tycho_client/feed/

mod.rs

use std::{
    collections::{HashMap, HashSet},
    fmt::{Display, Formatter},
    time::Duration,
};

use chrono::{Duration as ChronoDuration, Local, NaiveDateTime};
use futures03::{future::join_all, stream::FuturesUnordered, FutureExt, StreamExt};
use serde::{Deserialize, Serialize};
use thiserror::Error;
use tokio::{
    sync::{
        mpsc::{self, Receiver},
        oneshot,
    },
    task::JoinHandle,
    time::timeout,
};
use tracing::{debug, error, info, trace, warn};
use tycho_common::{
    display::opt,
    models::{blockchain::BlockAggregatedChanges, ExtractorIdentity},
    Bytes,
};

use crate::feed::{
    block_history::{BlockHistory, BlockHistoryError, BlockPosition},
    synchronizer::{StateSyncMessage, StateSynchronizer, SyncResult, SynchronizerError},
};

mod block_history;
pub mod component_tracker;
pub mod dto;
pub mod synchronizer;

/// Number of block headers retained by the `BlockHistory` ring buffer. Bounds how deep a revert
/// can unwind before the fork point is evicted. Used both on startup and on reinitialization so
/// the retained depth stays consistent across an `Advanced`-triggered reinit.
const BLOCK_HISTORY_SIZE: usize = 15;

/// A trait representing a minimal interface for types that behave like a block header.
///
/// This abstraction allows working with either full block headers (`BlockHeader`)
/// or simplified structures that only provide a timestamp (e.g., for RFQ logic).
pub trait HeaderLike {
    fn block(self) -> Option<BlockHeader>;
    fn block_number_or_timestamp(self) -> u64;
}

#[derive(Debug, Clone, PartialEq, Default, Serialize, Deserialize, Eq, Hash)]
pub struct BlockHeader {
    pub hash: Bytes,
    pub number: u64,
    pub parent_hash: Bytes,
    pub revert: bool,
    pub timestamp: u64,
    /// Index of a partial block update within a block. None for full blocks.
    #[serde(default, skip_serializing_if = "Option::is_none")]
    pub partial_block_index: Option<u32>,
}

impl BlockHeader {
    fn is_partial(&self) -> bool {
        self.partial_block_index.is_some()
    }
}

impl Display for BlockHeader {
    fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
        // Take first 6 hex chars of the hash for readability
        let short_hash = if self.hash.len() >= 4 {
            hex::encode(&self.hash[..4]) // 4 bytes → 8 hex chars
        } else {
            hex::encode(&self.hash)
        };

        match self.partial_block_index {
            Some(idx) => write!(f, "Block #{} [0x{}..] (partial {})", self.number, short_hash, idx),
            None => write!(f, "Block #{} [0x{}..]", self.number, short_hash),
        }
    }
}

impl From<&BlockAggregatedChanges> for BlockHeader {
    fn from(block_changes: &BlockAggregatedChanges) -> Self {
        let block = &block_changes.block;
        Self {
            hash: block.hash.clone(),
            number: block.number,
            parent_hash: block.parent_hash.clone(),
            revert: block_changes.revert,
            timestamp: block.ts.and_utc().timestamp() as u64,
            partial_block_index: block_changes.partial_block_index,
        }
    }
}

impl HeaderLike for BlockHeader {
    fn block(self) -> Option<BlockHeader> {
        Some(self)
    }

    fn block_number_or_timestamp(self) -> u64 {
        self.number
    }
}

#[derive(Error, Debug)]
pub enum BlockSynchronizerError {
    #[error("Failed to initialize extractor '{extractor}': {source}")]
    InitializationError {
        extractor: ExtractorIdentity,
        #[source]
        source: SynchronizerError,
    },

    #[error("Failed to process new block: {0}")]
    BlockHistoryError(#[from] BlockHistoryError),

    #[error("Not a single synchronizer was ready: {0}")]
    NoReadySynchronizers(String),

    #[error("No synchronizers were set")]
    NoSynchronizers,

    #[error("Failed to convert duration: {0}")]
    DurationConversionError(String),
}

type BlockSyncResult<T> = Result<T, BlockSynchronizerError>;

/// Aligns multiple StateSynchronizers on the block dimension.
///
/// ## Purpose
/// The purpose of this component is to handle streams from multiple state synchronizers and
/// align/merge them according to their blocks. Ideally this should be done in a fault-tolerant way,
/// meaning we can recover from a state synchronizer suffering from timing issues. E.g. a delayed or
/// unresponsive state synchronizer might recover again, or an advanced state synchronizer can be
/// included again once we reach the block it is at.
///
/// ## Limitations
/// - Supports only chains with fixed blocks time for now due to the lock step mechanism.
///
/// ## Initialisation
/// Queries all registered synchronizers for their first message and evaluates the state of each
/// synchronizer. If a synchronizer's first message is an older block, it is marked as delayed.
// TODO: what is the startup timeout
/// If no message is received within the startup timeout, the synchronizer is marked as stale and is
/// closed.
///
/// ## Main loop
/// Once started, the synchronizers are queried concurrently for messages in lock step:
/// the main loop queries all synchronizers in ready for the last emitted data, builds the
/// `FeedMessage` and emits it, then it schedules the wait procedure for the next block.
///
/// ## Synchronization Logic
///
/// To classify a synchronizer as delayed, we need to first define the current block. The highest
/// block number of all ready synchronizers is considered the current block.
///
/// Once we have the current block we can easily determine which block we expect next. And if a
/// synchronizer delivers an older block we can classify it as delayed.
///
/// If any synchronizer is not in the ready state we will try to bring it back to the ready state.
/// This is done by trying to empty any buffers of a delayed synchronizer or waiting to reach
/// the height of an advanced synchronizer (and flagging it as such in the meantime).
///
/// Of course, we can't wait forever for a synchronizer to reply/recover. All of this must happen
/// within the block production step of the blockchain:
/// The wait procedure consists of waiting for any of the individual ProtocolStateSynchronizers
/// to emit a new message (within a max timeout - several multiples of the block time). Once a
/// message is received a very short timeout starts for the remaining synchronizers, to deliver a
/// message. Any synchronizer failing to do so is transitioned to delayed.
///
/// ### Note
/// The described process above is the goal. It is currently not implemented like that. Instead we
/// simply wait `block_time` + `wait_time`. Synchronizers are expected to respond within that
/// timeout. This is simpler but only works well on chains with fixed block times.
pub struct BlockSynchronizer<S> {
    synchronizers: Option<HashMap<ExtractorIdentity, S>>,
    /// Time to wait for a block usually
    block_time: std::time::Duration,
    /// Added on top of block time to account for latency
    latency_buffer: std::time::Duration,
    /// Time to wait for the full first message, including snapshot retrieval
    startup_timeout: std::time::Duration,
    /// Optionally, end the stream after emitting max messages
    max_messages: Option<usize>,
    /// Amount of blocks a protocol can be delayed for, before it is considered stale
    max_missed_blocks: u64,
}

#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
#[serde(tag = "status", rename_all = "lowercase")]
pub enum SynchronizerState {
    /// Initial state, assigned before trying to receive any message
    Started,
    /// The synchronizer emitted a message for the block as expected
    Ready(BlockHeader),
    /// The synchronizer is on a previous block compared to others and is expected to
    /// catch up soon.
    Delayed(BlockHeader),
    /// The synchronizer hasn't emitted messages for > `max_missed_blocks` or has
    /// fallen far behind. At this point we do not wait for it anymore but it can
    /// still eventually recover.
    Stale(BlockHeader),
    /// The synchronizer is on future not connected block.
    // For this to happen we must have a gap, and a gap usually means a new snapshot from the
    // StateSynchronizer. This can only happen if we are processing too slow and one or all of the
    // synchronizers restarts e.g. due to websocket connection drops.
    Advanced(BlockHeader),
    /// The synchronizer ended with an error.
    Ended(String),
}

impl Display for SynchronizerState {
    fn fmt(&self, f: &mut Formatter<'_>) -> std::fmt::Result {
        match self {
            SynchronizerState::Started => write!(f, "Started"),
            SynchronizerState::Ready(b) => write!(f, "Started({})", b.number),
            SynchronizerState::Delayed(b) => write!(f, "Delayed({})", b.number),
            SynchronizerState::Stale(b) => write!(f, "Stale({})", b.number),
            SynchronizerState::Advanced(b) => write!(f, "Advanced({})", b.number),
            SynchronizerState::Ended(reason) => write!(f, "Ended({})", reason),
        }
    }
}

pub struct SynchronizerStream {
    extractor_id: ExtractorIdentity,
    state: SynchronizerState,
    error: Option<SynchronizerError>,
    modify_ts: NaiveDateTime,
    rx: Receiver<SyncResult<StateSyncMessage<BlockHeader>>>,
}

impl SynchronizerStream {
    fn new(
        extractor_id: &ExtractorIdentity,
        rx: Receiver<SyncResult<StateSyncMessage<BlockHeader>>>,
    ) -> Self {
        Self {
            extractor_id: extractor_id.clone(),
            state: SynchronizerState::Started,
            error: None,
            modify_ts: Local::now().naive_utc(),
            rx,
        }
    }

    /// Advance a synchronizer by one step.
    ///
    /// - `block_history`: validated chain of recent blocks used to classify incoming headers.
    /// - `block_time`: expected time between blocks; sets the base timeout for Ready streams.
    /// - `latency_buffer`: added on top of `block_time` to absorb network/processing jitter.
    /// - `stale_threshold`: how long a stream can make no progress before it is marked Stale and
    ///   skipped.
    /// - `skip_wait`: skip the blocking wait for all protocol state synchronizers - only advance
    ///   those that have waiting messages.
    async fn try_advance(
        &mut self,
        block_history: &BlockHistory,
        block_time: std::time::Duration,
        latency_buffer: std::time::Duration,
        stale_threshold: std::time::Duration,
        skip_wait: bool,
    ) -> BlockSyncResult<Option<StateSyncMessage<BlockHeader>>> {
        let extractor_id = self.extractor_id.clone();
        let latest_block = block_history.latest();

        match &self.state {
            SynchronizerState::Started | SynchronizerState::Ended(_) => {
                warn!(state=?&self.state, "Advancing Synchronizer in this state not supported!");
                Ok(None)
            }
            SynchronizerState::Advanced(b) => {
                let future_block = b.clone();
                // Transition to ready once we arrived at the expected height
                self.transition(future_block, block_history, stale_threshold)?;
                Ok(None)
            }
            SynchronizerState::Ready(previous_block) => {
                // Try to recv the next expected block, update state accordingly.
                self.try_recv_next_expected(
                    block_time + latency_buffer,
                    block_history,
                    previous_block.clone(),
                    stale_threshold,
                )
                .await
            }
            SynchronizerState::Delayed(old_block) => {
                // try to catch up all currently queued blocks until the expected block
                debug!(
                    %old_block,
                    latest_block=opt(&latest_block),
                    %extractor_id,
                    "Trying to catch up to latest block"
                );
                let timeout =
                    if skip_wait { std::time::Duration::ZERO } else { block_time + latency_buffer };
                self.try_catch_up(block_history, timeout, stale_threshold)
                    .await
            }
            SynchronizerState::Stale(old_block) => {
                // try to catch up all currently queued blocks until the expected block
                debug!(
                    %old_block,
                    latest_block=opt(&latest_block),
                    %extractor_id,
                    "Trying to catch up stale synchronizer to latest block"
                );
                let timeout = if skip_wait { std::time::Duration::ZERO } else { block_time };
                self.try_catch_up(block_history, timeout, stale_threshold)
                    .await
            }
        }
    }

    /// Standard way to advance a well-behaved state synchronizer.
    ///
    /// Will wait for a new block on the synchronizer within a timeout. And modify its
    /// state based on the outcome.
    ///
    /// ## Note
    /// This method assumes that the current state is `Ready`.
    async fn try_recv_next_expected(
        &mut self,
        max_wait: std::time::Duration,
        block_history: &BlockHistory,
        previous_block: BlockHeader,
        stale_threshold: std::time::Duration,
    ) -> BlockSyncResult<Option<StateSyncMessage<BlockHeader>>> {
        let extractor_id = self.extractor_id.clone();
        match timeout(max_wait, self.rx.recv()).await {
            Ok(Some(Ok(msg))) => {
                self.transition(msg.header.clone(), block_history, stale_threshold)?;
                Ok(Some(msg))
            }
            Ok(Some(Err(e))) => {
                // The underlying synchronizer exhausted its retries
                self.mark_errored(e);
                Ok(None)
            }
            Ok(None) => {
                // This case should not happen, as we shouldn't poll the synchronizer after we
                // closed it or after it errored.
                warn!(
                    %extractor_id,
                    "Tried to poll from closed synchronizer.",
                );
                self.mark_closed();
                Ok(None)
            }
            Err(_) => {
                // trying to advance a block timed out
                debug!(%extractor_id, %previous_block, "No block received within time limit.");
                // No need to consider state since we only call this method if we are
                // in the Ready state.
                self.state = SynchronizerState::Delayed(previous_block.clone());
                self.modify_ts = Local::now().naive_utc();
                Ok(None)
            }
        }
    }

    /// Tries to catch up a delayed state synchronizer.
    ///
    /// If a synchronizer is delayed, this method will try to catch up to the next expected block
    /// by consuming all waiting messages in its queue and waiting for any new block messages
    /// within a timeout. Finally, all update messages are merged into one and returned.
    async fn try_catch_up(
        &mut self,
        block_history: &BlockHistory,
        max_wait: std::time::Duration,
        stale_threshold: std::time::Duration,
    ) -> BlockSyncResult<Option<StateSyncMessage<BlockHeader>>> {
        let mut results = Vec::new();
        let extractor_id = self.extractor_id.clone();

        // Set a deadline for the overall catch-up operation
        let deadline = std::time::Instant::now() + max_wait;

        while std::time::Instant::now() < deadline {
            match timeout(
                deadline.saturating_duration_since(std::time::Instant::now()),
                self.rx.recv(),
            )
            .await
            {
                Ok(Some(Ok(msg))) => {
                    debug!(%extractor_id, block=%msg.header, "Received new message during catch-up");
                    let block_pos = block_history.determine_block_position(&msg.header)?;
                    results.push(msg);
                    if matches!(block_pos, BlockPosition::NextExpected | BlockPosition::NextPartial)
                    {
                        break;
                    }
                }
                Ok(Some(Err(e))) => {
                    // Synchronizer errored during catch up
                    self.mark_errored(e);
                    return Ok(None);
                }
                Ok(None) => {
                    // This case should not happen, as we shouldn't poll the synchronizer after we
                    // closed it or after it errored.
                    warn!(
                        %extractor_id,
                        "Tried to poll from closed synchronizer during catch up.",
                    );
                    self.mark_closed();
                    return Ok(None);
                }
                Err(_) => {
                    debug!(%extractor_id, "Timed out waiting for catch-up");
                    break;
                }
            }
        }

        let merged = results
            .into_iter()
            .reduce(|l, r| l.merge(r));

        if let Some(msg) = merged {
            // we were able to get at least one block out
            debug!(%extractor_id, "Delayed extractor made progress!");
            self.transition(msg.header.clone(), block_history, stale_threshold)?;
            Ok(Some(msg))
        } else {
            // No progress made during catch-up, check if we should go stale
            self.check_and_transition_to_stale_if_needed(stale_threshold, None)?;
            Ok(None)
        }
    }

    /// Helper method to check if synchronizer should transition to stale based on time elapsed
    fn check_and_transition_to_stale_if_needed(
        &mut self,
        stale_threshold: std::time::Duration,
        fallback_header: Option<BlockHeader>,
    ) -> Result<bool, BlockSynchronizerError> {
        let now = Local::now().naive_utc();
        let wait_duration = now.signed_duration_since(self.modify_ts);
        let stale_threshold_chrono = ChronoDuration::from_std(stale_threshold)
            .map_err(|e| BlockSynchronizerError::DurationConversionError(e.to_string()))?;

        if wait_duration > stale_threshold_chrono {
            let header_to_use = match (&self.state, fallback_header) {
                (SynchronizerState::Ready(h), _) |
                (SynchronizerState::Delayed(h), _) |
                (SynchronizerState::Stale(h), _) => h.clone(),
                (_, Some(h)) => h,
                _ => BlockHeader::default(),
            };

            warn!(
                extractor_id=%self.extractor_id,
                last_message_at=?self.modify_ts,
                "SynchronizerStream transition to stale due to timeout."
            );
            self.state = SynchronizerState::Stale(header_to_use);
            self.modify_ts = now;
            Ok(true)
        } else {
            Ok(false)
        }
    }

    /// Logic to transition a state synchronizer based on newly received block
    ///
    /// Updates the synchronizer's state according to the position of the received block:
    /// - Next expected block -> Ready state
    /// - Latest/Delayed block -> Either Delayed or Stale (if >60s since last update)
    /// - Advanced block -> Advanced state (block ahead of expected position)
    fn transition(
        &mut self,
        latest_retrieved: BlockHeader,
        block_history: &BlockHistory,
        stale_threshold: std::time::Duration,
    ) -> Result<(), BlockSynchronizerError> {
        let extractor_id = self.extractor_id.clone();
        let last_message_at = self.modify_ts;
        let block = &latest_retrieved;

        match block_history.determine_block_position(&latest_retrieved)? {
            BlockPosition::NextExpected | BlockPosition::NextPartial => {
                self.state = SynchronizerState::Ready(latest_retrieved.clone());
                trace!(
                    next = %latest_retrieved,
                    extractor = %extractor_id,
                    "SynchronizerStream transition to next expected"
                )
            }
            BlockPosition::Latest | BlockPosition::Delayed => {
                if !self.check_and_transition_to_stale_if_needed(
                    stale_threshold,
                    Some(latest_retrieved.clone()),
                )? {
                    warn!(
                        %extractor_id,
                        ?last_message_at,
                        %block,
                        "SynchronizerStream transition transition to delayed."
                    );
                    self.state = SynchronizerState::Delayed(latest_retrieved.clone());
                }
            }
            BlockPosition::Advanced => {
                info!(
                    %extractor_id,
                    ?last_message_at,
                    latest = opt(&block_history.latest()),
                    %block,
                    "SynchronizerStream transition to advanced."
                );
                self.state = SynchronizerState::Advanced(latest_retrieved.clone());
            }
        }
        self.modify_ts = Local::now().naive_utc();
        Ok(())
    }

    /// Marks this stream as errored
    ///
    /// Sets an error and transitions the stream to Ended, correctly recording the
    /// time at which this happened.
    fn mark_errored(&mut self, error: SynchronizerError) {
        self.state = SynchronizerState::Ended(error.to_string());
        self.modify_ts = Local::now().naive_utc();
        self.error = Some(error);
    }

    /// Marks a stream as closed.
    ///
    /// If the stream has not been ended previously, e.g. by an error it will be marked
    /// as Ended without error. This should not happen since we should stop consuming
    /// from the stream if an error occured.
    fn mark_closed(&mut self) {
        if !matches!(self.state, SynchronizerState::Ended(_)) {
            self.state = SynchronizerState::Ended("Closed".to_string());
            self.modify_ts = Local::now().naive_utc();
        }
    }

    /// Marks a stream as stale.
    fn mark_stale(&mut self, header: &BlockHeader) {
        self.state = SynchronizerState::Stale(header.clone());
        self.modify_ts = Local::now().naive_utc();
    }

    /// Marks this stream as ready.
    fn mark_ready(&mut self, header: &BlockHeader) {
        self.state = SynchronizerState::Ready(header.clone());
        self.modify_ts = Local::now().naive_utc();
    }

    fn has_ended(&self) -> bool {
        matches!(self.state, SynchronizerState::Ended(_))
    }

    fn is_stale(&self) -> bool {
        matches!(self.state, SynchronizerState::Stale(_))
    }

    fn is_advanced(&self) -> bool {
        matches!(self.state, SynchronizerState::Advanced(_))
    }

    /// Gets the streams current header from active streams.
    ///
    /// A stream is considered as active unless it has ended or is stale.
    fn get_current_header(&self) -> Option<&BlockHeader> {
        match &self.state {
            SynchronizerState::Ready(b) |
            SynchronizerState::Delayed(b) |
            SynchronizerState::Advanced(b) => Some(b),
            _ => None,
        }
    }
}

#[derive(Debug, PartialEq, Clone)]
pub struct FeedMessage<H = BlockHeader>
where
    H: HeaderLike,
{
    pub state_msgs: HashMap<String, StateSyncMessage<H>>,
    pub sync_states: HashMap<String, SynchronizerState>,
}

impl<H> FeedMessage<H>
where
    H: HeaderLike,
{
    fn new(
        state_msgs: HashMap<String, StateSyncMessage<H>>,
        sync_states: HashMap<String, SynchronizerState>,
    ) -> Self {
        Self { state_msgs, sync_states }
    }
}

impl<S> BlockSynchronizer<S>
where
    S: StateSynchronizer,
{
    pub fn new(
        block_time: std::time::Duration,
        latency_buffer: std::time::Duration,
        max_missed_blocks: u64,
    ) -> Self {
        Self {
            synchronizers: None,
            max_messages: None,
            block_time,
            latency_buffer,
            startup_timeout: block_time.mul_f64(max_missed_blocks as f64),
            max_missed_blocks,
        }
    }

    /// Limits the stream to emit a maximum number of messages.
    ///
    /// After the stream emitted max messages it will end. This is only useful for
    /// testing purposes or if you only want to process a fixed amount of messages
    /// and then terminate cleanly.
    pub fn max_messages(&mut self, val: usize) {
        self.max_messages = Some(val);
    }

    /// Sets timeout for the first message of a protocol.
    ///
    /// Time to wait for the full first message, including snapshot retrieval.
    pub fn startup_timeout(mut self, val: Duration) {
        self.startup_timeout = val;
    }

    pub fn register_synchronizer(mut self, id: ExtractorIdentity, synchronizer: S) -> Self {
        let mut registered = self.synchronizers.unwrap_or_default();
        registered.insert(id, synchronizer);
        self.synchronizers = Some(registered);
        self
    }

    #[cfg(test)]
    pub fn with_short_timeouts() -> Self {
        Self::new(Duration::from_millis(10), Duration::from_millis(10), 3)
    }

    /// Cleanup function for shutting down remaining synchronizers when the nanny detects an error.
    /// Sends close signals to all remaining synchronizers and waits for them to complete.
    async fn cleanup_synchronizers(
        mut state_sync_tasks: FuturesUnordered<JoinHandle<()>>,
        sync_close_senders: Vec<oneshot::Sender<()>>,
    ) {
        // Send close signals to all remaining synchronizers
        for close_sender in sync_close_senders {
            let _ = close_sender.send(());
        }

        // Await remaining tasks with timeout
        let mut completed_tasks = 0;
        while let Ok(Some(_)) = timeout(Duration::from_secs(5), state_sync_tasks.next()).await {
            completed_tasks += 1;
        }

        // Warn if any synchronizers timed out during cleanup
        let remaining_tasks = state_sync_tasks.len();
        if remaining_tasks > 0 {
            warn!(
                completed = completed_tasks,
                timed_out = remaining_tasks,
                "Some synchronizers timed out during cleanup and may not have shut down cleanly"
            );
        }
    }

    /// Starts the synchronization of streams.
    ///
    /// Will error directly if the startup fails. Once the startup is complete, it will
    /// communicate any fatal errors through the stream before closing it.
    pub async fn run(
        mut self,
    ) -> BlockSyncResult<(JoinHandle<()>, Receiver<BlockSyncResult<FeedMessage<BlockHeader>>>)>
    {
        trace!("Starting BlockSynchronizer...");
        let state_sync_tasks = FuturesUnordered::new();
        let mut synchronizers = self
            .synchronizers
            .take()
            .ok_or(BlockSynchronizerError::NoSynchronizers)?;
        // init synchronizers; unknown extractors are warned about and skipped rather than
        // crashing the whole client, so a misconfigured protocol doesn't take down valid ones.
        let init_results = join_all(synchronizers.iter_mut().map(|(id, s)| {
            s.initialize()
                .map(|res| (id.clone(), res))
        }))
        .await;
        let mut to_skip = Vec::new();
        for (extractor_id, result) in init_results {
            match result {
                Ok(()) => {}
                Err(SynchronizerError::RPCError(crate::rpc::RPCError::UnknownExtractor(
                    reason,
                ))) => {
                    warn!(%extractor_id, %reason, "Extractor not recognised by server, skipping");
                    to_skip.push(extractor_id);
                }
                Err(e) => {
                    return Err(BlockSynchronizerError::InitializationError {
                        extractor: extractor_id,
                        source: e,
                    })
                }
            }
        }
        for id in &to_skip {
            synchronizers.remove(id);
        }
        if synchronizers.is_empty() {
            return Err(BlockSynchronizerError::NoSynchronizers);
        }

        let mut sync_streams = Vec::with_capacity(synchronizers.len());
        let mut sync_close_senders = Vec::new();
        for (extractor_id, synchronizer) in synchronizers.drain() {
            let (handle, rx) = synchronizer.start().await;
            let (join_handle, close_sender) = handle.split();
            state_sync_tasks.push(join_handle);
            sync_close_senders.push(close_sender);

            sync_streams.push(SynchronizerStream::new(&extractor_id, rx));
        }

        // startup, schedule first set of futures and wait for them to return to initialise
        // synchronizers.
        debug!("Waiting for initial synchronizer messages...");
        let mut startup_futures = Vec::new();
        for synchronizer in sync_streams.iter_mut() {
            let fut = async {
                let res = timeout(self.startup_timeout, synchronizer.rx.recv()).await;
                (synchronizer, res)
            };
            startup_futures.push(fut);
        }

        let mut ready_sync_msgs = HashMap::new();
        let initial_headers = join_all(startup_futures)
            .await
            .into_iter()
            .filter_map(|(synchronizer, res)| {
                let extractor_id = synchronizer.extractor_id.clone();
                match res {
                    Ok(Some(Ok(msg))) => {
                        debug!(%extractor_id, height=?&msg.header.number, "Synchronizer started successfully!");
                        // initially default all synchronizers to Ready
                        synchronizer.mark_ready(&msg.header);
                        let header = msg.header.clone();
                        ready_sync_msgs.insert(extractor_id.name.clone(), msg);
                        Some(header)
                    }
                    Ok(Some(Err(e))) => {
                        synchronizer.mark_errored(e);
                        None
                    }
                    Ok(None) => {
                        // Synchronizer closed channel. This can only happen if the run
                        // task ended, before this, the synchronizer should have sent
                        // an error, so this case we likely don't have to handle that
                        // explicitly
                        warn!(%extractor_id, "Synchronizer closed during startup");
                        synchronizer.mark_closed();
                        None
                    }
                    Err(_) => {
                        // We got an error because the synchronizer timed out during startup
                        warn!(%extractor_id, "Timed out waiting for first message");
                        synchronizer.mark_stale(&BlockHeader::default());
                        None
                    }
                }
            })
            .collect::<HashSet<_>>() // remove duplicates
            .into_iter()
            .collect::<Vec<_>>();

        // Fail fast if no synchronizer produced a ready first message.
        Self::require_active_stream(&sync_streams)?;
        let mut block_history = BlockHistory::new(initial_headers, BLOCK_HISTORY_SIZE)?;
        // Determine the starting header for synchronization.
        // Safe: require_active_stream above guarantees at least one Ready stream,
        // so initial_headers is non-empty and block_history.latest() is Some.
        let start_header = block_history
            .latest()
            .ok_or(BlockHistoryError::EmptyHistory)?;
        info!(
            start_block=%start_header,
            n_healthy=ready_sync_msgs.len(),
            n_total=sync_streams.len(),
            "Block synchronization started successfully!"
        );

        // Determine correct state for each remaining synchronizer, based on their header vs the
        // latest one
        for stream in sync_streams.iter_mut() {
            if let SynchronizerState::Ready(header) = stream.state.clone() {
                if header.number < start_header.number {
                    debug!(
                        extractor_id=%stream.extractor_id,
                        synchronizer_block=header.number,
                        current_block=start_header.number,
                        "Marking synchronizer as delayed during initialization"
                    );
                    stream.state = SynchronizerState::Delayed(header);
                }
            }
        }

        let (sync_tx, sync_rx) = mpsc::channel(30);
        let main_loop_jh = tokio::spawn(async move {
            let mut n_iter = 1;
            loop {
                // Send retrieved data to receivers.
                let msg = FeedMessage::new(
                    std::mem::take(&mut ready_sync_msgs),
                    sync_streams
                        .iter()
                        .map(|stream| (stream.extractor_id.name.to_string(), stream.state.clone()))
                        .collect(),
                );
                if sync_tx.send(Ok(msg)).await.is_err() {
                    info!("Receiver closed, block synchronizer terminating..");
                    return;
                };

                // Check if we have reached the max messages
                if let Some(max_messages) = self.max_messages {
                    if n_iter >= max_messages {
                        info!(max_messages, "StreamEnd");
                        return;
                    }
                }
                n_iter += 1;

                let res = self
                    .handle_next_message(
                        &mut sync_streams,
                        &mut ready_sync_msgs,
                        &mut block_history,
                    )
                    .await;

                if let Err(e) = res {
                    // Communicate error to clients, then end the loop
                    let _ = sync_tx.send(Err(e)).await;
                    return;
                }
            }
        });

        // We await the main loop and log any panics (should be impossible). If the
        // main loop exits, all synchronizers should be ended or stale. So we kill any
        // remaining stale ones just in case. A final error is propagated through the
        // channel to the user.
        let nanny_jh = tokio::spawn(async move {
            // report any panics
            let _ = main_loop_jh.await.map_err(|e| {
                if e.is_panic() {
                    error!("BlockSynchornizer main loop panicked: {e}")
                }
            });
            debug!("Main loop exited. Closing synchronizers");
            Self::cleanup_synchronizers(state_sync_tasks, sync_close_senders).await;
            debug!("Shutdown complete");
        });
        Ok((nanny_jh, sync_rx))
    }

    /// Retrieves next message from synchronizers
    ///
    /// The result is written into `ready_sync_messages`. Errors only if there is a
    /// non-recoverable error or all synchronizers have ended.
    async fn handle_next_message(
        &self,
        sync_streams: &mut [SynchronizerStream],
        ready_sync_msgs: &mut HashMap<String, StateSyncMessage<BlockHeader>>,
        block_history: &mut BlockHistory,
    ) -> BlockSyncResult<()> {
        // If any synchronizer already has a future block, Delayed/Stale streams should not
        // wait their full catch-up timeout — a reinit is about to fire and the wait would
        // only lock-step the consumer further behind the chain head.
        let any_advanced = sync_streams
            .iter()
            .any(SynchronizerStream::is_advanced);
        let mut recv_futures = Vec::new();
        for stream in sync_streams.iter_mut() {
            // If stream is in ended state, do not check for any messages (it's receiver
            // is closed), but do check stale streams.
            if stream.has_ended() {
                continue;
            }
            // Here we simply wait block_time + max_wait. This will not work for chains with
            // unknown block times but is simple enough for now.
            // If we would like to support unknown block times we could: Instruct all handles to
            // await the max block time, if a header arrives within that time transition as
            // usual, but via a select statement get notified (using e.g. Notify) if any other
            // handle finishes before the timeout. Then await again but this time only for
            // max_wait and then proceed as usual. So basically each try_advance task would have
            // a select statement that allows it to exit the first timeout preemptively if any
            // other try_advance task finished earlier.
            recv_futures.push(async {
                let res = stream
                    .try_advance(
                        block_history,
                        self.block_time,
                        self.latency_buffer,
                        self.block_time
                            .mul_f64(self.max_missed_blocks as f64),
                        any_advanced,
                    )
                    .await?;
                Ok::<_, BlockSynchronizerError>(
                    res.map(|msg| (stream.extractor_id.name.clone(), msg)),
                )
            });
        }
        ready_sync_msgs.extend(
            join_all(recv_futures)
                .await
                .into_iter()
                .collect::<Result<Vec<_>, _>>()?
                .into_iter()
                .flatten(),
        );

        // Check if we have any active synchronizers (Ready, Delayed, or Advanced)
        // If all synchronizers have been purged (Stale/Ended), exit the main loop
        Self::check_streams(sync_streams)?;

        // if we have any advanced header, we reinit the block history,
        // else we simply advance the existing history
        if sync_streams
            .iter()
            .any(SynchronizerStream::is_advanced)
        {
            *block_history = Self::reinit_block_history(sync_streams, block_history)?;
        } else if let Some(header) = sync_streams
            .iter()
            .filter_map(SynchronizerStream::get_current_header)
            .max_by_key(|b| b.number)
        {
            block_history.push(header.clone())?;
        }
        // If all synchronizers are stale (e.g. WS reconnect in progress), skip block
        // history update and continue waiting for recovery.
        Ok(())
    }

    /// Reinitialise block history and reclassifies active synchronizers states.
    ///
    /// We call this if we detect a future detached block. This usually only happens if
    /// a synchronizer has a restart.
    ///
    /// ## Note
    /// This method assumes that at least one synchronizer is in Advanced, Ready or
    /// Delayed state, it will return an error in case this is not the case.
    fn reinit_block_history(
        sync_streams: &mut [SynchronizerStream],
        block_history: &mut BlockHistory,
    ) -> Result<BlockHistory, BlockSynchronizerError> {
        let previous = block_history
            .latest()
            // Old block history should not be empty, startup should have populated it at this point
            .ok_or(BlockHistoryError::EmptyHistory)?
            .clone();
        // Preserve the previously retained history so a revert to a block below the advanced tip
        // can still find its fork point. Seeding only from current stream headers roots the new
        // history at the oldest header the streams happen to hold, dropping the ancestors a later
        // revert needs: a revert targeting that root drains the deque looking for its parent and
        // fails with `RevertPositionNotFound` ("History exceeded"). `BlockHistory::new` keeps the
        // connected chain ending at the highest-numbered header, so detached older blocks (a
        // genuine gap, e.g. after a restart) are still discarded.
        let mut blocks: Vec<BlockHeader> = block_history
            .blocks()
            .cloned()
            .collect();
        blocks.extend(
            sync_streams
                .iter()
                .filter_map(SynchronizerStream::get_current_header)
                .cloned(),
        );
        let new_block_history = BlockHistory::new(blocks, BLOCK_HISTORY_SIZE)?;
        let latest = new_block_history
            .latest()
            // Block history should not be empty, we just populated it.
            .ok_or(BlockHistoryError::EmptyHistory)?;
        info!(
             %previous,
            %latest,
            "Advanced synchronizer detected. Reinitialized block history."
        );
        sync_streams
            .iter_mut()
            .for_each(|stream| {
                // we only get headers from advanced, ready and delayed so stale
                // or ended streams are not considered here
                if let Some(header) = stream.get_current_header() {
                    if header.number < latest.number {
                        stream.state = SynchronizerState::Delayed(header.clone());
                    } else if header.number == latest.number {
                        stream.state = SynchronizerState::Ready(header.clone());
                    }
                }
            });
        Ok(new_block_history)
    }

    /// Startup check: fails if no synchronizer is active (all Stale or Ended at init time).
    ///
    /// Used once before entering the main loop, where all-Stale is a fatal configuration
    /// problem (nothing to sync from), not a temporary disconnect.
    fn require_active_stream(sync_streams: &[SynchronizerStream]) -> BlockSyncResult<()> {
        if sync_streams
            .iter()
            .any(|s| !s.has_ended() && !s.is_stale())
        {
            return Ok(());
        }
        let reason: Vec<String> = sync_streams
            .iter()
            .map(|s| format!("{} reported as {} at {}", s.extractor_id, s.state, s.modify_ts))
            .collect();
        Err(BlockSynchronizerError::NoReadySynchronizers(reason.join(", ")))
    }

    /// Checks if the main loop should continue or exit.
    ///
    /// Returns `Ok` if:
    /// - At least one synchronizer is active (Ready, Delayed, or Advanced), OR
    /// - All synchronizers are stale but none have ended — temporary disconnect (e.g. WS reconnect)
    ///   where recovery is still possible.
    ///
    /// Returns `Err` if at least one synchronizer has permanently ended while all
    /// remaining ones are stale — no recovery path exists.
    fn check_streams(sync_streams: &[SynchronizerStream]) -> BlockSyncResult<()> {
        let mut has_any_ended = false;
        let mut latest_ended_stream: Option<&SynchronizerStream> = None;

        for stream in sync_streams.iter() {
            // If we have at least one active stream (ready, delayed, or advanced), continue.
            if !stream.has_ended() && !stream.is_stale() {
                return Ok(());
            }

            if stream.has_ended() {
                has_any_ended = true;
                if latest_ended_stream.is_none() ||
                    stream.modify_ts >
                        latest_ended_stream
                            .as_ref()
                            .unwrap()
                            .modify_ts
                {
                    latest_ended_stream = Some(stream);
                }
            }
        }

        // All streams are stale or ended. If none have ended, all synchronizers are
        // temporarily disconnected — wait for recovery without exiting the main loop.
        if !has_any_ended {
            return Ok(());
        }

        // At least one synchronizer has permanently ended while all others are stale.
        let last_error_reason = if let Some(stream) = latest_ended_stream {
            if let Some(err) = &stream.error {
                format!("Synchronizer for {} errored with: {err}", stream.extractor_id)
            } else {
                format!("Synchronizer for {} became: {}", stream.extractor_id, stream.state)
            }
        } else {
            return Err(BlockSynchronizerError::NoSynchronizers);
        };

        let mut reason = vec![last_error_reason];

        sync_streams.iter().for_each(|stream| {
            reason.push(format!(
                "{} reported as {} at {}",
                stream.extractor_id, stream.state, stream.modify_ts
            ))
        });

        Err(BlockSynchronizerError::NoReadySynchronizers(reason.join(", ")))
    }
}

#[cfg(test)]
mod tests {
    use std::sync::Arc;

    use async_trait::async_trait;
    use test_log::test;
    use tokio::sync::{oneshot, Mutex};
    use tycho_common::models::Chain;

    use super::*;
    use crate::feed::synchronizer::{SyncResult, SynchronizerTaskHandle};

    #[derive(Clone, Debug)]
    enum MockBehavior {
        Normal,          // Exit successfully when receiving close signal
        IgnoreClose,     // Ignore close signals and hang (for timeout testing)
        ExitImmediately, // Exit immediately after first message (for quick failure testing)
    }

    type HeaderReceiver = Receiver<SyncResult<StateSyncMessage<BlockHeader>>>;

    #[derive(Clone)]
    struct MockStateSync {
        header_tx: mpsc::Sender<SyncResult<StateSyncMessage<BlockHeader>>>,
        header_rx: Arc<Mutex<Option<HeaderReceiver>>>,
        close_received: Arc<Mutex<bool>>,
        behavior: MockBehavior,
        // For testing: store the close sender so tests can trigger close signals
        close_tx: Arc<Mutex<Option<oneshot::Sender<()>>>>,
    }

    impl MockStateSync {
        fn new() -> Self {
            Self::with_behavior(MockBehavior::Normal)
        }

        fn with_behavior(behavior: MockBehavior) -> Self {
            let (tx, rx) = mpsc::channel(1);
            Self {
                header_tx: tx,
                header_rx: Arc::new(Mutex::new(Some(rx))),
                close_received: Arc::new(Mutex::new(false)),
                behavior,
                close_tx: Arc::new(Mutex::new(None)),
            }
        }

        async fn was_close_received(&self) -> bool {
            *self.close_received.lock().await
        }

        async fn send_header(&self, header: StateSyncMessage<BlockHeader>) -> Result<(), String> {
            self.header_tx
                .send(Ok(header))
                .await
                .map_err(|e| format!("sending header failed: {e}"))
        }

        // For testing: trigger a close signal to make the synchronizer exit
        async fn trigger_close(&self) {
            if let Some(close_tx) = self.close_tx.lock().await.take() {
                let _ = close_tx.send(());
            }
        }
    }

    #[async_trait]
    impl StateSynchronizer for MockStateSync {
        async fn initialize(&mut self) -> SyncResult<()> {
            Ok(())
        }

        async fn start(
            mut self,
        ) -> (SynchronizerTaskHandle, Receiver<SyncResult<StateSyncMessage<BlockHeader>>>) {
            let block_rx = {
                let mut guard = self.header_rx.lock().await;
                guard
                    .take()
                    .expect("Block receiver was not set!")
            };

            // Create close channel - we need to store one sender for testing and give one to the
            // handle
            let (close_tx_for_handle, close_rx) = oneshot::channel();
            let (close_tx_for_test, close_rx_for_test) = oneshot::channel();

            // Store the test close sender
            {
                let mut guard = self.close_tx.lock().await;
                *guard = Some(close_tx_for_test);
            }

            let behavior = self.behavior.clone();
            let close_received_clone = self.close_received.clone();
            let tx = self.header_tx.clone();

            let jh = tokio::spawn(async move {
                match behavior {
                    MockBehavior::IgnoreClose => {
                        // Infinite loop to simulate a hung synchronizer that doesn't respond to
                        // close signals
                        loop {
                            tokio::time::sleep(tokio::time::Duration::from_secs(1)).await;
                        }
                    }
                    MockBehavior::ExitImmediately => {
                        // Exit immediately with error to simulate immediate task failure
                        tx.send(SyncResult::Err(SynchronizerError::ConnectionError(
                            "Simulated immediate task failure".to_string(),
                        )))
                        .await
                        .unwrap();
                    }
                    MockBehavior::Normal => {
                        // Wait for close signal from either handle or test, then respond based on
                        // behavior
                        let _ = tokio::select! {
                            result = close_rx => result,
                            result = close_rx_for_test => result,
                        };
                        let mut guard = close_received_clone.lock().await;
                        *guard = true;
                    }
                }
            });

            let handle = SynchronizerTaskHandle::new(jh, close_tx_for_handle);
            (handle, block_rx)
        }
    }

    fn header_message(block: u8) -> StateSyncMessage<BlockHeader> {
        StateSyncMessage {
            header: BlockHeader {
                number: block as u64,
                hash: Bytes::from(vec![block]),
                parent_hash: Bytes::from(vec![block - 1]),
                revert: false,
                timestamp: 1000,
                partial_block_index: None,
            },
            ..Default::default()
        }
    }

    /// Creates a partial block header message with an ephemeral hash encoding block number and
    /// partial index.
    fn partial_header_message(block: u8, partial_idx: u32) -> StateSyncMessage<BlockHeader> {
        // Ephemeral hash encodes block number and partial index for uniqueness
        let hash_bytes =
            [(block as u64).to_be_bytes().as_slice(), partial_idx.to_be_bytes().as_slice()]
                .concat();
        StateSyncMessage {
            header: BlockHeader {
                number: block as u64,
                hash: Bytes::from(hash_bytes),
                parent_hash: Bytes::from(vec![block - 1]),
                revert: false,
                timestamp: 1000,
                partial_block_index: Some(partial_idx),
            },
            ..Default::default()
        }
    }

    fn revert_header_message(block: u8) -> StateSyncMessage<BlockHeader> {
        StateSyncMessage {
            header: BlockHeader {
                number: block as u64,
                hash: Bytes::from(vec![block]),
                parent_hash: Bytes::from(vec![block - 1]),
                revert: true,
                timestamp: 1000,
                partial_block_index: None,
            },
            ..Default::default()
        }
    }

    /// Builds a full (non-partial) block header. Hash and parent_hash are derived from the given
    /// numbers so that a chain can be built by setting `parent = number - 1`.
    fn full_header(number: u64, hash: u64, parent: u64) -> BlockHeader {
        BlockHeader {
            number,
            hash: Bytes::from(hash.to_be_bytes()),
            parent_hash: Bytes::from(parent.to_be_bytes()),
            revert: false,
            timestamp: 1000,
            partial_block_index: None,
        }
    }

    /// Builds a partial block header with an ephemeral hash derived from number + partial index.
    /// Flashblocks only carry the correct block hash on the last partial (`is_last_partial`), so
    /// mid-block partials have hashes that no later header can link to.
    fn partial_header(number: u64, partial_idx: u32, parent: u64) -> BlockHeader {
        BlockHeader {
            number,
            hash: Bytes::from(
                [number.to_be_bytes().as_slice(), partial_idx.to_be_bytes().as_slice()].concat(),
            ),
            parent_hash: Bytes::from(parent.to_be_bytes()),
            revert: false,
            timestamp: 1000,
            partial_block_index: Some(partial_idx),
        }
    }

    /// Builds the last partial of a block: still a partial, but carrying the sealed block hash
    /// (same 8-byte scheme as `full_header`).
    fn sealed_partial_header(number: u64, partial_idx: u32, parent: u64) -> BlockHeader {
        BlockHeader {
            number,
            hash: Bytes::from(number.to_be_bytes()),
            parent_hash: Bytes::from(parent.to_be_bytes()),
            revert: false,
            timestamp: 1000,
            partial_block_index: Some(partial_idx),
        }
    }

    /// Builds a `SynchronizerStream` pinned to a given state, for exercising state-transition
    /// logic without a live synchronizer. The receiver is never polled by these tests.
    fn stream_in_state(name: &str, state: SynchronizerState) -> SynchronizerStream {
        let (_tx, rx) = mpsc::channel(1);
        let id = ExtractorIdentity { chain: Chain::Ethereum, name: name.to_string() };
        let mut stream = SynchronizerStream::new(&id, rx);
        stream.state = state;
        stream
    }

    async fn receive_message(rx: &mut Receiver<BlockSyncResult<FeedMessage>>) -> FeedMessage {
        timeout(Duration::from_millis(100), rx.recv())
            .await
            .expect("Responds in time")
            .expect("Should receive first message")
            .expect("No error")
    }

    async fn setup_block_sync(
    ) -> (MockStateSync, MockStateSync, JoinHandle<()>, Receiver<BlockSyncResult<FeedMessage>>)
    {
        setup_block_sync_with_behaviour(MockBehavior::Normal, MockBehavior::Normal).await
    }

    // Starts up a synchronizer and consumes the first message on block 1.
    async fn setup_block_sync_with_behaviour(
        v2_behavior: MockBehavior,
        v3_behavior: MockBehavior,
    ) -> (MockStateSync, MockStateSync, JoinHandle<()>, Receiver<BlockSyncResult<FeedMessage>>)
    {
        let v2_sync = MockStateSync::with_behavior(v2_behavior);
        let v3_sync = MockStateSync::with_behavior(v3_behavior);

        // Use reasonable timeouts to observe proper state transitions
        let mut block_sync = BlockSynchronizer::new(
            Duration::from_millis(20), // block_time
            Duration::from_millis(10), // max_wait
            3,                         // max_missed_blocks (stale threshold = 20ms * 3 = 60ms)
        );
        block_sync.max_messages(10); // Allow enough messages to see the progression

        let block_sync = block_sync
            .register_synchronizer(
                ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v2".to_string() },
                v2_sync.clone(),
            )
            .register_synchronizer(
                ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v3".to_string() },
                v3_sync.clone(),
            );

        // Send initial messages to both synchronizers
        let block1_msg = header_message(1);
        let _ = v2_sync
            .send_header(block1_msg.clone())
            .await;
        let _ = v3_sync
            .send_header(block1_msg.clone())
            .await;

        // Start the block synchronizer
        let (nanny_handle, mut rx) = block_sync
            .run()
            .await
            .expect("BlockSynchronizer failed to start");

        let first_feed_msg = receive_message(&mut rx).await;
        assert_eq!(first_feed_msg.state_msgs.len(), 2);
        assert!(matches!(
            first_feed_msg
                .sync_states
                .get("uniswap-v2")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));
        assert!(matches!(
            first_feed_msg
                .sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));

        (v2_sync, v3_sync, nanny_handle, rx)
    }

    async fn shutdown_block_synchronizer(
        nanny_handle: JoinHandle<()>,
        rx: Receiver<BlockSyncResult<FeedMessage>>,
    ) {
        // Dropping the receiver causes the main loop's next send to fail, which exits
        // the loop. The nanny then calls cleanup_synchronizers, which sends close signals
        // to the synchronizer tasks via their handle-side channels.
        drop(rx);
        timeout(Duration::from_secs(2), nanny_handle)
            .await
            .expect("Nanny failed to exit within time")
            .expect("Nanny panicked");
    }

    /// Send message to sync and assert it transitions to Ready at expected block/partial
    async fn send_and_assert_ready(
        sync: &MockStateSync,
        sync_name: &str,
        rx: &mut Receiver<BlockSyncResult<FeedMessage>>,
        msg: StateSyncMessage<BlockHeader>,
        expected_block: u64,
        expected_partial: Option<u32>,
    ) {
        sync.send_header(msg)
            .await
            .expect("send failed");
        let feed_msg = receive_message(rx).await;
        let state = feed_msg
            .sync_states
            .get(sync_name)
            .unwrap();
        match state {
            SynchronizerState::Ready(h) => {
                assert_eq!(h.number, expected_block, "wrong block number");
                assert_eq!(h.partial_block_index, expected_partial, "wrong partial index");
            }
            other => panic!("expected Ready, got {:?}", other),
        }
    }

    #[test(tokio::test)]
    async fn test_two_ready_synchronizers() {
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        let second_msg = header_message(2);
        v2_sync
            .send_header(second_msg.clone())
            .await
            .expect("send_header failed");
        v3_sync
            .send_header(second_msg.clone())
            .await
            .expect("send_header failed");
        let second_feed_msg = receive_message(&mut rx).await;

        let exp2 = FeedMessage {
            state_msgs: [
                ("uniswap-v2".to_string(), second_msg.clone()),
                ("uniswap-v3".to_string(), second_msg.clone()),
            ]
            .into_iter()
            .collect(),
            sync_states: [
                ("uniswap-v3".to_string(), SynchronizerState::Ready(second_msg.header.clone())),
                ("uniswap-v2".to_string(), SynchronizerState::Ready(second_msg.header.clone())),
            ]
            .into_iter()
            .collect(),
        };
        assert_eq!(second_feed_msg, exp2);

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    /// Regression test for the "Reverting block's insert position not found! History exceeded"
    /// crash seen on Base with flashblocks enabled.
    ///
    /// When one synchronizer races ahead (e.g. one partial block), it is classified `Advanced`
    /// and the block history is reinitialized. If the reinit discards the previously retained
    /// history, a subsequent revert to a block *below* the advanced tip can no longer find its
    /// fork point and the whole stream terminates. Reinit must preserve the prior history so the
    /// revert still resolves.
    #[test]
    fn test_reinit_preserves_history_for_revert_below_advanced_tip() {
        // Old history: connected chain 323 -> 324 -> 325 (hash == number).
        let old_blocks = vec![
            full_header(323, 323, 322),
            full_header(324, 324, 323),
            full_header(325, 325, 324),
        ];
        let mut old_history = BlockHistory::new(old_blocks, 15).unwrap();

        // One stream raced ahead to 326 (connected to 325) -> Advanced, triggering reinit.
        // Another stream is still at 325 (Delayed).
        let mut streams = vec![
            stream_in_state("aerodrome", SynchronizerState::Advanced(full_header(326, 326, 325))),
            stream_in_state("uniswap_v3", SynchronizerState::Delayed(full_header(325, 325, 324))),
        ];

        let mut new_history = BlockSynchronizer::<MockStateSync>::reinit_block_history(
            &mut streams,
            &mut old_history,
        )
        .expect("reinit failed");

        // A revert to block 325 must still find its fork point (324) in the retained history.
        let revert = BlockHeader {
            number: 325,
            hash: Bytes::from(325u64.to_be_bytes()),
            parent_hash: Bytes::from(324u64.to_be_bytes()),
            revert: true,
            timestamp: 1000,
            partial_block_index: None,
        };
        new_history
            .push(revert)
            .expect("revert below advanced tip must not exceed history");
    }

    /// Preserving history must not resurrect blocks across a real gap. When the advanced block is
    /// genuinely detached (e.g. a synchronizer restarted and jumped ahead), the retained blocks do
    /// not connect to it and must still be discarded, leaving the history rooted at the advanced
    /// block rather than stitching together a discontinuous chain.
    #[test]
    fn test_reinit_discards_retained_history_on_detached_advanced_block() {
        let old_blocks = vec![
            full_header(323, 323, 322),
            full_header(324, 324, 323),
            full_header(325, 325, 324),
        ];
        let mut old_history = BlockHistory::new(old_blocks, BLOCK_HISTORY_SIZE).unwrap();

        // Advanced block is far ahead and its parent is unknown to the retained history.
        let mut streams = vec![stream_in_state(
            "aerodrome",
            SynchronizerState::Advanced(full_header(400, 400, 399)),
        )];

        let new_history = BlockSynchronizer::<MockStateSync>::reinit_block_history(
            &mut streams,
            &mut old_history,
        )
        .expect("reinit failed");

        let retained: Vec<u64> = new_history
            .blocks()
            .map(|b| b.number)
            .collect();
        assert_eq!(
            retained,
            vec![400],
            "detached advanced block must not be stitched to old history"
        );
    }

    /// Companion regression test for the same crash with a *partial* advanced block — the
    /// variant actually running on Base (the only chain with `--partial-blocks`).
    ///
    /// The retained tip is a mid-block partial whose ephemeral hash differs from the sealed
    /// block hash (flashblocks only carry the correct hash on the last partial). The advanced
    /// partial of the next block links to the sealed hash, so the hash-based stitch in
    /// `BlockHistory::new` cannot connect it to anything retained and the rebuilt history is
    /// rooted at the advanced partial alone — every fork point below it is lost.
    #[test]
    fn test_reinit_preserves_history_for_partial_advanced_block() {
        // Old history: sealed 323 -> sealed 324 -> mid-block partial of 325 (ephemeral hash).
        let old_blocks = vec![
            full_header(323, 323, 322),
            full_header(324, 324, 323),
            partial_header(325, 2, 324),
        ];
        let mut old_history = BlockHistory::new(old_blocks, BLOCK_HISTORY_SIZE).unwrap();

        // A stream races ahead by one partial: first partial of 326, parented on the sealed
        // hash of 325, which the history never saw. This is what classifies it Advanced.
        let advanced = partial_header(326, 0, 325);
        assert_eq!(
            old_history
                .determine_block_position(&advanced)
                .unwrap(),
            BlockPosition::Advanced
        );

        let mut streams = vec![
            stream_in_state("aerodrome", SynchronizerState::Advanced(advanced)),
            stream_in_state("uniswap_v3", SynchronizerState::Delayed(partial_header(325, 2, 324))),
        ];

        let new_history = BlockSynchronizer::<MockStateSync>::reinit_block_history(
            &mut streams,
            &mut old_history,
        )
        .expect("reinit failed");

        let retained: Vec<u64> = new_history
            .blocks()
            .map(|b| b.number)
            .collect();
        assert_eq!(retained, vec![323, 324, 325, 326]);
    }

    /// Full prod sequence behind the Base outages: partial-advanced reinit, the stream proceeds
    /// for one more block, then a shallow (1-block) revert arrives. The revert must resolve;
    /// in prod it drained the whole history and killed the feed with "Reverting block's insert
    /// position not found! History exceeded".
    #[test]
    fn test_revert_below_tip_resolves_after_partial_advanced_reinit() {
        let old_blocks = vec![
            full_header(323, 323, 322),
            full_header(324, 324, 323),
            partial_header(325, 2, 324),
        ];
        let mut old_history = BlockHistory::new(old_blocks, BLOCK_HISTORY_SIZE).unwrap();

        let mut streams = vec![
            stream_in_state("aerodrome", SynchronizerState::Advanced(partial_header(326, 0, 325))),
            stream_in_state("uniswap_v3", SynchronizerState::Delayed(partial_header(325, 2, 324))),
        ];

        let mut new_history = BlockSynchronizer::<MockStateSync>::reinit_block_history(
            &mut streams,
            &mut old_history,
        )
        .expect("reinit failed");

        // The stream proceeds normally: the last partial seals 326 with the correct hash, then
        // the first partial of 327 arrives on top of it.
        new_history
            .push(sealed_partial_header(326, 5, 325))
            .expect("sealed partial push failed");
        new_history
            .push(partial_header(327, 0, 326))
            .expect("next partial push failed");

        // The chain reorgs one block: revert to sealed 326. Its fork point is block 325, which
        // the client saw (as a partial) and which the reinit must have retained.
        let revert = BlockHeader {
            number: 326,
            hash: Bytes::from(326u64.to_be_bytes()),
            parent_hash: Bytes::from(325u64.to_be_bytes()),
            revert: true,
            timestamp: 1000,
            partial_block_index: None,
        };
        new_history
            .push(revert)
            .expect("1-block revert after partial-advanced reinit must resolve");

        // The drain must stop exactly at the retained partial fork point (325), not overshoot
        // it or stop early at some other same-height block.
        let retained: Vec<u64> = new_history
            .blocks()
            .map(|b| b.number)
            .collect();
        assert_eq!(retained, vec![323, 324, 325, 326]);
        let latest = new_history.latest().unwrap();
        assert_eq!(latest.number, 326);
        assert!(latest.revert);
        assert!(!latest.is_partial());
    }

    #[test(tokio::test)]
    async fn test_delayed_synchronizer_catches_up() {
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Send block 2 to v2 synchronizer only
        let block2_msg = header_message(2);
        v2_sync
            .send_header(block2_msg.clone())
            .await
            .expect("send_header failed");

        // Consume second message - v3 should be delayed
        let second_feed_msg = receive_message(&mut rx).await;
        debug!("Consumed second message for v2");

        assert!(second_feed_msg
            .state_msgs
            .contains_key("uniswap-v2"));
        assert!(matches!(
            second_feed_msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Ready(header) if header.number == 2
        ));
        assert!(!second_feed_msg
            .state_msgs
            .contains_key("uniswap-v3"));
        assert!(matches!(
            second_feed_msg.sync_states.get("uniswap-v3").unwrap(),
            SynchronizerState::Delayed(header) if header.number == 1
        ));

        // Now v3 catches up to block 2
        v3_sync
            .send_header(block2_msg.clone())
            .await
            .expect("send_header failed");

        // Both advance to block 3
        let block3_msg = header_message(3);
        v2_sync
            .send_header(block3_msg.clone())
            .await
            .expect("send_header failed");
        v3_sync
            .send_header(block3_msg)
            .await
            .expect("send_header failed");

        // Consume messages until we get both synchronizers on block 3
        // We may get an intermediate message for v3's catch-up or a combined message
        let mut third_feed_msg = receive_message(&mut rx).await;

        // If this message doesn't have both univ2, it's an intermediate message, so we get the next
        // one
        if !third_feed_msg
            .state_msgs
            .contains_key("uniswap-v2")
        {
            third_feed_msg = rx
                .recv()
                .await
                .expect("header channel was closed")
                .expect("no error");
        }
        assert!(third_feed_msg
            .state_msgs
            .contains_key("uniswap-v2"));
        assert!(third_feed_msg
            .state_msgs
            .contains_key("uniswap-v3"));
        assert!(matches!(
            third_feed_msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Ready(header) if header.number == 3
        ));
        assert!(matches!(
            third_feed_msg.sync_states.get("uniswap-v3").unwrap(),
            SynchronizerState::Ready(header) if header.number == 3
        ));

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_different_start_blocks() {
        let v2_sync = MockStateSync::new();
        let v3_sync = MockStateSync::new();
        let block_sync = BlockSynchronizer::with_short_timeouts()
            .register_synchronizer(
                ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v2".to_string() },
                v2_sync.clone(),
            )
            .register_synchronizer(
                ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v3".to_string() },
                v3_sync.clone(),
            );

        // Initial messages - synchronizers at different blocks
        let block1_msg = header_message(1);
        let block2_msg = header_message(2);

        let _ = v2_sync
            .send_header(block1_msg.clone())
            .await;
        v3_sync
            .send_header(block2_msg.clone())
            .await
            .expect("send_header failed");

        // Start the block synchronizer - it should use block 2 as the starting block
        let (jh, mut rx) = block_sync
            .run()
            .await
            .expect("BlockSynchronizer failed to start.");

        // Consume first message
        let first_feed_msg = receive_message(&mut rx).await;
        assert!(matches!(
            first_feed_msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Delayed(header) if header.number == 1
        ));
        assert!(matches!(
            first_feed_msg.sync_states.get("uniswap-v3").unwrap(),
            SynchronizerState::Ready(header) if header.number == 2
        ));

        // Now v2 catches up to block 2
        v2_sync
            .send_header(block2_msg.clone())
            .await
            .expect("send_header failed");

        // Both advance to block 3
        let block3_msg = header_message(3);
        let _ = v2_sync
            .send_header(block3_msg.clone())
            .await;
        v3_sync
            .send_header(block3_msg.clone())
            .await
            .expect("send_header failed");

        // Consume third message - both should be on block 3
        let second_feed_msg = receive_message(&mut rx).await;
        assert_eq!(second_feed_msg.state_msgs.len(), 2);
        assert!(matches!(
            second_feed_msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Ready(header) if header.number == 3
        ));
        assert!(matches!(
            second_feed_msg.sync_states.get("uniswap-v3").unwrap(),
            SynchronizerState::Ready(header) if header.number == 3
        ));

        shutdown_block_synchronizer(jh, rx).await;
    }

    #[test(tokio::test)]
    async fn test_synchronizer_fails_other_goes_stale() {
        let (_v2_sync, v3_sync, nanny_handle, mut sync_rx) =
            setup_block_sync_with_behaviour(MockBehavior::ExitImmediately, MockBehavior::Normal)
                .await;

        let mut error_reported = false;
        for _ in 0..3 {
            if let Some(msg) = sync_rx.recv().await {
                match msg {
                    Err(_) => error_reported = true,
                    Ok(msg) => {
                        assert!(matches!(
                            msg.sync_states
                                .get("uniswap-v3")
                                .unwrap(),
                            SynchronizerState::Delayed(_)
                        ));
                        assert!(matches!(
                            msg.sync_states
                                .get("uniswap-v2")
                                .unwrap(),
                            SynchronizerState::Ended(_)
                        ));
                    }
                }
            }
        }
        assert!(error_reported, "BlockSynchronizer did not report final error");

        // Wait for nanny to detect task failure and execute cleanup
        let result = timeout(Duration::from_secs(2), nanny_handle).await;
        assert!(result.is_ok(), "Nanny should complete when synchronizer task exits");

        // Verify that the remaining synchronizer received close signal during cleanup
        assert!(
            v3_sync.was_close_received().await,
            "v3_sync should have received close signal during cleanup"
        );
    }

    #[test(tokio::test)]
    async fn test_cleanup_timeout_warning() {
        // Verify that cleanup_synchronizers emits a warning when synchronizers timeout during
        // cleanup
        let (_v2_sync, _v3_sync, nanny_handle, _rx) = setup_block_sync_with_behaviour(
            MockBehavior::ExitImmediately,
            MockBehavior::IgnoreClose,
        )
        .await;

        // Wait for nanny to complete - cleanup should timeout on v3_sync but still complete
        let result = timeout(Duration::from_secs(10), nanny_handle).await;
        assert!(
            result.is_ok(),
            "Nanny should complete even when some synchronizers timeout during cleanup"
        );

        // Note: In a real test environment, we would capture log output to verify the warning was
        // emitted. Since this is a unit test without log capture setup, we just verify that
        // cleanup completes even when some synchronizers timeout.
    }

    #[test(tokio::test)]
    async fn test_one_synchronizer_goes_stale_while_other_works() {
        // Test Case 1: One protocol goes stale and is removed while another protocol works normally
        let (_v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Send block 2 only to v3, v2 will timeout and become delayed
        let block2_msg = header_message(2);
        let _ = v3_sync
            .send_header(block2_msg.clone())
            .await;
        // Don't send to v2_sync - it will timeout

        // Consume second message - v2 should be delayed, v3 ready
        let second_feed_msg = receive_message(&mut rx).await;
        assert!(second_feed_msg
            .state_msgs
            .contains_key("uniswap-v3"));
        assert!(!second_feed_msg
            .state_msgs
            .contains_key("uniswap-v2"));
        assert!(matches!(
            second_feed_msg
                .sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));
        // v2 should be delayed (if still present) - check nanny is still running
        if let Some(v2_state) = second_feed_msg
            .sync_states
            .get("uniswap-v2")
        {
            if matches!(v2_state, SynchronizerState::Delayed(_)) {
                // Verify nanny is still running when synchronizer is just delayed
                assert!(
                    !nanny_handle.is_finished(),
                    "Nanny should still be running when synchronizer is delayed (not stale yet)"
                );
            }
        }

        // Wait a bit, then continue sending blocks to v3 but not v2
        tokio::time::sleep(Duration::from_millis(15)).await;

        // Continue sending blocks only to v3 to keep it healthy while v2 goes stale
        let block3_msg = header_message(3);
        let _ = v3_sync
            .send_header(block3_msg.clone())
            .await;

        tokio::time::sleep(Duration::from_millis(40)).await;

        let mut stale_found = false;
        for _ in 0..2 {
            if let Some(Ok(msg)) = rx.recv().await {
                if let Some(SynchronizerState::Stale(_)) = msg.sync_states.get("uniswap-v2") {
                    stale_found = true;
                }
            }
        }
        assert!(stale_found, "v2 synchronizer should be stale");

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_all_synchronizers_stale_loop_continues() {
        // When all synchronizers go stale simultaneously (simulating a WS reconnect), the
        // main loop must NOT exit — it should keep running and wait for recovery.
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Stop sending messages — both should timeout, go Delayed, then Stale.
        let mut seen_delayed = false;
        let mut seen_stale = false;
        let start_time = tokio::time::Instant::now();

        while let Ok(Some(Ok(msg))) =
            tokio::time::timeout(Duration::from_millis(50), rx.recv()).await
        {
            let v2_state = msg.sync_states.get("uniswap-v2");
            let v3_state = msg.sync_states.get("uniswap-v3");

            if !seen_delayed &&
                (matches!(v2_state, Some(SynchronizerState::Delayed(_))) ||
                    matches!(v3_state, Some(SynchronizerState::Delayed(_))))
            {
                seen_delayed = true;
                assert!(
                    !nanny_handle.is_finished(),
                    "Nanny must still run when synchronizers are Delayed"
                );
            }

            if matches!(v2_state, Some(SynchronizerState::Stale(_))) &&
                matches!(v3_state, Some(SynchronizerState::Stale(_)))
            {
                seen_stale = true;
                assert!(
                    !nanny_handle.is_finished(),
                    "Main loop must not exit when all synchronizers are Stale (awaiting recovery)"
                );
                break;
            }

            if start_time.elapsed() > Duration::from_millis(500) {
                break;
            }
        }

        assert!(seen_delayed, "Synchronizers should transition through Delayed first");
        assert!(seen_stale, "Both synchronizers should reach Stale state");

        // Simulate the underlying synchronizer tasks permanently dying:
        // trigger_close makes the mock tasks exit (dropping their tx clones), and
        // dropping the MockStateSyncs closes the original sender side.
        // This causes SynchronizerStream.rx to return None → Ended → check_streams error.
        v2_sync.trigger_close().await;
        v3_sync.trigger_close().await;
        drop(v2_sync);
        drop(v3_sync);

        // Now the main loop should detect all-ended and report an error.
        let mut error_reported = false;
        while let Some(msg) = rx.recv().await {
            if msg.is_err() {
                error_reported = true;
            }
        }
        assert!(error_reported, "Expected an error after all synchronizers ended");

        let nanny_result = timeout(Duration::from_secs(2), nanny_handle).await;
        assert!(nanny_result.is_ok(), "Nanny should complete after all synchronizers ended");
    }

    #[test(tokio::test)]
    async fn test_all_synchronizers_recover_after_going_stale() {
        // Simulates a full WS reconnect: both synchronizers go stale, then reconnect
        // and send an advanced block. The main loop should rebase block history and resume.
        let v2_sync = MockStateSync::new();
        let v3_sync = MockStateSync::new();
        let block_sync =
            BlockSynchronizer::new(Duration::from_millis(20), Duration::from_millis(10), 3)
                .register_synchronizer(
                    ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v2".to_string() },
                    v2_sync.clone(),
                )
                .register_synchronizer(
                    ExtractorIdentity { chain: Chain::Ethereum, name: "uniswap-v3".to_string() },
                    v3_sync.clone(),
                );

        v2_sync
            .send_header(header_message(1))
            .await
            .unwrap();
        v3_sync
            .send_header(header_message(1))
            .await
            .unwrap();

        let (nanny_handle, mut rx) = block_sync
            .run()
            .await
            .expect("BlockSynchronizer start failed");

        let first_msg = receive_message(&mut rx).await;
        assert!(matches!(
            first_msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Ready(h) if h.number == 1
        ));
        assert!(matches!(
            first_msg.sync_states.get("uniswap-v3").unwrap(),
            SynchronizerState::Ready(h) if h.number == 1
        ));

        // Stop sending messages — both should go Stale.
        let mut seen_stale = false;
        let start_time = tokio::time::Instant::now();
        while let Ok(Some(Ok(msg))) =
            tokio::time::timeout(Duration::from_millis(50), rx.recv()).await
        {
            let v2 = msg
                .sync_states
                .get("uniswap-v2")
                .unwrap();
            let v3 = msg
                .sync_states
                .get("uniswap-v3")
                .unwrap();
            if matches!(v2, SynchronizerState::Stale(_)) &&
                matches!(v3, SynchronizerState::Stale(_))
            {
                seen_stale = true;
                assert!(
                    !nanny_handle.is_finished(),
                    "Main loop must not exit while synchronizers are Stale"
                );
                break;
            }
            if start_time.elapsed() > Duration::from_millis(500) {
                break;
            }
        }
        assert!(seen_stale, "Both synchronizers should go Stale");

        // Simulate reconnect: send block 5 (advanced — not connected to block 1).
        v2_sync
            .send_header(header_message(5))
            .await
            .unwrap();
        v3_sync
            .send_header(header_message(5))
            .await
            .unwrap();

        // The main loop should detect the advanced blocks, rebase block history, and
        // reclassify both synchronizers as Ready at block 5.
        let mut recovered = false;
        for _ in 0..20 {
            let msg = receive_message(&mut rx).await;
            let v2 = msg
                .sync_states
                .get("uniswap-v2")
                .unwrap();
            let v3 = msg
                .sync_states
                .get("uniswap-v3")
                .unwrap();
            if matches!(v2, SynchronizerState::Ready(h) if h.number == 5) &&
                matches!(v3, SynchronizerState::Ready(h) if h.number == 5)
            {
                recovered = true;
                break;
            }
        }
        assert!(recovered, "Both synchronizers should recover to Ready at block 5");

        // Drop rx to signal the main loop to stop, then await nanny cleanup.
        drop(rx);
        timeout(Duration::from_secs(2), nanny_handle)
            .await
            .expect("Nanny timed out")
            .expect("Nanny panicked");
    }

    #[test(tokio::test)]
    async fn test_stale_synchronizer_recovers() {
        // Test Case 2: All protocols go stale and main loop exits gracefully
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Send second messages to v2 only, shortly before both would go stale
        tokio::time::sleep(Duration::from_millis(50)).await;
        let block2_msg = header_message(2);
        let _ = v2_sync
            .send_header(block2_msg.clone())
            .await;

        // we should get two messages here
        for _ in 0..2 {
            if let Some(msg) = rx.recv().await {
                if let Ok(msg) = msg {
                    if matches!(
                        msg.sync_states
                            .get("uniswap-v2")
                            .unwrap(),
                        SynchronizerState::Ready(_)
                    ) {
                        assert!(matches!(
                            msg.sync_states
                                .get("uniswap-v3")
                                .unwrap(),
                            SynchronizerState::Delayed(_)
                        ));
                        break;
                    };
                }
            } else {
                panic!("Channel closed unexpectedly")
            }
        }

        // Now v3 should be stale
        tokio::time::sleep(Duration::from_millis(15)).await;
        let block3_msg = header_message(3);
        let _ = v2_sync
            .send_header(block3_msg.clone())
            .await;
        let third_msg = receive_message(&mut rx).await;
        dbg!(&third_msg);
        assert!(matches!(
            third_msg
                .sync_states
                .get("uniswap-v2")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));
        assert!(matches!(
            third_msg
                .sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Stale(_)
        ));

        let block4_msg = header_message(4);
        let _ = v3_sync
            .send_header(block2_msg.clone())
            .await;
        let _ = v3_sync
            .send_header(block3_msg.clone())
            .await;
        let _ = v3_sync
            .send_header(block4_msg.clone())
            .await;
        let _ = v2_sync
            .send_header(block4_msg.clone())
            .await;
        let fourth_msg = receive_message(&mut rx).await;
        assert!(matches!(
            fourth_msg
                .sync_states
                .get("uniswap-v2")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));
        assert!(matches!(
            fourth_msg
                .sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Ready(_)
        ));

        shutdown_block_synchronizer(nanny_handle, rx).await;

        // Verify cleanup was triggered for both synchronizers
        assert!(
            v2_sync.was_close_received().await,
            "v2_sync should have received close signal during cleanup"
        );
        assert!(
            v3_sync.was_close_received().await,
            "v3_sync should have received close signal during cleanup"
        );
    }

    #[test(tokio::test)]
    async fn test_all_synchronizer_advanced() {
        // Test the case were all synchronizers successfully recover but stream
        // from a disconnected future block.

        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        let block3 = header_message(3);
        v2_sync
            .send_header(block3.clone())
            .await
            .unwrap();
        v3_sync
            .send_header(block3)
            .await
            .unwrap();

        let msg = receive_message(&mut rx).await;
        matches!(
            msg.sync_states
                .get("uniswap-v2")
                .unwrap(),
            SynchronizerState::Ready(_)
        );
        matches!(
            msg.sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Ready(_)
        );

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_one_synchronizer_advanced() {
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        let block2 = header_message(2);
        let block4 = header_message(4);
        v2_sync
            .send_header(block4.clone())
            .await
            .unwrap();
        v3_sync
            .send_header(block2.clone())
            .await
            .unwrap();

        let msg = receive_message(&mut rx).await;
        matches!(
            msg.sync_states
                .get("uniswap-v2")
                .unwrap(),
            SynchronizerState::Ready(_)
        );
        matches!(
            msg.sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Delayed(_)
        );

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_partial_blocks_normal_operation() {
        // Normal operation: partials with arbitrary index increments, then advance to next block
        // Scenario: block 1 → partials 0,3,7 for block 2 → partials 0,2 for block 3
        let (v2_sync, _v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Partials for block 2 with arbitrary increments (only v2, v3 ignored)
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(2, 0),
            2,
            Some(0),
        )
        .await;
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(2, 3),
            2,
            Some(3),
        )
        .await;
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(2, 7),
            2,
            Some(7),
        )
        .await;

        // Advance to block 3 with partials
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(3, 0),
            3,
            Some(0),
        )
        .await;
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(3, 2),
            3,
            Some(2),
        )
        .await;

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_partial_blocks_handles_reverts() {
        // Revert resets state and allows continuation on new fork with full blocks
        // Scenario: block 1 → block 2 → partials for block 3 → revert to 2 → full block 3
        let (v2_sync, _v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // Advance to full block 2 (only v2, v3 ignored)
        send_and_assert_ready(&v2_sync, "uniswap-v2", &mut rx, header_message(2), 2, None).await;

        // Partials for block 3
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(3, 0),
            3,
            Some(0),
        )
        .await;
        send_and_assert_ready(
            &v2_sync,
            "uniswap-v2",
            &mut rx,
            partial_header_message(3, 2),
            3,
            Some(2),
        )
        .await;

        // Revert to block 2
        send_and_assert_ready(&v2_sync, "uniswap-v2", &mut rx, revert_header_message(2), 2, None)
            .await;

        // New fork: full block 3
        send_and_assert_ready(&v2_sync, "uniswap-v2", &mut rx, header_message(3), 3, None).await;

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }

    #[test(tokio::test)]
    async fn test_partial_blocks_delayed_synchronizer_catches_up() {
        // Delayed synchronizer catches up when receiving partial blocks
        // Scenario: v2 receives partials while v3 is delayed, then v3 catches up
        let (v2_sync, v3_sync, nanny_handle, mut rx) = setup_block_sync().await;

        // v2 receives partial 0 for block 2; v3 times out and becomes Delayed
        let partial_0 = partial_header_message(2, 0);
        v2_sync
            .send_header(partial_0.clone())
            .await
            .expect("send partial 0 failed");

        let msg = receive_message(&mut rx).await;
        // v2 is Ready with partial 0, v3 is Delayed
        assert!(msg
            .state_msgs
            .contains_key("uniswap-v2"));
        assert!(!msg
            .state_msgs
            .contains_key("uniswap-v3"));
        assert!(matches!(
            msg.sync_states.get("uniswap-v2").unwrap(),
            SynchronizerState::Ready(h) if h.partial_block_index == Some(0)
        ));
        assert!(matches!(
            msg.sync_states
                .get("uniswap-v3")
                .unwrap(),
            SynchronizerState::Delayed(_)
        ));

        // v2 advances to partial 2; v3 catches up by sending partial 0 then partial 2
        let partial_2 = partial_header_message(2, 2);
        v2_sync
            .send_header(partial_2.clone())
            .await
            .expect("send partial 2 failed");
        v3_sync
            .send_header(partial_0.clone())
            .await
            .expect("v3 catch up partial 0 failed");
        v3_sync
            .send_header(partial_2.clone())
            .await
            .expect("v3 catch up partial 2 failed");

        // v3 catches up within a few message cycles
        let mut v3_ready = false;
        for _ in 0..3 {
            let msg = receive_message(&mut rx).await;
            if matches!(
                msg.sync_states.get("uniswap-v3").unwrap(),
                SynchronizerState::Ready(h) if h.partial_block_index == Some(2)
            ) {
                v3_ready = true;
                break;
            }
        }
        assert!(v3_ready, "v3 caught up to partial 2");

        shutdown_block_synchronizer(nanny_handle, rx).await;
    }
}