /// at build time.
    override_providers: HashMap<String, Arc<dyn StateOverrideProvider>>,
    /// Names of all exchanges registered on the builder, used to decide which built-in override
    /// providers to auto-register at build time.
    registered_exchanges: HashSet<String>,
}

impl ProtocolStreamBuilder {
    /// Creates a new builder for a multi-protocol stream.
    ///
    /// The shipped pool blocklist is applied by default, excluding components known to break
    /// simulation. Use [`blocklist_components`](Self::blocklist_components) to exclude additional
    /// components.
    ///
    /// See the [module-level docs](self) for full details on stream behavior and configuration.
    pub fn new(tycho_url: &str, chain: Chain) -> Self {
        Self {
            decoder: TychoStreamDecoder::new(chain),
            stream_builder: TychoStreamBuilder::new(tycho_url, chain)
                .blocklisted_ids(default_blocklist()),
            stream_end_policy: StreamEndPolicy::default(),
            chain,
            pending_indexers: HashMap::new(),
            step_peek_tx: None,
            step_trigger_rx: None,
            override_providers: HashMap::new(),
            registered_exchanges: HashSet::new(),
        }
    }

    /// Adds a specific exchange to the stream.
    ///
    /// This configures the builder to include a new protocol synchronizer for `name`,
    /// filtering its components according to `filter` and optionally `filter_fn`.
    ///
    /// The type parameter `T` specifies the decoder type for this exchange. All
    /// component states for this exchange will be decoded into instances of `T`.
    ///
    /// # Parameters
    ///
    /// - `name`: The protocol or exchange name (e.g., `"uniswap_v4"`, `"vm:balancer_v2"`).
    /// - `filter`: Defines the set of components to include in the stream.
    /// - `filter_fn`: Optional custom filter function for client-side filtering of components not
    ///   expressible in `filter`.
    ///
    /// # Notes
    ///
    /// For certain protocols (e.g., `"uniswap_v4"`, `"vm:balancer_v2"`, `"vm:curve"`), omitting
    /// `filter_fn` may cause decoding errors or incorrect results. In these cases, a proper
    /// filter function is required to ensure correct decoding and quoting logic.
    pub fn exchange<T>(
        mut self,
        name: &str,
        filter: ComponentFilter,
        filter_fn: Option<fn(&ComponentWithState) -> bool>,
    ) -> Self
    where
        T: ProtocolSim
            + TryFromWithBlock<ComponentWithState, BlockHeader, Error = InvalidSnapshotError>
            + Send
            + 'static,
    {
        self.stream_builder = self
            .stream_builder
            .exchange(name, filter);
        self.registered_exchanges
            .insert(name.to_string());
        self.decoder.register_decoder::<T>(name);
        if let Some(predicate) = filter_fn {
            self.decoder
                .register_filter(name, predicate);
        }
        if let Some(predicate) = mandatory_filter_fn(name) {
            self.decoder
                .register_filter(name, predicate);
        }

        if EXCHANGES_REQUIRING_FILTER.contains(&name) && filter_fn.is_none() {
            warn!(
                "Warning: For exchange type '{}', it is necessary to set a filter function because not all pools are supported. See all filters at src/evm/protocol/filters.rs",
                name
            );
        }

        self
    }

    /// Adds a specific exchange to the stream with decoder context.
    ///
    /// This configures the builder to include a new protocol synchronizer for `name`,
    /// filtering its components according to `filter` and optionally `filter_fn`. It also registers
    /// the DecoderContext (this is useful to test protocols that are not live yet)
    ///
    /// The type parameter `T` specifies the decoder type for this exchange. All
    /// component states for this exchange will be decoded into instances of `T`.
    ///
    /// # Parameters
    ///
    /// - `name`: The protocol or exchange name (e.g., `"uniswap_v4"`, `"vm:balancer_v2"`).
    /// - `filter`: Defines the set of components to include in the stream.
    /// - `filter_fn`: Optional custom filter function for client-side filtering of components not
    ///   expressible in `filter`.
    /// - `decoder_context`: The decoder context for this exchange
    ///
    /// # Notes
    ///
    /// For certain protocols (e.g., `"uniswap_v4"`, `"vm:balancer_v2"`, `"vm:curve"`), omitting
    /// `filter_fn` may cause decoding errors or incorrect results. In these cases, a proper
    /// filter function is required to ensure correct decoding and quoting logic.
    pub fn exchange_with_decoder_context<T>(
        mut self,
        name: &str,
        filter: ComponentFilter,
        filter_fn: Option<fn(&ComponentWithState) -> bool>,
        decoder_context: DecoderContext,
    ) -> Self
    where
        T: ProtocolSim
            + TryFromWithBlock<ComponentWithState, BlockHeader, Error = InvalidSnapshotError>
            + Send
            + 'static,
    {
        self.stream_builder = self
            .stream_builder
            .exchange(name, filter);
        self.registered_exchanges
            .insert(name.to_string());
        self.decoder
            .register_decoder_with_context::<T>(name, decoder_context);
        if let Some(predicate) = filter_fn {
            self.decoder
                .register_filter(name, predicate);
        }
        if let Some(predicate) = mandatory_filter_fn(name) {
            self.decoder
                .register_filter(name, predicate);
        }

        if EXCHANGES_REQUIRING_FILTER.contains(&name) && filter_fn.is_none() {
            warn!(
                "Warning: For exchange type '{}', it is necessary to set a filter function because not all pools are supported. See all filters at src/evm/protocol/filters.rs",
                name
            );
        }

        self
    }

    /// Sets the block time interval for the stream.
    ///
    /// This controls how often the stream produces updates.
    pub fn block_time(mut self, block_time: u64) -> Self {
        self.stream_builder = self
            .stream_builder
            .block_time(block_time);
        self
    }

    /// Sets the network operation timeout (deprecated).
    ///
    /// Use [`latency_buffer()`](Self::latency_buffer) instead for controlling latency.
    /// This method is retained for backwards compatibility.
    #[deprecated = "Use latency_buffer instead"]
    pub fn timeout(mut self, timeout: u64) -> Self {
        self.stream_builder = self.stream_builder.timeout(timeout);
        self
    }

    /// Sets the latency buffer to aggregate same-block messages.
    ///
    /// This allows the supervisor to wait a short interval for all synchronizers to emit
    /// before aggregating.
    pub fn latency_buffer(mut self, timeout: u64) -> Self {
        self.stream_builder = self.stream_builder.timeout(timeout);
        self
    }

    /// Sets the maximum number of blocks a synchronizer may miss before being marked as `Stale`.
    pub fn max_missed_blocks(mut self, n: u64) -> Self {
        self.stream_builder = self.stream_builder.max_missed_blocks(n);
        self
    }

    /// Sets how long a synchronizer may take to process the initial message.
    ///
    /// Useful for data-intensive protocols where startup decoding takes longer.
    pub fn startup_timeout(mut self, timeout: time::Duration) -> Self {
        self.stream_builder = self
            .stream_builder
            .startup_timeout(timeout);
        self
    }

    /// Configures the stream to exclude state updates.
    ///
    /// This reduces bandwidth and decoding workload if protocol state is not of
    /// interest (e.g. only process new tokens).
    pub fn no_state(mut self, no_state: bool) -> Self {
        self.stream_builder = self.stream_builder.no_state(no_state);
        self
    }

    /// Sets the API key for authenticating with the Tycho server.
    pub fn auth_key(mut self, auth_key: Option<String>) -> Self {
        self.stream_builder = self.stream_builder.auth_key(auth_key);
        self
    }

    /// Adds client-metadata entries forwarded to the server in the `X-Tycho-Client-Metadata`
    /// header.
    ///
    /// See [`TychoStreamBuilder::add_client_metadata`]. Values are self-reported and may surface in
    /// the server's metrics and logs — do not include secrets or personally identifiable
    /// information.
    pub fn add_client_metadata<I, K, V>(mut self, metadata: I) -> Self
    where
        I: IntoIterator<Item = (K, V)>,
        K: Into<String>,
        V: Into<String>,
    {
        self.stream_builder = self
            .stream_builder
            .add_client_metadata(metadata);
        self
    }

    /// Disables TLS/ SSL for the connection, using http and ws protocols.
    ///
    /// This is not recommended for production use.
    pub fn no_tls(mut self, no_tls: bool) -> Self {
        self.stream_builder = self.stream_builder.no_tls(no_tls);
        self
    }

    /// Disable compression for the connection.
    pub fn disable_compression(mut self) -> Self {
        self.stream_builder = self
            .stream_builder
            .disable_compression();
        self
    }

    /// Enables partial block updates (flashblocks).
    pub fn enable_partial_blocks(mut self) -> Self {
        self.stream_builder = self
            .stream_builder
            .enable_partial_blocks();
        self
    }

    /// Sets the number of deltas buffered for each underlying Tycho WebSocket subscription.
    ///
    /// See [`TychoStreamBuilder::subscription_buffer_size`].
    pub fn subscription_buffer_size(mut self, subscription_buffer_size: usize) -> Self {
        self.stream_builder = self
            .stream_builder
            .subscription_buffer_size(subscription_buffer_size);
        self
    }

    /// Exclude additional component IDs from all registered exchanges.
    ///
    /// These IDs are added to the shipped blocklist that is already applied by default (see
    /// [`new`](Self::new)).
    pub fn blocklist_components(mut self, ids: HashSet<String>) -> Self {
        if !ids.is_empty() {
            tracing::info!("Blocklisting {} components", ids.len());
            self.stream_builder = self.stream_builder.blocklisted_ids(ids);
        }
        self
    }

    /// Sets the stream end policy.
    ///
    /// Controls when the stream should stop based on synchronizer states.
    ///
    /// ## Note
    /// The stream always ends latest if all protocols are stale or ended independent of
    /// this configuration. This allows you to end the stream earlier than that.
    ///
    /// See [self::StreamEndPolicy] for possible configuration options.
    pub fn stream_end_policy(mut self, stream_end_policy: StreamEndPolicy) -> Self {
        self.stream_end_policy = stream_end_policy;
        self
    }

    /// Provides token metadata used to decode startup snapshots and initialize protocol states.
    ///
    /// This is not a stream filter — components arriving after startup include their own token
    /// metadata. To restrict to specific tokens, filter in your consumer logic. New tokens
    /// arriving via stream deltas are added automatically if they meet the quality threshold.
    pub async fn set_tokens(self, tokens: HashMap<Bytes, Token>) -> Self {
        self.decoder.set_tokens(tokens).await;
        self
    }

    /// Skips decoding errors for component state updates.
    ///
    /// Allows the stream to continue processing even if some states fail to decode,
    /// logging a warning instead of panicking.
    pub fn skip_state_decode_failures(mut self, skip: bool) -> Self {
        self.decoder
            .skip_state_decode_failures(skip);
        self
    }

    /// Sets the minimum token quality for tokens added via the stream.
    ///
    /// Tokens arriving in stream deltas below this threshold are ignored. Defaults to 100.
    /// Set this to the same value used in [`load_all_tokens()`](crate::utils::load_all_tokens) to
    /// apply consistent filtering.
    pub fn min_token_quality(mut self, quality: u32) -> Self {
        self.decoder.min_token_quality(quality);
        self
    }

    /// Configures the retry policy for websocket reconnects.
    pub fn websocket_retry_config(mut self, config: &RetryConfiguration) -> Self {
        self.stream_builder = self
            .stream_builder
            .websockets_retry_config(config);
        self
    }

    /// Configures the retry policy for state synchronization.
    pub fn state_synchronizer_retry_config(mut self, config: &RetryConfiguration) -> Self {
        self.stream_builder = self
            .stream_builder
            .state_synchronizer_retry_config(config);
        self
    }

    pub fn get_decoder(&self) -> &TychoStreamDecoder<BlockHeader> {
        &self.decoder
    }

    /// Registers a [`TxDeltaIndexer`] for ephemeral pending-block simulation.
    ///
    /// The indexer is associated with `extractor` (the protocol synchronizer name, e.g.
    /// `"uniswap_v3"`). Use [`build_with_pending`](Self::build_with_pending) to obtain both
    /// the confirmed stream and the pending processor.
    ///
    /// The exchange must decode into a state whose `delta_transition` can rebuild it from the
    /// `state_deltas` the indexer produces, because that is all
    /// [`apply_deltas_ephemeral`](crate::evm::decoder::TychoStreamDecoder::apply_deltas_ephemeral)
    /// applies. Native and hybrid states qualify; the generic VM adapter does not, because it
    /// re-reads pool state from the VM database — an indexer registered for one still gets its
    /// balance and block-environment attributes applied, but every storage-derived value stays at
    /// the confirmed block, with no error.
    pub fn with_pending_indexer(
        mut self,
        extractor: &str,
        indexer: Box<dyn TxDeltaIndexer>,
    ) -> Result<Self, StreamError> {
        self.pending_indexers
            .insert(extractor.to_string(), indexer);
        Ok(self)
    }

    /// Enables controlled-step mode for testing.
    ///
    /// Returns a [`BlockStepController`] that lets the caller decide when each buffered block
    /// is released for decoding. Call this before [`build`](Self::build) or
    /// [`build_with_pending`](Self::build_with_pending) — both detect and wire up the gating
    /// automatically.
    ///
    /// In production code, do not call this method; the stream runs at full speed.
    pub fn with_step_controller(mut self) -> (Self, BlockStepController) {
        let (trigger_tx, trigger_rx) = tokio::sync::mpsc::unbounded_channel::<()>();
        let (peek_tx, peek_rx) =
            tokio::sync::watch::channel::<Option<FeedMessage<BlockHeader>>>(None);

        self.step_peek_tx = Some(peek_tx);
        self.step_trigger_rx = Some(trigger_rx);

        let controller = BlockStepController { trigger_tx, peek_rx };
        (self, controller)
    }

    /// Spawns a background task that gates `FeedMessage` delivery.
    ///
    /// The task buffers each incoming message, publishes it to `peek_tx` so the
    /// [`BlockStepController`] can inspect it, waits for a trigger, then forwards the message to
    /// `output_tx` for the decode pipeline. If `advance_tx` is `Some`, a clone of the message is
    /// also forwarded there (used by the pending-processor path) before the decode step.
    /// When the input channel closes or a terminal error is received according to
    /// `stream_end_policy`, the task exits and all output channels are dropped.
    fn run_gating_task(
        raw_rx: tokio::sync::mpsc::Receiver<
            Result<FeedMessage<BlockHeader>, BlockSynchronizerError>,
        >,
        mut trigger_rx: tokio::sync::mpsc::UnboundedReceiver<()>,
        peek_tx: tokio::sync::watch::Sender<Option<FeedMessage<BlockHeader>>>,
        output_tx: tokio::sync::mpsc::Sender<FeedMessage<BlockHeader>>,
        stream_end_policy: StreamEndPolicy,
    ) {
        tokio::spawn(async move {
            let mut raw_stream = ReceiverStream::new(raw_rx);
            loop {
                let msg = match raw_stream.next().await {
                    Some(Ok(msg)) => msg,
                    Some(Err(e)) => {
                        error!("Block stream ended with terminal error: {e}");
                        break;
                    }
                    None => break,
                };

                if stream_end_policy.should_end(msg.sync_states.values()) {
                    error!(
                        "Block stream ended due to {:?}: {:?}",
                        stream_end_policy, msg.sync_states
                    );
                    break;
                }

                // Publish the buffered message so the caller can peek before triggering.
                let _ = peek_tx.send(Some(msg.clone()));

                // Block until the controller fires trigger_next_block(), or until it is dropped.
                if trigger_rx.recv().await.is_none() {
                    // Controller dropped — forward the buffered message and drain the rest
                    // without gating, so the stream continues to its natural end.
                    let _ = peek_tx.send(None);
                    if output_tx.send(msg).await.is_err() {
                        break;
                    }
                    while let Some(item) = raw_stream.next().await {
                        let Ok(msg) = item else { break };
                        if stream_end_policy.should_end(msg.sync_states.values()) {
                            break;
                        }
                        if output_tx.send(msg).await.is_err() {
                            break;
                        }
                    }
                    break;
                }

                // Clear the peek slot before decoding so callers see None between blocks.
                let _ = peek_tx.send(None);

                if output_tx.send(msg).await.is_err() {
                    break;
                }
            }
        });
    }

    /// Registers `provider` as the live override source for `protocol_system`.
    ///
    /// Explicit registrations take precedence over the built-in default registry, so this is how
    /// you swap a venue (e.g. `vm:bopamm`) onto a different provider. Registering the same provider
    /// for several protocols is cheap — it is shared via `Arc`, not duplicated.
    pub fn with_override_provider(
        mut self,
        protocol_system: impl Into<String>,
        provider: Arc<dyn StateOverrideProvider>,
    ) -> Self {
        self.override_providers
            .insert(protocol_system.into(), provider);
        self
    }

    /// Installs override providers onto the decoder before the stream is built.
    ///
    /// Explicit consumer registrations win; the built-in default registry (see
    /// [`default_override_providers`](crate::evm::override_stream::default_override_providers))
    /// then fills every remaining protocol it can serve.
    fn install_override_providers(&mut self) {
        let explicit = std::mem::take(&mut self.override_providers);
        // Protocols eligible for a built-in default provider: registered exchanges not explicitly
        // overridden by the consumer.
        let uncovered = self
            .registered_exchanges
            .clone()
            .into_iter()
            .filter(|exchange| !explicit.contains_key(exchange));
        let defaults = override_stream::default_override_providers(uncovered);
        for (protocol_system, provider) in defaults.into_iter().chain(explicit) {
            self.decoder
                .set_override_provider(protocol_system, provider);
        }
    }

    /// Builds the confirmed protocol stream and a [`PendingBlockProcessor`] that stays
    /// in sync with it automatically.
    ///
    /// The stream pipeline forwards every confirmed [`FeedMessage`] to the processor via an
    /// internal unbounded channel — it never blocks waiting for the consumer. The consumer
    /// owns the returned `PendingBlockProcessor` exclusively and may wrap it in whatever
    /// synchronisation primitive suits their use case (e.g. `Mutex` for shared access,
    /// nothing for single-threaded use).
    ///
    /// Call [`generate_pending_update`](PendingBlockProcessor::generate_pending_update) to
    /// simulate a candidate bundle; it drains the channel automatically before computing.
    pub async fn build_with_pending(
        mut self,
    ) -> Result<
        (impl Stream<Item = Result<Update, StreamDecodeError>>, PendingBlockProcessor),
        StreamError,
    > {
        initialize_hook_handlers().map_err(|e| {
            StreamError::SetUpError(format!("Error initializing hook handlers: {e:?}"))
        })?;
        self.install_override_providers();
        let (_, rx) = self.stream_builder.build().await?;
        let decoder = Arc::new(self.decoder);

        let (advance_tx, advance_rx) =
            tokio::sync::mpsc::unbounded_channel::<FeedMessage<BlockHeader>>();
        let pending = PendingBlockProcessor::new(
            self.pending_indexers,
            decoder.clone(),
            self.chain,
            advance_rx,
        );

        let chain = self.chain;
        let stream_end_policy = self.stream_end_policy;

        let decode_stream: Box<dyn Stream<Item = FeedMessage<BlockHeader>> + Send + Unpin> =
            if let (Some(peek_tx), Some(trigger_rx)) = (self.step_peek_tx, self.step_trigger_rx) {
                let (gated_tx, gated_rx) =
                    tokio::sync::mpsc::channel::<FeedMessage<BlockHeader>>(1);
                Self::run_gating_task(rx, trigger_rx, peek_tx, gated_tx, stream_end_policy);
                Box::new(ReceiverStream::new(gated_rx))
            } else {
                let normal = ReceiverStream::new(rx)
                    .take_while(move |msg| match msg {
                        Ok(msg) => {
                            let states = msg.sync_states.values();
                            if stream_end_policy.should_end(states) {
                                error!(
                                    "Block stream ended due to {:?}: {:?}",
                                    stream_end_policy, msg.sync_states
                                );
                                futures::future::ready(false)
                            } else {
                                futures::future::ready(true)
                            }
                        }
                        Err(e) => {
                            error!("Block stream ended with terminal error: {e}");
                            futures::future::ready(false)
                        }
                    })
                    .map(|msg| msg.expect("Safe since stream ends if we receive an error"));
                Box::new(Box::pin(normal))
            };

        let stream = Box::pin(decode_stream.then({
            let decoder = decoder.clone();
            move |msg| {
                let decoder = decoder.clone();
                let advance_tx = advance_tx.clone();
                async move {
                    let _ = advance_tx.send(msg.clone());
                    decoder.decode(&msg).await.map_err(|e| {
                        debug!(msg=?msg, "Decode error: {}", e);
                        e
                    })
                }
            }
        }));
        let stream = inject_native_wrapper(stream, chain);
        Ok((stream, pending))
    }

    /// Builds and returns the configured protocol stream.
    ///
    /// See the module-level docs for details on stream behavior and emitted messages.
    /// This method applies all builder settings and starts the stream.
    pub async fn build(
        mut self,
    ) -> Result<impl Stream<Item = Result<Update, StreamDecodeError>>, StreamError> {
        initialize_hook_handlers().map_err(|e| {
            StreamError::SetUpError(format!("Error initializing hook handlers: {e:?}"))
        })?;
        self.install_override_providers();
        let (_, rx) = self.stream_builder.build().await?;
        let decoder = Arc::new(self.decoder);
        let chain = self.chain;
        let stream_end_policy = self.stream_end_policy;

        let decode_stream: Box<dyn Stream<Item = FeedMessage<BlockHeader>> + Send + Unpin> =
            if let (Some(peek_tx), Some(trigger_rx)) = (self.step_peek_tx, self.step_trigger_rx) {
                let (gated_tx, gated_rx) =
                    tokio::sync::mpsc::channel::<FeedMessage<BlockHeader>>(1);
                Self::run_gating_task(rx, trigger_rx, peek_tx, gated_tx, stream_end_policy);
                Box::new(ReceiverStream::new(gated_rx))
            } else {
                let normal = ReceiverStream::new(rx)
                    .take_while(move |msg| match msg {
                        Ok(msg) => {
                            let states = msg.sync_states.values();
                            if stream_end_policy.should_end(states) {
                                error!(
                                    "Block stream ended due to {:?}: {:?}",
                                    stream_end_policy, msg.sync_states
                                );
                                futures::future::ready(false)
                            } else {
                                futures::future::ready(true)
                            }
                        }
                        Err(e) => {
                            error!("Block stream ended with terminal error: {e}");
                            futures::future::ready(false)
                        }
                    })
                    .map(|msg| msg.expect("Safe since stream ends if we receive an error"));
                Box::new(Box::pin(normal))
            };

        let stream = Box::pin(decode_stream.then({
            let decoder = decoder.clone();
            move |msg| {
                let decoder = decoder.clone();
                async move {
                    decoder.decode(&msg).await.map_err(|e| {
                        debug!(msg=?msg, "Decode error: {}", e);
                        e
                    })
                }
            }
        }));
        let stream = inject_native_wrapper(stream, chain);
        Ok(stream)
    }
}

/// Wraps a decoded protocol stream to inject a `NativeWrapperState` component
/// on the first successful update.
///
/// Skips injection for chains where the native and wrapped-native tokens share
/// the same address (e.g. Starknet).
fn inject_native_wrapper(
    inner: impl Stream<Item = Result<Update, StreamDecodeError>> + Unpin + Send + 'static,
    chain: Chain,
) -> impl Stream<Item = Result<Update, StreamDecodeError>> + Send {
    let has_distinct_wrapper = chain.native_token().address != chain.wrapped_native_token().address;
    if !has_distinct_wrapper {
        return Either::Left(inner);
    }

    Either::Right(
        stream::once(async move {
            let mut inner = inner;
            let first = inner.next().await;
            let modified = first.into_iter().map(move |result| {
                result.map(|mut update| {
                    let component = NativeWrapperState::component(chain);
                    let id = component.id.to_string();
                    update
                        .new_pairs
                        .insert(id.clone(), component);
                    update
                        .states
                        .insert(id, Box::new(NativeWrapperState::new(chain)));
                    debug!("Injected native_wrapper component for {chain}");
                    update
                })
            });
            stream::iter(modified).chain(inner)
        })
        .flatten(),
    )
}

#[cfg(test)]
mod tests {
    use std::collections::HashMap;

    use futures::{stream, StreamExt};
    use tycho_common::models::Chain;

    use super::*;
    use crate::protocol::models::Update;

    fn empty_update(block: u64) -> Update {
        Update::new(block, HashMap::new(), HashMap::new())
    }

    #[tokio::test]
    async fn test_inject_native_wrapper_first_message_only() {
        let updates = vec![Ok(empty_update(1)), Ok(empty_update(2)), Ok(empty_update(3))];
        let input = stream::iter(updates);

        let results: Vec<_> = inject_native_wrapper(input, Chain::Ethereum)
            .collect()
            .await;

        assert_eq!(results.len(), 3);

        let expected_id = NativeWrapperState::component(Chain::Ethereum)
            .id
            .to_string();

        let first = results[0]
            .as_ref()
            .expect("first update ok");
        assert!(
            first
                .new_pairs
                .contains_key(&expected_id),
            "first message should have native_wrapper component"
        );
        assert!(
            first.states.contains_key(&expected_id),
            "first message should have native_wrapper state"
        );

        let second = results[1]
            .as_ref()
            .expect("second update ok");
        assert!(
            !second
                .new_pairs
                .contains_key(&expected_id),
            "second message should NOT have native_wrapper component"
        );
        assert!(
            !second.states.contains_key(&expected_id),
            "second message should NOT have native_wrapper state"
        );
    }

    /// Verifies that `with_step_controller` returns both a modified builder and a controller.
    ///
    /// This test only checks that the builder method is callable and that the returned controller
    /// compiles — it does not start any network connection.
    #[tokio::test]
    async fn test_with_step_controller_returns_controller() {
        let builder = ProtocolStreamBuilder::new("tycho-beta.propellerheads.xyz", Chain::Ethereum);
        let (_builder, controller) = builder.with_step_controller();
        // The controller was successfully returned — verifying the public API is callable.
        drop(controller);
    }

    #[tokio::test]
    async fn test_subscription_buffer_size_forwards_zero_rejection() {
        let error = ProtocolStreamBuilder::new("not a valid endpoint", Chain::Ethereum)
            .subscription_buffer_size(0)
            .build()
            .await;

        let Err(error) = error else {
            panic!("a zero subscription buffer size must be rejected during setup");
        };

        assert!(
            error
                .to_string()
                .contains("subscription buffer size must be greater than zero"),
            "the underlying Tycho stream builder should return the configuration error: {error}"
        );
    }

    #[tokio::test]
    async fn test_subscription_buffer_size_forwards_upper_bound_rejection() {
        let error = ProtocolStreamBuilder::new("not a valid endpoint", Chain::Ethereum)
            .subscription_buffer_size(usize::MAX)
            .build()
            .await;

        let Err(error) = error else {
            panic!("an oversized subscription buffer size must be rejected during setup");
        };

        assert!(
            error
                .to_string()
                .contains("subscription buffer size must not exceed"),
            "the underlying Tycho stream builder should return the configuration error: {error}"
        );
    }

    /// Connects to a live Tycho instance, verifies that the stream blocks until
    /// `trigger_next_block` is called, and that `peek_next_block` exposes the buffered message.
    #[ignore = "requires live Tycho connection (TYCHO_AUTH_TOKEN env var)"]
    #[tokio::test]
    async fn test_step_controller_trigger_releases_block() {
        use std::{env, time::Duration};

        use crate::evm::protocol::uniswap_v2::state::UniswapV2State;

        let auth = env::var("TYCHO_AUTH_TOKEN").expect("TYCHO_AUTH_TOKEN must be set");

        // Track a single well-known pool to minimise startup latency.
        let usdc_weth_v2 = "0xb4e16d0168e52d35cacd2c6185b44281ec28c9dc".to_string();
        let (builder, controller) =
            ProtocolStreamBuilder::new("tycho-beta.propellerheads.xyz", Chain::Ethereum)
                .auth_key(Some(auth))
                .exchange::<UniswapV2State>(
                    "uniswap_v2",
                    ComponentFilter::Ids(vec![usdc_weth_v2]),
                    None,
                )
                .with_step_controller();

        let (stream, _pending) = builder
            .build_with_pending()
            .await
            .expect("build_with_pending failed");
        tokio::pin!(stream);

        // Wait up to 60 s for the first block to arrive in the gating buffer.
        let peeked = tokio::time::timeout(Duration::from_secs(60), controller.peek_next_block())
            .await
            .expect("timed out waiting for first block to buffer")
            .expect("stream ended before a block arrived");

        assert!(!peeked.sync_states.is_empty(), "peeked block should carry sync states");

        // Stream must be empty before we trigger — the gating task should be holding the block.
        let pre_trigger = tokio::time::timeout(Duration::from_millis(200), stream.next()).await;
        assert!(
            pre_trigger.is_err(),
            "stream should be blocked before trigger_next_block, got an item"
        );

        // Release the block.
        controller
            .trigger_next_block()
            .expect("trigger_next_block failed");

        // Stream should now yield the decoded update within one block time.
        let update = tokio::time::timeout(Duration::from_secs(30), stream.next())
            .await
            .expect("timed out waiting for update after trigger")
            .expect("stream ended unexpectedly");

        assert!(update.is_ok(), "decoded update should be Ok, got: {:?}", update);
    }
}