Struct stm32ral::stm32mp::peripherals::gpiof::RegisterBlock [−][src]
#[repr(C)]pub struct RegisterBlock {Show 25 fields
pub GPIOF_MODER: RWRegister<u32>,
pub GPIOF_OTYPER: RWRegister<u32>,
pub GPIOF_OSPEEDR: RWRegister<u32>,
pub GPIOF_PUPDR: RWRegister<u32>,
pub GPIOF_IDR: RORegister<u32>,
pub GPIOF_ODR: RWRegister<u32>,
pub GPIOF_BSRR: WORegister<u32>,
pub GPIOF_LCKR: RWRegister<u32>,
pub GPIOF_AFRL: RWRegister<u32>,
pub GPIOF_AFRH: RWRegister<u32>,
pub GPIOF_BRR: WORegister<u32>,
pub GPIOF_HWCFGR10: RORegister<u32>,
pub GPIOF_HWCFGR9: RORegister<u32>,
pub GPIOF_HWCFGR8: RORegister<u32>,
pub GPIOF_HWCFGR7: RORegister<u32>,
pub GPIOF_HWCFGR6: RORegister<u32>,
pub GPIOF_HWCFGR5: RORegister<u32>,
pub GPIOF_HWCFGR4: RORegister<u32>,
pub GPIOF_HWCFGR3: RORegister<u32>,
pub GPIOF_HWCFGR2: RORegister<u32>,
pub GPIOF_HWCFGR1: RORegister<u32>,
pub GPIOF_HWCFGR0: RORegister<u32>,
pub GPIOF_VERR: RORegister<u32>,
pub GPIOF_IPIDR: RORegister<u32>,
pub GPIOF_SIDR: RORegister<u32>,
// some fields omitted
}
Fields
GPIOF_MODER: RWRegister<u32>
GPIO port mode register
GPIOF_OTYPER: RWRegister<u32>
GPIO port output type register
GPIOF_OSPEEDR: RWRegister<u32>
GPIO port output speed register
GPIOF_PUPDR: RWRegister<u32>
GPIO port pull-up/pull-down register
GPIOF_IDR: RORegister<u32>
GPIO port input data register
GPIOF_ODR: RWRegister<u32>
GPIO port output data register
GPIOF_BSRR: WORegister<u32>
GPIO port bit set/reset register
GPIOF_LCKR: RWRegister<u32>
This register is used to lock the configuration of the port bits when a correct write sequence is applied to bit 16 (LCKK). The value of bits [15:0] is used to lock the configuration of the GPIO. During the write sequence, the value of LCKR[15:0] must not change. When the LOCK sequence has been applied on a port bit, the value of this port bit can no longer be modified until the next MCU reset or peripheral reset. A specific write sequence is used to write to the GPIOx_LCKR register. Only word access (32-bit long) is allowed during this locking sequence. Each lock bit freezes a specific configuration register (control and alternate function registers).
GPIOF_AFRL: RWRegister<u32>
GPIO alternate function low register
GPIOF_AFRH: RWRegister<u32>
GPIO alternate function high register
GPIOF_BRR: WORegister<u32>
GPIO port bit reset register
GPIOF_HWCFGR10: RORegister<u32>
For GPIOA, B, C, D, E, F, G, H, I, J and GPIOK: For GPIOZ:
GPIOF_HWCFGR9: RORegister<u32>
For GPIOA, B, C, D, E, F, G, H, I, and GPIOJ: For GPIOK and GPIOZ:
GPIOF_HWCFGR8: RORegister<u32>
For GPIOA, B, C, D, E, F, G, H, I, and GPIOJ: For GPIOK and GPIOZ:
GPIOF_HWCFGR7: RORegister<u32>
GPIO hardware configuration register 7
GPIOF_HWCFGR6: RORegister<u32>
GPIO hardware configuration register 6
GPIOF_HWCFGR5: RORegister<u32>
GPIO hardware configuration register 5
GPIOF_HWCFGR4: RORegister<u32>
GPIO hardware configuration register 4
GPIOF_HWCFGR3: RORegister<u32>
GPIO hardware configuration register 3
GPIOF_HWCFGR2: RORegister<u32>
GPIO hardware configuration register 2
GPIOF_HWCFGR1: RORegister<u32>
GPIO hardware configuration register 1
GPIOF_HWCFGR0: RORegister<u32>
GPIO hardware configuration register 0
GPIOF_VERR: RORegister<u32>
GPIO version register
GPIOF_IPIDR: RORegister<u32>
GPIO identification register
GPIOF_SIDR: RORegister<u32>
GPIO size identification register