Struct stm32h7x3::mdma::mdma_c14cr::R
[−]
[src]
pub struct R { /* fields omitted */ }Value read from the register
Methods
impl R[src]
fn bits(&self) -> u32[src]
Value of the register as raw bits
fn en(&self) -> ENR[src]
Bit 0 - channel enable
fn teie(&self) -> TEIER[src]
Bit 1 - Transfer error interrupt enable This bit is set and cleared by software.
fn ctcie(&self) -> CTCIER[src]
Bit 2 - Channel Transfer Complete interrupt enable This bit is set and cleared by software.
fn brtie(&self) -> BRTIER[src]
Bit 3 - Block Repeat transfer interrupt enable This bit is set and cleared by software.
fn btie(&self) -> BTIER[src]
Bit 4 - Block Transfer interrupt enable This bit is set and cleared by software.
fn tcie(&self) -> TCIER[src]
Bit 5 - buffer Transfer Complete interrupt enable This bit is set and cleared by software.
fn pl(&self) -> PLR[src]
Bits 6:7 - Priority level These bits are set and cleared by software. These bits are protected and can be written only if EN is 0.
fn bex(&self) -> BEXR[src]
Bit 12 - byte Endianness exchange
fn hex(&self) -> HEXR[src]
Bit 13 - Half word Endianes exchange
fn wex(&self) -> WEXR[src]
Bit 14 - Word Endianness exchange