pub struct TemperatureIrV2Bricklet { /* private fields */ }
Expand description
Measures contactless object temperature between -70°C and +380°C
Implementations
sourceimpl TemperatureIrV2Bricklet
impl TemperatureIrV2Bricklet
pub const DEVICE_IDENTIFIER: u16 = 291u16
pub const DEVICE_DISPLAY_NAME: &'static str = "Temperature IR Bricklet 2.0"
sourcepub fn new(uid: &str, ip_connection: &IpConnection) -> TemperatureIrV2Bricklet
pub fn new(uid: &str, ip_connection: &IpConnection) -> TemperatureIrV2Bricklet
Creates an object with the unique device ID uid
. This object can then be used after the IP Connection ip_connection
is connected.
sourcepub fn get_response_expected(
&mut self,
fun: TemperatureIrV2BrickletFunction
) -> Result<bool, GetResponseExpectedError>
pub fn get_response_expected(
&mut self,
fun: TemperatureIrV2BrickletFunction
) -> Result<bool, GetResponseExpectedError>
Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.
For getter functions this is enabled by default and cannot be disabled, because those
functions will always send a response. For callback configuration functions it is enabled
by default too, but can be disabled by set_response_expected
.
For setter functions it is disabled by default and can be enabled.
Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.
See set_response_expected
for the list of function ID constants available for this function.
sourcepub fn set_response_expected(
&mut self,
fun: TemperatureIrV2BrickletFunction,
response_expected: bool
) -> Result<(), SetResponseExpectedError>
pub fn set_response_expected(
&mut self,
fun: TemperatureIrV2BrickletFunction,
response_expected: bool
) -> Result<(), SetResponseExpectedError>
Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.
Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.
sourcepub fn set_response_expected_all(&mut self, response_expected: bool)
pub fn set_response_expected_all(&mut self, response_expected: bool)
Changes the response expected flag for all setter and callback configuration functions of this device at once.
sourcepub fn get_ambient_temperature_callback_receiver(
&self
) -> ConvertingCallbackReceiver<i16>
pub fn get_ambient_temperature_callback_receiver(
&self
) -> ConvertingCallbackReceiver<i16>
This receiver is triggered periodically according to the configuration set by
Set Ambient Temperature Receiver Configuration
.
The parameter is the same as Get Ambient Temperature
.
sourcepub fn get_object_temperature_callback_receiver(
&self
) -> ConvertingCallbackReceiver<i16>
pub fn get_object_temperature_callback_receiver(
&self
) -> ConvertingCallbackReceiver<i16>
This receiver is triggered periodically according to the configuration set by
Set Object Temperature Receiver Configuration
.
The parameter is the same as Get Object Temperature
.
sourcepub fn get_ambient_temperature(&self) -> ConvertingReceiver<i16>
pub fn get_ambient_temperature(&self) -> ConvertingReceiver<i16>
Returns the ambient temperature of the sensor. The value has a range of -400 to 1250 and is given in °C/10, e.g. a value of 423 means that an ambient temperature of 42.3 °C is measured.
If you want to get the ambient temperature periodically, it is recommended
to use the get_ambient_temperature_callback_receiver
receiver and set the period with
Set Ambient Temperature Receiver Configuration
.
If you want to get the value periodically, it is recommended to use the
get_ambient_temperature_callback_receiver
receiver. You can set the receiver configuration
with Set Ambient Temperature Receiver Configuration
.
sourcepub fn set_ambient_temperature_callback_configuration(
&self,
period: u32,
value_has_to_change: bool,
option: char,
min: i16,
max: i16
) -> ConvertingReceiver<()>
pub fn set_ambient_temperature_callback_configuration(
&self,
period: u32,
value_has_to_change: bool,
option: char,
min: i16,
max: i16
) -> ConvertingReceiver<()>
The period in ms is the period with which the get_ambient_temperature_callback_receiver
receiver is triggered
periodically. A value of 0 turns the receiver off.
If the value has to change
-parameter is set to true, the receiver is only
triggered after the value has changed. If the value didn’t change
within the period, the receiver is triggered immediately on change.
If it is set to false, the receiver is continuously triggered with the period, independent of the value.
It is furthermore possible to constrain the receiver with thresholds.
The option
-parameter together with min/max sets a threshold for the get_ambient_temperature_callback_receiver
receiver.
The following options are possible:
Option | Description |
---|---|
‘x’ | Threshold is turned off |
‘o’ | Threshold is triggered when the value is outside the min and max values |
‘i’ | Threshold is triggered when the value is inside or equal to the min and max values |
‘<’ | Threshold is triggered when the value is smaller than the min value (max is ignored) |
‘>’ | Threshold is triggered when the value is greater than the min value (max is ignored) |
If the option is set to ‘x’ (threshold turned off) the receiver is triggered with the fixed period.
The default value is (0, false, ‘x’, 0, 0).
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OFF
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OUTSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_INSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_SMALLER
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_GREATER
sourcepub fn get_ambient_temperature_callback_configuration(
&self
) -> ConvertingReceiver<AmbientTemperatureCallbackConfiguration>
pub fn get_ambient_temperature_callback_configuration(
&self
) -> ConvertingReceiver<AmbientTemperatureCallbackConfiguration>
Returns the receiver configuration as set by Set Ambient Temperature Receiver Configuration
.
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OFF
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OUTSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_INSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_SMALLER
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_GREATER
sourcepub fn get_object_temperature(&self) -> ConvertingReceiver<i16>
pub fn get_object_temperature(&self) -> ConvertingReceiver<i16>
Returns the object temperature of the sensor, i.e. the temperature of the surface of the object the sensor is aimed at. The value has a range of -700 to 3800 and is given in °C/10, e.g. a value of 3001 means that a temperature of 300.1 °C is measured on the surface of the object.
The temperature of different materials is dependent on their emissivity <https://en.wikipedia.org/wiki/Emissivity>
__. The emissivity of the material
can be set with Set Emissivity
.
If you want to get the object temperature periodically, it is recommended
to use the get_object_temperature_callback_receiver
receiver and set the period with
Set Object Temperature Receiver Configuration
.
If you want to get the value periodically, it is recommended to use the
get_object_temperature_callback_receiver
receiver. You can set the receiver configuration
with Set Object Temperature Receiver Configuration
.
sourcepub fn set_object_temperature_callback_configuration(
&self,
period: u32,
value_has_to_change: bool,
option: char,
min: i16,
max: i16
) -> ConvertingReceiver<()>
pub fn set_object_temperature_callback_configuration(
&self,
period: u32,
value_has_to_change: bool,
option: char,
min: i16,
max: i16
) -> ConvertingReceiver<()>
The period in ms is the period with which the get_object_temperature_callback_receiver
receiver is triggered
periodically. A value of 0 turns the receiver off.
If the value has to change
-parameter is set to true, the receiver is only
triggered after the value has changed. If the value didn’t change
within the period, the receiver is triggered immediately on change.
If it is set to false, the receiver is continuously triggered with the period, independent of the value.
It is furthermore possible to constrain the receiver with thresholds.
The option
-parameter together with min/max sets a threshold for the get_object_temperature_callback_receiver
receiver.
The following options are possible:
Option | Description |
---|---|
‘x’ | Threshold is turned off |
‘o’ | Threshold is triggered when the value is outside the min and max values |
‘i’ | Threshold is triggered when the value is inside or equal to the min and max values |
‘<’ | Threshold is triggered when the value is smaller than the min value (max is ignored) |
‘>’ | Threshold is triggered when the value is greater than the min value (max is ignored) |
If the option is set to ‘x’ (threshold turned off) the receiver is triggered with the fixed period.
The default value is (0, false, ‘x’, 0, 0).
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OFF
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OUTSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_INSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_SMALLER
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_GREATER
sourcepub fn get_object_temperature_callback_configuration(
&self
) -> ConvertingReceiver<ObjectTemperatureCallbackConfiguration>
pub fn get_object_temperature_callback_configuration(
&self
) -> ConvertingReceiver<ObjectTemperatureCallbackConfiguration>
Returns the receiver configuration as set by Set Object Temperature Receiver Configuration
.
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OFF
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_OUTSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_INSIDE
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_SMALLER
- TEMPERATURE_IR_V2BRICKLET_THRESHOLD_OPTION_GREATER
sourcepub fn set_emissivity(&self, emissivity: u16) -> ConvertingReceiver<()>
pub fn set_emissivity(&self, emissivity: u16) -> ConvertingReceiver<()>
Sets the emissivity__ that is used to calculate the surface temperature as returned by [Get Object Temperature`.
The emissivity is usually given as a value between 0.0 and 1.0. A list of emissivities of different materials can be found `here](http://www.infrared-thermography.com/material.htm)__.
The parameter of Set Emissivity
has to be given with a factor of
65535 (16-bit). For example: An emissivity of 0.1 can be set with the
value 6553, an emissivity of 0.5 with the value 32767 and so on.
Note
If you need a precise measurement for the object temperature, it is absolutely crucial that you also provide a precise emissivity.
The default emissivity is 1.0 (value of 65535) and the minimum emissivity the sensor can handle is 0.1 (value of 6553).
sourcepub fn get_emissivity(&self) -> ConvertingReceiver<u16>
pub fn get_emissivity(&self) -> ConvertingReceiver<u16>
Returns the emissivity as set by Set Emissivity
.
sourcepub fn get_spitfp_error_count(&self) -> ConvertingReceiver<SpitfpErrorCount>
pub fn get_spitfp_error_count(&self) -> ConvertingReceiver<SpitfpErrorCount>
Returns the error count for the communication between Brick and Bricklet.
The errors are divided into
- ACK checksum errors,
- message checksum errors,
- framing errors and
- overflow errors.
The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.
sourcepub fn set_bootloader_mode(&self, mode: u8) -> ConvertingReceiver<u8>
pub fn set_bootloader_mode(&self, mode: u8) -> ConvertingReceiver<u8>
Sets the bootloader mode and returns the status after the requested mode change was instigated.
You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.
This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_BOOTLOADER
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_OK
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_INVALID_MODE
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_NO_CHANGE
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_STATUS_CRC_MISMATCH
sourcepub fn get_bootloader_mode(&self) -> ConvertingReceiver<u8>
pub fn get_bootloader_mode(&self) -> ConvertingReceiver<u8>
Returns the current bootloader mode, see Set Bootloader Mode
.
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_BOOTLOADER
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT
- TEMPERATURE_IR_V2BRICKLET_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT
sourcepub fn set_write_firmware_pointer(&self, pointer: u32) -> ConvertingReceiver<()>
pub fn set_write_firmware_pointer(&self, pointer: u32) -> ConvertingReceiver<()>
Sets the firmware pointer for Write Firmware
. The pointer has
to be increased by chunks of size 64. The data is written to flash
every 4 chunks (which equals to one page of size 256).
This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.
sourcepub fn write_firmware(&self, data: [u8; 64]) -> ConvertingReceiver<u8>
pub fn write_firmware(&self, data: [u8; 64]) -> ConvertingReceiver<u8>
Writes 64 Bytes of firmware at the position as written by
Set Write Firmware Pointer
before. The firmware is written
to flash every 4 chunks.
You can only write firmware in bootloader mode.
This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.
sourcepub fn set_status_led_config(&self, config: u8) -> ConvertingReceiver<()>
pub fn set_status_led_config(&self, config: u8) -> ConvertingReceiver<()>
Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.
You can also turn the LED permanently on/off or show a heartbeat.
If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_OFF
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_ON
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS
sourcepub fn get_status_led_config(&self) -> ConvertingReceiver<u8>
pub fn get_status_led_config(&self) -> ConvertingReceiver<u8>
Returns the configuration as set by Set Status LED Config
Associated constants:
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_OFF
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_ON
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_SHOW_HEARTBEAT
- TEMPERATURE_IR_V2BRICKLET_STATUS_LED_CONFIG_SHOW_STATUS
sourcepub fn get_chip_temperature(&self) -> ConvertingReceiver<i16>
pub fn get_chip_temperature(&self) -> ConvertingReceiver<i16>
Returns the temperature in °C as measured inside the microcontroller. The value returned is not the ambient temperature!
The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.
sourcepub fn reset(&self) -> ConvertingReceiver<()>
pub fn reset(&self) -> ConvertingReceiver<()>
Calling this function will reset the Bricklet. All configurations will be lost.
After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!
sourcepub fn write_uid(&self, uid: u32) -> ConvertingReceiver<()>
pub fn write_uid(&self, uid: u32) -> ConvertingReceiver<()>
Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.
We recommend that you use Brick Viewer to change the UID.
sourcepub fn read_uid(&self) -> ConvertingReceiver<u32>
pub fn read_uid(&self) -> ConvertingReceiver<u32>
Returns the current UID as an integer. Encode as Base58 to get the usual string version.
sourcepub fn get_identity(&self) -> ConvertingReceiver<Identity>
pub fn get_identity(&self) -> ConvertingReceiver<Identity>
Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.
The position can be ‘a’, ‘b’, ‘c’ or ‘d’.
The device identifier numbers can be found here. |device_identifier_constant|
Trait Implementations
sourceimpl Clone for TemperatureIrV2Bricklet
impl Clone for TemperatureIrV2Bricklet
sourcefn clone(&self) -> TemperatureIrV2Bricklet
fn clone(&self) -> TemperatureIrV2Bricklet
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more