[−][src]Struct trellis_m4::sercom::SPIMaster4Padout

pub struct SPIMaster4Padout<MISO, MOSI, SCK> { /* fields omitted */ }

A pad mapping configuration for the SERCOM in SPI master mode.

This type can only be constructed using the From implementations in this module, which are restricted to valid configurations.

Defines which sercom pad is mapped to which SPI function.

Trait Implementations

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>)> for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad0<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>)> for SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad0<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad2<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>)> for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad2<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad1<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>)> for SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad1<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad1<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>)> for SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad1<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>)> for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad0<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>)> for SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad0<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> From<(Sercom4Pad3<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>)> for SPIMaster4Padout<Sercom4Pad3<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

Convert from a tuple of (MISO, MOSI, SCK) to SPIMasterXPadout

`fn from( pads: (Sercom4Pad3<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>) ) -> SPIMaster4Padout<Sercom4Pad3<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad2<PIN1>, Sercom4Pad3<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad0<PIN0>, Sercom4Pad3<PIN1>, Sercom4Pad1<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad1<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad3<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad1<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

`impl<PIN0, PIN1, PIN2> DipoDopo for SPIMaster4Padout<Sercom4Pad2<PIN0>, Sercom4Pad0<PIN1>, Sercom4Pad3<PIN2>>`[src]

`fn dipo_dopo(&self) -> (u8, u8)`[src]

Auto Trait Implementations

`impl<MISO, MOSI, SCK> Unpin for SPIMaster4Padout<MISO, MOSI, SCK> where MISO: Unpin, MOSI: Unpin, SCK: Unpin,`

`impl<MISO, MOSI, SCK> Sync for SPIMaster4Padout<MISO, MOSI, SCK> where MISO: Sync, MOSI: Sync, SCK: Sync,`

`impl<MISO, MOSI, SCK> Send for SPIMaster4Padout<MISO, MOSI, SCK> where MISO: Send, MOSI: Send, SCK: Send,`

Blanket Implementations

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

The type returned in the event of a conversion error.

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Same<T> for T`

`type Output = T`

Should always be Self