Struct stm32h7::stm32h743v::adc3::cr::W

source · [−]

pub struct W(_);

Expand description

Register CR writer

Implementations

source

impl W

source

pub fn adcal(&mut self) -> ADCAL_W<'_, 31>

Bit 31 - ADC calibration

source

pub fn adcaldif(&mut self) -> ADCALDIF_W<'_, 30>

Bit 30 - ADC differential mode for calibration

source

pub fn deeppwd(&mut self) -> DEEPPWD_W<'_, 29>

Bit 29 - ADC deep power down enable

source

pub fn advregen(&mut self) -> ADVREGEN_W<'_, 28>

Bit 28 - ADC voltage regulator enable

source

pub fn lincalrdyw6(&mut self) -> LINCALRDYW6_W<'_, 27>

Bit 27 - Linearity calibration ready Word 6

source

pub fn lincalrdyw5(&mut self) -> LINCALRDYW5_W<'_, 26>

Bit 26 - Linearity calibration ready Word 5

source

pub fn lincalrdyw4(&mut self) -> LINCALRDYW4_W<'_, 25>

Bit 25 - Linearity calibration ready Word 4

source

pub fn lincalrdyw3(&mut self) -> LINCALRDYW3_W<'_, 24>

Bit 24 - Linearity calibration ready Word 3

source

pub fn lincalrdyw2(&mut self) -> LINCALRDYW2_W<'_, 23>

Bit 23 - Linearity calibration ready Word 2

source

pub fn lincalrdyw1(&mut self) -> LINCALRDYW1_W<'_, 22>

Bit 22 - Linearity calibration ready Word 1

source

pub fn adcallin(&mut self) -> ADCALLIN_W<'_, 16>

Bit 16 - Linearity calibration

source

pub fn boost(&mut self) -> BOOST_W<'_, 8>

Bits 8:9 - Boost mode control

source

pub fn jadstp(&mut self) -> JADSTP_W<'_, 5>

Bit 5 - ADC group injected conversion stop

source

pub fn adstp(&mut self) -> ADSTP_W<'_, 4>

Bit 4 - ADC group regular conversion stop

source

pub fn jadstart(&mut self) -> JADSTART_W<'_, 3>

Bit 3 - ADC group injected conversion start

source

pub fn adstart(&mut self) -> ADSTART_W<'_, 2>

Bit 2 - ADC group regular conversion start

source

pub fn addis(&mut self) -> ADDIS_W<'_, 1>

Bit 1 - ADC disable

source

pub fn aden(&mut self) -> ADEN_W<'_, 0>

Bit 0 - ADC enable

source

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CR_SPEC>>

source

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

source

impl Deref for W

type Target = W<CR_SPEC>

The resulting type after dereferencing.

source

fn deref(&self) -> &Self::Target

Dereferences the value.

source

impl DerefMut for W

source

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

source

impl From<W<CR_SPEC>> for W

source

fn from(writer: W<CR_SPEC>) -> Self

Converts to this type from the input type.

Auto Trait Implementations

impl RefUnwindSafe for W

impl Send for W

impl Sync for W

impl Unpin for W

impl UnwindSafe for W

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct stm32h7::stm32h743v::adc3::cr::W

Implementations

impl W

pub fn adcal(&mut self) -> ADCAL_W<'_, 31>

pub fn adcaldif(&mut self) -> ADCALDIF_W<'_, 30>

pub fn deeppwd(&mut self) -> DEEPPWD_W<'_, 29>

pub fn advregen(&mut self) -> ADVREGEN_W<'_, 28>

pub fn lincalrdyw6(&mut self) -> LINCALRDYW6_W<'_, 27>

pub fn lincalrdyw5(&mut self) -> LINCALRDYW5_W<'_, 26>

pub fn lincalrdyw4(&mut self) -> LINCALRDYW4_W<'_, 25>

pub fn lincalrdyw3(&mut self) -> LINCALRDYW3_W<'_, 24>

pub fn lincalrdyw2(&mut self) -> LINCALRDYW2_W<'_, 23>

pub fn lincalrdyw1(&mut self) -> LINCALRDYW1_W<'_, 22>

pub fn adcallin(&mut self) -> ADCALLIN_W<'_, 16>

pub fn boost(&mut self) -> BOOST_W<'_, 8>

pub fn jadstp(&mut self) -> JADSTP_W<'_, 5>

pub fn adstp(&mut self) -> ADSTP_W<'_, 4>

pub fn jadstart(&mut self) -> JADSTART_W<'_, 3>

pub fn adstart(&mut self) -> ADSTART_W<'_, 2>

pub fn addis(&mut self) -> ADDIS_W<'_, 1>

pub fn aden(&mut self) -> ADEN_W<'_, 0>

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Methods from Deref<Target = W<CR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Trait Implementations

impl Deref for W

type Target = W<CR_SPEC>

fn deref(&self) -> &Self::Target

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

impl From<W<CR_SPEC>> for W

fn from(writer: W<CR_SPEC>) -> Self

Auto Trait Implementations

impl RefUnwindSafe for W

impl Send for W

impl Sync for W

impl Unpin for W

impl UnwindSafe for W

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,